Counting matching models…
Covers to put your YubiKey 5 or 5C into when you can't leave it in your computer. Designed for attaching to a lanyard with a loop end or keychain. Design was inspired by the Thingiverse post, but CAD work was done by me in Fusion360 for…
Freezer door key for Frigidaire, Kenmore, GE freezers. Fits the square locks. Fits the same lock as these from Amazon . >[REPLACES PART NUMBER]: Manufacturer Part Number: 216702900. Replaces Part Numbers: 216702900 06599905, 08037402,…
Coupler for keeping CPAP hose together so it doesn't come unhooked in the night. Also likely good for extension cords or any other connections in need of reinforcement. Separate variables for: Internal length Overall internal diameter…
Bathroom organizers for toothbrushes, razors and sinus rinse bottles. Print instructions Print default 0.2mm settings, increasing walls to 3 layers if extra strength is desired. Lay 'toothbrush' model on it's back with the large flat…
Wall mount bracket for the Cloud Gateway Max. The Max, unlike the Ultra, has cooling vents along the base so I simply added clearance for airflow.
I installed a Raspberry Pi Zero 2 W shortly after they came out but found it ran a bit hot, around 66°C at idle because there is limited air flow to the CPU since it faces the Einsy RAMBo board. I worked up a design with a fan for…
This AppleTV mount was designed to fit on the back of my 24" TV with an Inland 141 TV mount on a 100mm VESA mount using the M4 x 12mm screws provided with the Inland kit. The 12mm screws just barely fit my TV so 14-16mm would be better.…
Avoid tech support calls for the Meeting Owl 3 when their USB-C port that is unsupported comes unplugged. Users just don't look at the bottom of the Meeting Owls when they loose connection. I designed this to fit the cords we received…
Designed to hold a 10.2" iPad hanging off the back of a 2022 Toyota Sienna console. 195mm space for tablet should fit most cases and other tablets. Also fits 2021 Toyota Sienna. Hooks are thin enough to allow console door to open. I…
Side spool holder for those who (like me) don't have top clearance. Can be mounted on either side vent port. 50mm square hole pattern for M3 bolts. Fits screws that ship with the enclosure. Recommended settings (what I used): 0.2mm layer…
Insert for the Trial by Trolley card game box to organize the 3 different cards sets and tokens. Token box has a bottom to prevent cards from slipping under the cards. My son's first design :) Print instructions Printed 0.20 layer height…
Cloned the ‘hook’ from the ‘buffer holder’ front leg to provide better attachment of the buffer to the printer. Just watch the power supply cables to ensure it doesn't push or interfere with the wiring. Print with standard MMU3 part…
I really think the cord design of the Meeting Owl is tech support waiting to happen with a micro USB port that is unsupported. While the barrel plug for power is also, most users can successfully plug the cord in without issues. Micro USB…
Power Plate Cover for Printed Solid Next Gen Safety Enclosure. Tighten up your enclosure for temperature control or pest control (critters like warm places). Uses standard M3 hex nuts (5.5mm). Recommended settings (what I used): Filament…
Brackets to mount a Creative Stage Air speaker on a Vizio D24f-G1 TV using the feet mount holes when it is hung on the wall with a VESA mount. Includes retainer clips to hold the speaker from sliding out the end. To attach, mount one…
Bracket to hang the Expandable Steel Sheet Holder on the side of a Printed Solid Next Gen Safety Enclosure. Printed it in PLA with 3 perimeters, with rectilinear infill but otherwise standard. If you use the STL you will need to separate…
Been noticing my Raspberry Pi Zero 2 isn't happy when I am printing in an enclosure as it gets a bit warm. It idles around 55 C so needed cooling is needed. Decided to make an easy enclosure that doesn't rework the factory setup too much.…
Duct to supply fresh air to MK3 power supply in the Printed Solid Next Gen Safety Enclosure. Designed to cover the lower ⅔ of the intake vents when my printer is on a paver and padding. Should fit the upper ⅔ of vents if no paver is in…
The Zwift rubber band mounts were ok but were never very solid, sliding as my workout progressed, and I had to mount them too far from my grips due to the shifter and brake arrangement. Their 3D printable mounts were a good improvement in…
Topographic map of the main valley at Zion National Park in Utah. Covers the main valley and the East Entrance. Pulled data using TouchTerrain and sliced in PrusaSlicer to add color changes. Colors shown (base to mountain tops): Marble…
Ever since we started printing with Input Shaper, it has been hard to maintain the nice sheen so many filaments are made for. The MK4 SPEED profile goes up to 170 mm/s leading to matte or mixed finishes. The STRUCTURAL profile only goes…
I designed this to mount my iPhone 12 Pro Max (should also fit iPhone 13 Pro Max) on the stem of my 2019 Giant FastRoad SL3 bike. Giant re-uses their parts all over so I am sure this would work fine on other Giant bikes. It uses fine…
Replacement for the rubber bike rests for the Saris trailer hitch bike rack. Replacement parts are not available anymore for this rack. Found compatible replacement straps but couldn't find the bike rests so I created them in PLA so the…
I saw the Xometry sample prints in their ads and realized they are based on the Polypanel system. Time for me to make samples we all can print, and play with! These are pretty basic samples, with 1-6 layers thick and bridging (0.2mm…
Simple mounting bracket to allow mounting an Actiontec DSL modem with double sided tape (command strips, etc).
Shelf to place my clothing steamer on in my laundry room. Power outlet isn't anywhere near the shelves so I had to create a place for my steamer. Designed to fit a 2" ID PVC drain pipe that has a ~60mm OD. Shelf is a 92mm diameter with…
These are all currently available results.
