Onewheel XR Surge Fender
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sport utility fender for Onewheel XR with attachment points
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 52
- Makes
- 0
- Views
- 473
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Use 1" wide velcro straps to attach the cylindrical objects of your choice
(drink bottles, bluetooth speakers, etc) to your ride. Printed buckles hold
the three sections together. The risers add another 2.4mm of tire clearance
if necessary.
Please note that when printed in PLA+, the fender will not survive more than
mild impacts. It will be much stronger when printed in nylon CF/GF.
The included .3MF file should be used with BambuStudio or OrcaSlicer, and
the STL files are pre-rotated to the parts' recommended print orientations.
Suggested print settings:
3-8 walls
15-20% infill
no supports except for the buckle
Credits: the buckle design was inspired/stolen from the Enduro Fender model
by aMakerKev on Thingiverse. [https://www.thingiverse.com/thing:5569928]