Counting matching models…
A simple, yet effective garden spike to write the name of the plant on. I found that 1.2mm is a good width to make the spikes strong, yet flexible. Adjust as you like. You can print about 10 spikes in 1:20 with a layer hight of 0.20mm.…
A chart to compare items against your 3D-printed measurements. Very useful if you are creating 3D designs or sorting bolts. Swap your color to change the color of the measurement, or use a sharpie to highlight them! The threads left and…
Added safety when leaving an Wago connector exposed. Can be mounted with 2 screws and 2 small cable ties. Use the cable strain relief points to reduce the risk of damaging the wires. Not suited for outdoor use, only use if you know how to…
Added safety when leaving an in-line Wago connector exposed. Can be mounted with 4 small cable ties. Use the cable strain relief points to reduce the risk of damaging the wires. Not suited for outdoor use, only use if you know how to work…
A chart to compare items against your 3D-printed measurements. Very useful if you are creating 3D designs and want to feel what your tolerances are going to be. Swap your color to change the color of the measurement, or use a sharpie to…
Replacement knobs for the HVAC system, my old knobs were sticky and the plastic is rubberized. Insert is a different part to give it a different color. Remember PLA deforms under load, especially in combination with car heat. It does work…
Insert for the button port on the Volvo S40 Model can also be used as template for USB port e.g. Keep in mind that PLA deforms under load, especially in a hot car.
A chart to compare items against your 3D-printed measurements. Very useful if you are creating 3D designs and want to feel what your tolerances are going to be. Fusion 360 files added, feel free to remix your own! Let me know if you want…
Simple wall bracket to hold a tube or line with a diameter of 10-20mm with a screw. The tube in the pictures is 16mm. Secure the bottom half with a screw. The top half should clip right onto the first half. Fusion 360 file added, feel…
Changed to 6x3mm round magnets. Can be press fit, add super glue to be sure they stick.
These are all currently available results.
