1 / 5
Cylindric Lampshade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a multi-part and multi-color lamp shade.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 95
- Makes
- 0
- Views
- 717
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
Thank you for supporting me!
This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!
Design
This is a lampshade I have created to replace the original lampshades of two bedroom lights.
Printing instructions:
- decide whether you need the version with a deep mount or a flat mount. The deep mount can be used both ways - to higher or to lower the shade against the bulb socket.
- print Shade, TopFrame, BottomFrame, and either Flat- or DeepMount
- for the Shade, use your slicer's vase mode
- other parts go standard with e.g. 25% infill
- I have used a 0.4mm nozzle and 0.2mm layer height
- no supports required
Assembling instructions:
- glue both the top and bottom frames to the shade; take care the shade is going slightly into the frames' groove
- snap the bottom frame to the mount part selected
Off-topic:
In case you are interested in electronics and want to know how to “smartify” a lamp like this - here are the instructions: Harry's Smart Lamp