Cat Litter Scoop
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€7.11 – €8.69 net (excluding VAT)
For file: Cat Litter Scoop v10_0.3mm_PETG_MK3S_6h25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.90 excluding VAT (range midpoint).
- Weight reported by the author
- 139 g
- Print time reported by the author
- 6.42 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Refined shape for cleaning extra large cat litter box.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 97
- Makes
- 0
- Views
- 442
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
GizmoGorilla's design was great, I just needed something a little narrower. Also refined the lead edge to get in the corners better.
Printing notes:
- PETG (black, or anything very dark).
- .30 mm draft layer (this was only to cut down the printing time).
- 4 perimeter layers.
- Support on build plate only.
I have added a step file to make it easier to alter the slot widths, handle, leading edge, etc.
I did have issues with the support material sticking to the bottom side of the handle. More that usual. It took a while to clean up. Prusa MK3S defaults were used except as noted above. Not sure if it was because of the higher layer thickness. Any suggestions would be welcome.
I did not take a picture of the print after it was first done and at this point I really don't think you want to see a picture of it. 😜