All models

Counting matching models…

PrintablesND

Nokia XS-010X-Q Wall Mount

Nokia Modem Wall Mount

Downloads: 229
Likes: 7
Rating: 5

Order a print of this model

PrintablesND

TipToi Replacement Tip for Gen 4 perfect fit

Print in ASA with 3 layer raft, draft shield 2 loops, supports and 15% infill.

Downloads: 199
Likes: 12
Rating: 5

Order a print of this model

PrintablesND

Inbus T Handle T Series Table Stand and French Cleat Wall Mount

I wanted an organization for my Inbus T-Series (T-Griff) screwdrivers that could stand on top of a table as well as hang on a french cleat wall. I designed the stand so it could take all 8 screwdrivers, but still be printable on a small…

Downloads: 151
Likes: 16
Rating: 0

Order a print of this model

PrintablesND

Comfee AC exhaust hose wall adapter mount

Print with 0.2mm 20% infill 4 perimeters for the perfect balance between sturdy and flexible Concentric infill for a nice look !!! The model is a very tight fit, you might need to sand a little !!!

Downloads: 106
Likes: 15
Rating: 0

Order a print of this model

PrintablesND

Wii Sensor Bar Top Mount

Mount your Wii sensor bar on top of your Philips 65OLED873

Downloads: 96
Likes: 10
Rating: 5

Order a print of this model

PrintablesND

Metabo ASC 145 Battery Charger Wall Mount

No supports needed. Print with a high layer height for extra sturdiness. I've designed a hollow cone inside the pins for a higher break resistance.

Downloads: 94
Likes: 8
Rating: 0

Order a print of this model

PrintablesND

Mailbox

Recommended print settings: PETG 0.25mm Structural on 0.4 nozzle Nozzle temp first 3 layers 230°C, otherwise 240°C Print bed 80°C min 4 perimeters, 4 layers top and bottom gyroid infill 10% Provided Prusa XL gcode is configured for…

Downloads: 91
Likes: 12
Rating: 0

Order a print of this model

PrintablesND

Pattfield Dust Hose Adapter 35 and 40

Print in PETG, 0.25 Structural and 15% infill. It's a tight fit. I wanted a longer dust hose, and this one from Hornbach (https://www.hornbach.lu/de/p/ersatzteil-saugschlauch-5m-fuer-pattfield-5883584/5897850/) has a great price for the…

Downloads: 58
Likes: 18
Rating: 0

Order a print of this model

PrintablesND

Prusa XL - Upgrade Package with official parts that have changed since march 2024

I'm unable to add individual parts of a model to a collection. So this is the next-best thing. Hope this saves you time from searching around. Words of wisdom before you tweak your printer: If you want to exchange the 'dwarf cover base'…

Downloads: 41
Likes: 10
Rating: 5

Order a print of this model

PrintablesND

Bessey KP Framing System Block / KP Rahmenpresse

An adapted version of the originally sold KP Framing Block / KP Rahmenpressen-set from Bessey. I needed a version that I could fix to my MFT table

Downloads: 35
Likes: 7
Rating: 5

Order a print of this model

PrintablesND

Esge Unold Zauberstab Accessories Drawer Organizer

I was fed up with having to search for a specific accessory for my Esge Zauberstab. These little cutting heads were rolling around each time I opened or closed the drawer, so I designed an organizer.

Downloads: 24
Likes: 4
Rating: 0

Order a print of this model

PrintablesND

xTool M1 Ultra Power Supply Mount

It's a tight fit. Put the part with the cable in first, tilt the power supply until the inlit for the power plug rests against the mount. Insert a thin metal blade or sliding help between the mount and the power supply and bend the mount…

Downloads: 20
Likes: 5
Rating: 0

Order a print of this model

PrintablesND

Prusa XL Stress Test

This model was completely created using Prusa Slicer. My friends and I wondered how long it would take to print a maximum size volume on our respective printers and how much material would be consumed. Prusa XL Speed 0.2mm 0.4 Nozzle Easy…

Downloads: 20
Likes: 5
Rating: 0

Order a print of this model

PrintablesND

Handtuchhaken 241mm Lochabstand Towel wall hook

Montage mit Schrauben <5mm dicke und Kopf kleiner als 11 mm Mount with screws below or equal to 5mm thick and head, smaller than 11 mm. Print in place without supports.

Downloads: 19
Likes: 1
Rating: 0

Order a print of this model

PrintablesND

Chicken Waterer - Hühnertrog

This is a two part print which consists of the main water recipient and the faucet. You will need a Gardena Micro Drip System to connect this to. Check out their website, it is very well explained. I'll try to help in the comments if you…

Downloads: 18
Likes: 9
Rating: 0

Order a print of this model

PrintablesND

Skadis Vertical Cable Channel -optimized for 3d printing without supports-

Downloads: 18
Likes: 2
Rating: 0

Order a print of this model

PrintablesND

Philips Billy HR1340 Clutch Replacement

Print in Nylon standing up, with the bigger base to the bottom, with a two layer skirt at a distance of 0.1mm from the object. This will give the necessary adhesion, but the skirt will be easier to remove from the print-bed than a brim.…

Downloads: 15
Likes: 2
Rating: 0

Order a print of this model

PrintablesND

Joseph and Joseph Rolling Pin Thickness disk organizer

An organizer for the different thickness disks of the Joseph and Joseph rolling pin (Joseph Joseph JJ20085)

Downloads: 15
Likes: 4
Rating: 0

Order a print of this model

PrintablesND

Marker and Post-it Organizer

Marker and Post-it Organizer with a hidden message for my wife

Downloads: 14
Likes: 4
Rating: 0

Order a print of this model

PrintablesND

Stokke Steps Chair Glider Replacement

Don't print in PA / Nylon. This has tendance to leave sandy white marks on the floor. Use ASA instead. It's a very tight fit.

Downloads: 12
Likes: 1
Rating: 0

Order a print of this model

PrintablesND

Router jig R10

I needed something to cut a nice R10 curve into wood. Of course the shops were closed and I was blocked. Quick design, fix it in place using a clamp and follow with a flush trim cutter bit.

Downloads: 11
Likes: 4
Rating: 0

Order a print of this model

PrintablesND

Sandbox lid rest

I wanted the sandbox covers to rest in a 60° angle and designed these lid holders.

Downloads: 11
Likes: 3
Rating: 0

Order a print of this model

PrintablesND

Kitchen Drawer Organizers

While reorganizing my kitchen, I'm designing and solving problems as I progress. This is specific to Schmidt Küchen Drawers, but might fit to others. I would love if you could comment about your experience.

Downloads: 10
Likes: 4
Rating: 0

Order a print of this model

PrintablesND

Nextruder holder for the XL Fan Shroud 360° with clearance for Wiha Joker 7

Nextruder holder for the XL Fan Shroud 360° with clearance for Wiha Joker 7 with or without (you) sock

Downloads: 9
Likes: 4
Rating: 0

Order a print of this model

PrintablesND

Schmatzfatz Bunko Lunchbox Replacement Fork

Print in ASA, smoothen with Acetone and put into dishwasher to be sure to have a 'clean' surface.

Downloads: 9
Likes: 2
Rating: 0

Order a print of this model

PrintablesND

Allit Europlus Labels 2.0

Print in PETG at structural with 0.4 mm nozzle in 0.15mm or 0.25mm nozzle at 0.08mm for a clearer text. The PrusaSlicer Project has all the labels pre-colored for the Prusa XL for nozzles 2 and 3. There is a blank version. Print it in…

Downloads: 8
Likes: 2
Rating: 0

Order a print of this model

PrintablesND

Metzler Türklingel Montageplatte

Print in ASA for best results

Downloads: 7
Likes: 1
Rating: 0

Order a print of this model

PrintablesND

Allit EuroPlus Labels

Print with 0.4mm nozzle in PETG, 0.20 structural with 15% infill and 2 perimeters. There is a blank version you can print in white and label by writing with a permanent marker on it. If you need another text, please drop a comment with…

Downloads: 7
Likes: 1
Rating: 0

Order a print of this model

PrintablesND

Teufel Musicstation Remote Wall Mount

A wall mount for the remote control of the Teufel Musicstation. The mount can either be screwed using a 3x20mm countersunk screw, or glued with adhesive.

Downloads: 6
Likes: 2
Rating: 0

Order a print of this model

PrintablesND

Wall Mount for Nintendo PSU Cable Management Solutions

This is a wall mount for the excellent cable management solutions from 24masks and oceanduck. https://www.printables.com/model/69374-gamecube-psu-cover-for-cable-management…

Downloads: 6
Likes: 1
Rating: 0

Order a print of this model

PrintablesND

Delonghi Dehumidifier DDSX220WFA Water drain

Works in PETG but better in PA or TPU 95A

Downloads: 4
Likes: 1
Rating: 0

Order a print of this model

PrintablesND

Unitec 577780 Mount

Print laying on it's side. Watch the correct orientation for the point of the teardrop facing upward. No supports needed. Print with 20% infill or less for a good flexibility.

Downloads: 3
Likes: 1
Rating: 0

Order a print of this model

PrintablesND

XL Nozzle Replacement Tool for Livius's XL Fan Shroud 360 with Clearance for Wiha Joker 7 wrench

I like the 360 Cooling Fan Shroud, and the nozzle replacement tool, but I want to use my Wiha Joker 7.

Downloads: 3
Likes: 1
Rating: 0

Order a print of this model

PrintablesND

Tesa Powerstip mount for Hats, Caps, Beanies aso

Attach your hat or base cap to a smooth wall using this mount an Tesa Power Strips M. No holes, no nails, no screws, remove them completely without residue. On the picture they are glued to the side of an Ikea Pax wardrobe

Downloads: 3
Likes: 1
Rating: 0

Order a print of this model

PrintablesND

Schneider Ampelschirmplattenverschluss

This model is a replacement / spare plug, for the Schneider Ampelschirmplatten so it's an Ampelschirmplattenverschluss. You need a 27x3 O-ring to make it water tight. Print in ASA or PETG.

Downloads: 2
Likes: 1
Rating: 0

Order a print of this model

PrintablesND

Parkside PPWD Bajonette Replacement Ring

Print in ABS, ASA, PA, PETG 100% infill.

Downloads: 2
Likes: 1
Rating: 0

Order a print of this model

These are all currently available results.