1 / 1
Sigma Butler GoPro Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A GoPro-compatible mount for the Sigma Short or Long Butler bike computer mount.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 22
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Description
A GoPro-compatible mount that attaches to the underside of the Sigma Short or Long Butler.
Analogous to the official version from Sigma (see here), however with no waiting involved.
I used this to mount my headlight along with its official GoPro mounting bracket.
Required Hardware
- 2*M3 DIN562 Square Nuts
- 2*M3x10mm Countersunk Head Screws
- 1*M5 Hex Nut
- 1*M5x20mm Screw (for clamping)
Printing Instructions
Print the model on one of the diagonals (such that the M3 nut impressions stick out the top).
This ensures good printability and, most of all, good directional strength.
I can easily twist the Sigma Long Butler with this setup without any sign of failure.