Counting matching models…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
The Spine chain was made popular by @rogerquin_304616 when he designed it for the SOVOL SV06 . This is my version for the Anycubic Kobra 2 Series printers. This is my original work and drawings all inspiration for this design goes to…
Easy Install version Snap-On set of bed sheet aligners. Compatible with factory bracket, Also Strain Relief & Cable Chain Anycubic Cable Drag Chain Anycubic Strain Relief PETG Print with 15% to 20% infill. Left Mount needs support:…
" Anycubic Key " 2 Tools in One Extruder Tension disengage tool & Proximity Sensor height tool. Disengage tool allows you to disengage extruder tensioner. Gives you the ability when you load your filament all the way without having to…
Merry Christmas from the Fresh Prints, Hope everyone has a happy & safe holiday. Thanks Anycubic Community for all the support. You all have made this worth doing. This cable drag chain system to help keep your bed cables in great shape.…
Back Left Mount V3 Now compatible with Cable Drag Chain OEM Strain Relief Installation: 1, Hook the bottom corner under bed of OEM bracket first. 2. Hold the corner you hooked bring it around the bed. 3. Then press down on top of bed…
These Dial Indicator Mounts are specifically designed for the Clockwise Dial Indicator and rebranded variants of it. May work with others untested. Here is Amazon link to purchase Clockwise Dail Indicator Clockwise Dail Indicator with…
Move your Kobra 2 filament runout sensor to the extruder with this mount! Placing the sensor closer to the extruder reduces filament wasted at the end of a spool, Great for top mounted spool holders and varies other locations. 3 Model…
Merry Christmas from the Fresh Prints, Hope everyone has a happy & safe holiday. Thanks Anycubic Community for all the support. You all have made this worth doing. This cable drag chain system to help keep your bed cables in great shape.…
Cable Clips for the X-Axis. Print Intrusions: PLA or better 100% infill Pair well with this one. This will protect you X Axis Cable from damage. Anycubic Tie Wrap Replacement for X-Axis
This allows redirection of filament for easier travel to hot end when printing with a top mounted spool holder. Installation and Design explanation: Runout Senor Bracket: Tighten down the bolt to sensor bracket to the bottom base. Then…
This Strain Relief works with your OEM cable bracket. No disassembly required. Just tie wrap and your good to go. Also including a file for clone of OEM bracket, in case you want to change the color to match your new strain relief. The…
All items were measured and model specifically for the Anycubic Kobra2 Max. Just Download and print no muss no fuss. Complete Cover kit premeasured. For any other printers I have included 2 files so you can make your own DIY Route…
“The Rook” This is a Quick way to check your X-Axis Gantry is parallel with bed. And adjust Z-Axis rods to get them back in sync. The Rook was designed to be a quick and easy way to get your gantry back parallel to bed when it's knocked…
The flow rate calibration is done in order to fine tune the amount of plastic extruded by the printer. Also known as Extrusion Multiplier , by calibrating the flow rate you can fix issues caused by under-extrusion or over-extrusion.…
Brackets to support the heater bed cable from drooping down and snagging destroying itself. Includes a place to use a tie wrap if you wish but don't need it 25% Gyroid infill. Alternative New Version : Anycubic Kobra 2 Max Bed Cable…
These TPU feet are designed to decouple the BedSlinger from other 3D printers on the same surface by absorbing vibrational energy, helping to minimize machine wear caused by vibrations. Benefits When you place a single printer on the…
Back Left Mount v2: includes 2 different options for mounting. (updated 11/29/2023) One with larger holes for M3 heated inserts. One with smaller holes for a through bolt to add a locknut. Can be used with or without a strain relief. Back…
Cut a new PTFE tube for your Kobra 2 Serie Printer with confidence. Already premeasured just insert and cut. Note: This is the correct length from factory. If after you cut PTFE tube and you insert, and it appears to long. You will need…
This mount allows you to use your stock holder and bolts on the top of Kobra 2 Max. This mount allow you to print at max Z height without crashing into the holder. Runout sensor bracket can be found here for this spool holder…
The tie wrap they tell you to put on the X-Axis to hold the cable crushes the cable and will damage overtime. Here is a fix to keep your cable flat and in good condition and not being crushed. Print Intrusions: PLA or better 100% infill…
Made a filament sensor bracket so I can use my dryer box with the printer using M10 fitting. Added Supports arms to keep runout sensor in align. solve problem sensor would easily twist and turn and put filament in a bind. Print…
This mount allows you to print at max Z height without crashing into the holder. Use with this filament runout sensor mount addon to redirect filament in a smoother path.…
The camera mount is aligned to see the nozzle close up even when doing a nozzle wipe and calibration. This is the best current option for the Kobra 2 Series printers uses external Wyze App. Does Not work with Anycubic App. The reason this…
Simple support to fix the issue with only having one screw mounted in runout senor. Will keep sensor in alignment. Keep sensor from moving back and forth causing unneeded friction.
Dial your bed In. Parametric Shims work with your Stock Hard Spacers and Silicone spacers found on AliExpress or Amazon Premade Shims for Stock Factory Spacer and Silicone Spacer if you don't want or need to adjust the size. No worries…
Never worry about your belt knobs vibrating themselves loose again. Easy Install set your belts to desired tightness. Then pop this cap over your existing one. Easy as that. Printing: 20 to 25 infill / with paint on supports on on wings…
Easy manage your cables on your printer with these simple extrusion cable clips.
Shut your loud machine up for good. Make your fans Wisper Quiet @ 19.9db Works for all Kobra 2 models This is taller than stock PSU cover you will need taller feet Here a link to some feet that work well Bambu Lab Anti-Vibration Feet List…
Build Plate Shape and Texture for Slicers for the Kobra 2 Max The texture and build plate model are included in .zip in other files download.
Simple Bracket to relocate your X-Gantry Cable. Solve problem with cable being in the way. Allows better travel of the cable. You will need to reroute existing cable from underneath the printer to use this bracket. I have included several…
Build Plate Shape and Texture for Slicers for the Kobra 2 Pro The 4 textures and build plate model are included in, zip in other files download. Version 2: Corrected the Gold Texture Plate. Upload the wrong file when first posted. :( The…
This is an addon for your stock OEM Spool Holder. Allows you to easily add a filament runout sensor. Was made with tight fitment so would not slip during use without using the tightener bolt hole on the side. Just added it as an extra…
Brackets to support the heater bed cable from drooping down and snagging destroying itself. This is great option when space is limited when you need to place the printer close to a wall as possible to maximize space. Redesign of my…
Never worry about your belt knobs vibrating themselves loose again. Easy Install set your belts to desired tightness. Then pop this cap over your existing one. Easy as that Printing: 20 to 25 infill / with paint on supports on on wings…
SV08 Antivibration Feet "Bambu Style" Hardware: Reuse original bolts to fasten feet. Printing instructions: Print Antivibration Feet in TPU. No Supports Needed. 10 to 15% infill. 3 walls for vertical and horizontal top and bottom. The…
Shut your loud machine up for good. Make your fans Wisper Quiet @ 19.9db Works with Kobra 2 Max List on Materials: Use a Noctua 12V fan you can use either a 92x14mm or 80x25mm just download corresponding model. I prefer the 92mm fan…
This is for the people that don't want to print antivibration feet in TPU and rather have the real deal. Easily mounts to extrusion. Print: 100% Infill No supports Install: Official Bambu Version: Just use your either M3 or M4 metric bolt…
Build Plate Shape and Texture for Slicers for the Kobra 2 Max The texture and build plate model are included in ,zip in other files download
Build Plate Shape and Texture for Slicers for the Kobra 2 Max The texture and build plate model are included in ,zip in other files download
Wire Grommet: While doing mods I noticed the opening from Heated Bed MOSFET compartment to Mainboard the Wires are resting on a sharp edge of metal from the PSU with all the vibration of machine this area has potential to cut wires cause…
The Heated Bed MOSFET Box top opening is too small. This will fix that. Also Includes Wire Grommet. Optional Upgrades to model: Panel Mount Fuse Holder Optional to fuse for LED light circuit. Dust Mesh Filter : create your own filter to…
Top Cable Bracket Locknuts_ Add M3 Locknuts Top Cable Bracket Heated Inserts and Locknuts Add M3 Heated Inserts with M3 Locknuts. OEM Clone Cable Bracket in case you like the original and just want to change the color. (Remember to dry…
Amazon link to buy spot welder I used with this enclosure. https://www.amazon.com/dp/B098T2H1XQ?_encoding=UTF8&psc=1&ref_=cm_sw_r_cp_ud_dp_26TBKKX2E8P3319EHRGN
These are all currently available results.
