Counting matching models…
List of parts used for this assembly: Remixed parts Wall HoneyComb 2x8 (3x) - remixed part Pin 6x20mm M3 (1x) - remixed part Parts from original model Insert-CounterSunk (3x) Insert_M3 (2x) Cover-contersunk (5x)…
[EN] Tag is designed for Dymo label 12mm width. Tag size: 20x61x2,5mm Label size: 12x34mm Recommended material PETG. When using the Ironing function, you achieve a very smooth surface even on the top of the model. See also my model…
[EN] Description DIN rail mount enclousre for IEC socker with switch and fuse. This model is using DIN rail brackets by Fabian Bill of material All printed parts are in Switch Box DIN Rail.3mf file - 1set. JR-101-1-FRSG-02 - Un-Filtered…
[EN] This is a wall mount enclosure for Sonoff Basic with cable gland PG3 and snap fit cover. Enclosure has been tested with Sonoff Basic R2 Enclosure is printed from PETG with layer height 0,2mm. Enclosure outer size is (LxWxH)…
This case fits to adapter USB 2.0 to TTL UART 6P IN CP1204 STC PRGMR. Adapter is used to flash Tasmota into Sonoff (and other) IoT devices. https://arduino-shop.cz/arduino/1731-adapter-usb-2.0-na-ttl-uart-6pin-cp2104-stc-prgmr.html Print…
[EN] Gridfinity bin fro sotring Brother TZe tapes. Standard size 3x3x5 units (X Y Z). Model has been created in Fusion 360 using GridfinityGenrator by Lev Mishin. [CZ] Gridfinity krabička pro ukládání pásek Brother TZe. Standartní…
[EN] The holder allows you to label Yours water/heating pipes using a standard Dymo labeler. There are 2 versions of the holder for 12 x 50mm labels (total holder size 17 x 67mm) for 9 x 50mm labels (total holder size 14 x 67mm) The…
[EN] Replacement of the inner part of the case buckle for Nikon Nivo 5.M/Focus6/Focus8/Trimble M3 total station. Tested on Nikon Nivo 5.M case only - see photos. The entire buckle including this inner part can be ordered at…
[EN] My Marantec Comfort 220 garage door stopped opening properly. The cause was that the reference point that activates the switch inside the drive had fallen off the toothed belt. A replacement reference point can be purchased as a…
[EN] This bracket is designed for mounting on a wall with a plinth 12mm deep and max 85mm high. The charger cable can be attached to the bracket with zip ties. The eyelets for the zip ties are integrated directly into the holder. I have…
[EN] Spare fuel tank cap for AL-KO Highline 46.8 SPI - Brigss&Stratton 575iS engine. Print Material: PETG Number of perimeters: 4 Supports: No Additional material Rubber o-ring. Inner diameter approx. 30mm. I used the ring from the…
[EN] This is clip on DIN rail holder for current measuring transformer Acrel type AKH-0.66 K Ø24 . It is used in photovoltaic installations. Width of holder is 15mm. Recomend to use PETG material. Print on side. [CZ] Toto je nacvakávací…
[EN] The adapter consists of 3 parts: bottom part middle part a snap-on lid The bottom and middle part are connected by 4 self-tapping screws 2,9x9,5mm. Designed for use with standard hepa filters for Roomba 800/900 vacuum cleaners .…
[EN] The hook is designed for hanging the Ikea SOCKER plant pot on the Ikea ÄPPLARÖ wall panel. Bill of material: Hook body - Main.stl - 1pc Clip - Clip.stl - 1pc 12cm Ikea Socker plant pot - 1pc Screw M3x12 - 2pcs Nut M3 - 2pcs Printing…
[EN] This is enclosure for Sonoff TH to mount on top of standard European wall electrical installation box (diameter 70 mm). Used screws: 3x16mm (4 pcs) Created in Fusion 360 Print instructions Material: PET-G Infill: 15% Layer height:…
[EN] Holder for a small carpenter 3D square for the Honeycomb Storage Wall. Works well with the “insert-hollow-for” provided in the original Honeycomb storage wall . Designed for this square: ENJOYWOOD 3D Multi-Angle Measuring Ruler…
[EN] A simple clip for attaching the power cord when storing the Silvercrest contact grill. Grill type: Manufacturer: Lidl Brand: Silvercrest Model: SKGET 2000 A1 Printing: Print the orientation as shown in the 3mf file. I recommend…
[EN] To illuminate the LACK cover on the printer I used a Zigbee light from Lidl, where you can also buy a Zigbee button with a magnetic holder to control the light. Unfortunately the original pad is designed for a standard wiring box and…
[CZ] Klíč je nutný pro snadné otevření mixeru při čištění. Výrobce nedodal jako originální příslušenství. Testováno na skleněném mixeru 1,5l ETA 1128 99000 , který se používá s následujícími kuchyňskými roboty: ETA1128 90000 Metalic II…
[EN] I designed this coil to store and carry a plumb bob without the hassle of a tangled string. This model was specifically designed for the Conmetallmeister COXT792101 plumb bob , which is commonly sold in Hornbach stores. To secure the…
These are all currently available results.
