Alcohol Bottle Holder for Prusa Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alcohol Bottle Holder that attaches securely to the Prusa Enclosure
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 54
- Makes
- 2
- Views
- 427
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this to hold an alcohol bottle with a diameter of 57mm securely to the Prusa Enclosure. It is secure enough to where I don't remove the bottle if I move the enclosure. I made sure it is mounted low enough to be compatible with Prusa's tool holder (https://www.printables.com/model/253162-tool-holder-for-original-prusa-enclosure).
Mounting
It mounts to the front right corner of the enclosure with two M3x8 bolts from the inside. The M3x8 I used were spares from building the enclosure.
Printing
No supports are needed for any of the versions of this model. The part should be oriented as it is in the file when printing. All of the other settings are not critical. I printed in Jungle Green Prusament PETG.
Versions
I first designed this to mold to the outside of the enclosure on multiple sides, and I printed it and enjoyed it. I later realized that some parts of the model aren't needed, so I have several versions with varying bits of it removed and they are named as such, and ordered below from most to least geometry. I like the aesthetics of it forming to the corner, but take your pick!