Tesla Model 3 / Y x Nalgene Bottle Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This bottle holder has an inside diameter of 94,5 mm (3,72 in) at the top. The outside diameter at the bottom part is…
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 80
- Makes
- 0
- Views
- 458
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This bottle holder has an inside diameter of 94,5 mm (3,72 in) at the top. The outside diameter at the bottom part is 81 mm (3,19 in).
PETG didn't make it this summer. It deformed a bit because of the sun and the pressure at the lower part. The current one is ASA.
It can be printed without support from low to top. If you're using ABS or ASA you may need a little bit support and brim at the rounded part.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
**Rafts:**
Yes
Supports:
Yes
**Resolution:**
0.2
Infill:
30 %
**Filament:** FormFutura ASA - ReForm Apollo black
Category: Automotive