Counting matching models…
This device is designed to print without supports and be used to cut cardboard strips to make a device for cats to claw at and scratch. This devices requires a standard utility blade and works well with an M3*10, M3*12, or M3*14 screw. An…
This model extends the injection molded part that comes with the Prusa Mk3 family of printers so that it can hold 2kg spools and remain compatible with the Prusa Enclosure. Printing Orientation I recommend printing this vertically (as…
A tensegrity model that can be printed without supports. I included the source files if you would like to edit it. Assemble using fishing line. I recommend the two half hitches as a knot as it can be tightened after tying. Remember to…
Uses an m3 nut and m3x12 screw to bolt a handle onto the nub leftover on your broken dipstick. You will need to drill a hole in your dipstick to attach it. Print it on its side (close to the orientation it comes in) with a little bit of…
I edited this model by Mframe on thingiverse because when I tried to use it on a Boeing 737, the clip broke. I edited the model by extending the hanging part by 10mm which should provide enough space for it to hold securely. Print it on…
I designed this stand to hold Hotwheels and to model a 2 post lift. I wanted to make it correct to scale but that wasn't strong enough to hold the cars so this is as close as I could get. I hope you enjoy. A second car can fit below the…
Remixed throttle pedal extension for NA and NB Miata MX5s. It now uses M4 nuts instead of heat set inserts. I highly recommend using Nyloc nuts for this. Countersunk M4 screws fit nicely in the pedal without protruding into your foot.…
Description: The dashboard of my car has a 12v socket that sticks out like a sore thumb, but my car didn't come with a dummy to fill it. This solves that issue. I designed this to fit within the 12v socket and blend in with the dashboard.…
Replace your lost headlight knob covers in the engine bay of your NA Mazda Miata (Mx5). I recommend printing them straight up and with support so they look nicest on the outside. I highly recommend printing them in TPU as they will have…
An enlarged version of the Minimalist Key Organizer by revere521. I really liked his model but wanted to fit my keys better including a car key. I kept the fitment of the M3 nut because it was excellent, and noticed that m3 bolt heads fit…
Replaces the flowers and the nozzle on the hummingbird feeder so that they are one piece which makes them easier to clean. I printed with PETG so that it is foodsafe for the birds. Best printing orientation is face down, no supports are…
A simple airpods case which allows them to stand up. There is a hole in the bottom so that you can charge it while in the case. I recommend printing in TPU so you can still press the button while in the case, and to just give it more…
The Angels stadium sign is iconic so I designed this to be a desk ornament. The Halo should be printed on its own and then later installed (glue or not). I included one that can be printed without supports (easier to print), but I only…
I designed this to hold an alcohol bottle with a diameter of 57mm securely to the Prusa Enclosure. It is secure enough to where I don't remove the bottle if I move the enclosure. I made sure it is mounted low enough to be compatible with…
Fits underneath the side of the center console and holds your iphone securely in place while driving. It was designed for this phone case specifically: https://www.printables.com/model/236257-iphone-se8-case/comments/1042786 Source files…
A simple jack pad cover that slips over the pad of the jack to prevent scratching up the jack and your car. Print with TPU or something else that is flexible so that you can squeeze it on. 95A worked well for me and stood up to the abuse…
A simple and easy to print belt hanger that should fit on most printers. The hanger is strong with PETG, and easily holds 6 belts. The hanger remains steady even as belts are added or removed. Given the hook shapes, belts are secure and…
This simple print helps you mount stuff to square poles using zip ties. When I tried mounting a bird house to a square post using zip ties, it was difficult to get the zip ties tight enough because the zip ties don't want to make a 90…
Extension for GB125 Reacher oil pan so that the oil catch is higher (replicates a part no longer included with the pan). This part is a remix; the original part matched the custom threads of the oil pan perfectly but required supports.…
This was designed for the Ultimaker S3 and S5 so it is easy to see which filament and color is loaded in each extruder. The holder plugs into the USB port on the front of the printer, and the nametags slide in from the side. I included a…
I have really enjoyed my Lihan Bluetooth FM Transmitter (see link below) apart from the fact that its screen blinds me when driving at night. I devised this screen cover to block the light which solved the problem. I never looked at the…
A compliant holder for the pin of the jack stand. It locks into place using the pin's mechanism, fits tightly, and won't shake off. Uses minimal filament.
This model improves the fitment of the NA Miata armrest screw cover. You can see the new vs old fitment in the picture. It should be printed face down (as oriented in the model). I printed it on a textured bed so it has some wrinkle…
These are all currently available results.
![Filament Nametags + Holder [USB Mount] for Ultimakers](https://media.printables.com/media/prints/546243/images/4392537_4bf9ff7c-5487-498e-a727-e42239a00635/nametags-cropped.png)
