Counting matching models…
The basic idea is that there is a hand with holes in it, which holds a soap. So the water of the wet soap can run off and does not dissolve the soap. This model is a remix of Teak's Hand which was passed through this cool Voronoi online…
Boy Scout Slingshot Remix (Print One For A Kid!) This is a remix of Bill Hays Boy Scout Slingshot ( http://www.pocketpredator.com ) with holes for the pinky. You can find the original model here:…
[2018-03-28] User i_has_it found out that the only thing to make it work with S3D is to adapt the layer change script like that: ;LAYER:[current_layer] [2018-01-25] Thanks to user groenewaldd's hints in the comments i have adapted the…
These is an openscad script that lets you create wheels in 4 different flavours: 1. round 2. flat 3. pointed 4. inward V On each side of the wheel 608-2RS ball bearings can be fitted. These bearings are usually used in skateboards and…
This is a simple openscad module that can be used to create 7 different boxes with rounded corners. I use them to design differently shaped containers with rounded corners/edges. Print instructions Category: Other Summary This is a simple…
This bottle pourer was originally designed for my beloved chili oil - but it can be used for any liquid. At least now I can regulate the amount of that hot stuff much better and hopefully wont spoil entire meals any more. The design…
Openscad script that lets you create adapters from hoses with different diameters to vacuum cleaners. I have created this model because I wanted to hook up the dyson vacuum cleaner to a cyclone shop vac.
This is a stencils that makes it easier to cut out the pouches for a slingshot. They are modelled after these instructions on YouTube by 1611torsten : How to make the fastest slingshot bands; extreme speed PART 1 . They are customizable -…
This is a specialized version of the 'Pluggable Containers' thing: https://www.thingiverse.com/thing:4675184 . It lets you create different symmetrical pluggable containers in the openSCAD and thingiverse customizer. These could be used…
This openscad script lets you create bushings for tubes.
This is an openscad library that lets you design a lot of different pluggable containers easily. It works quite well as far as I have tested it, but be careful because it is still work in progress. For some printers it might be necessary…
Simple 3D library for openscad that makes it easy to generate the most common bar and tube profiles. See also: " https://github.com/quirxi/BarsAndTubes ". Print instructions Category: Other Summary Simple 3D library for openscad that…
This is a simple x-belt tensioner for the Anet A8 printer. I wanted a x-belt tensioner that fulfils following criteria: G2 geared tooth pulley should fit (the last tensioner I used was too small to accommodate the geared pulleys) pulley…
This is a openscad module for designing drawers. Print instructions Category: Containers Summary This is a openscad module for designing drawers. Print Settings Printer Brand: Prusa Printer: i3 MK3 </div> Rafts: No Supports: No </div>…
This is a simple customizeable storage box for ER11 collets. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20 Infill: 15% Cubic Filament: Prusa PETG Cyan Category: Tool Holders & Boxes
This is a tool that uses the friction of a rubber in order to remove single lenses from an objective. It can be adapted in openscad to diameters of different lenses. I have printed it in TPU with a shore of A95 and its probably on the…
Openscad script that lets you create protectors for table legs.
This is a replacement part for a BG53 balcony handle. Das ist ein Ersatz für einen BG53 Balkontuergriff. The distance between the two outer screws is ca. 59 mm. Der Lochabstand zwischen den 2 äusseren Schrauben beträgt ca. 59 mm. Print…
This is a plug for the Exo Rexy Kayak ( https://exokayak.com/product/rexy/?lang=en ).
This is a corner brace for the Anet A8 printer to stabilize the frame in the z-axis. It works really well - even without the screws in the front and sides. For the front side I have used 3mm screws that were provided with the Anet A8…
I will use these corner clamps together with lashing straps for making wooden trolleys for the workshop. In order for the clamps to withstand the pressure while gluing I used TPU filament with 4 perimeters and 50% infill. That keeps them…
This is a parametric openscad file that lets you create customized boxes, drawers etc. They can be made stackable and closed with fitting lids if needed. Furthermore these boxes can be subdivided by customizable compartments along the X…
This is a customizable (parametric) openscad script that lets you create a barbed adapter between a (water) pipe and a hose. I created it because I needed an adapter from the faucet to an ¼ inch (~6mm) ID hose for a Liebig condenser. The…
This is a remix of jag's "Parametric Flyswatter" ( https://www.thingiverse.com/thing:9927 ). I just fixed the bug that the corners were not rounded properly when creating rectangular fly swatters instead of quadratic ones. Also fixed a…
For the CNC machine I am going to build I needed some milling cutter holders. Therefore I remixed the "Pluggable Containers" thing in order to be able to adapt the box to different numbers and shaft diameters of various milling cutters.…
A knife scabbard made out to of TPU that can be worn on the belt on the backside of your trousers. I designed this knife as an utility knive with a very low profile so that it can be carried around easily. The knive was forged with 3…
A very minimalistic and small case for the XYS3580 buck-boost converter. It's meant to protect the electronics on the ba
This design makes it possible to mount a 65 mm watercooled (china) spindle to the original 611-plate of the LowRider2 (see: https://www.thingiverse.com/thing:3064287 and https://www.thingiverse.com/thing:4276347). Print Settings Printer…
Parametric openscad script that lets you generate a transition between a larger and a smaller pipe using a half sphere.
I printed this in order to organize all the button cells that were lying around in a drawer. This is a quick hack that served my needs well, but its probably not useful for others unless you know how to tweak the openscad file I have…
A simple bitholder that can be mounted to a wall with a double sided tape. The bitstorage holds the bits in a 45° angle so that it can be easily grabbed even with bigger fingers. The number of bits it can carry is adaptable in the…
I needed a new lens cover for my laser range finder because the old one was worn out and did not stay put anymore. Therefore I have created this one as a parametric design in openscad so that it can be adapted to other lens diameters…
This adapter connects a 3" fire hose to a G 1-1/2" outer thread on a pump. The model was printed in blue TPU and in a first test water pumping test it worked flawlessly. This pump with the fire hose is put into a plastic box with a lot of…
This is a remix of Extrutim's zip tie. Its just a bit longer - between 29-30 cm long and fits hardly on heat bed of my printer. It's a remix of the ‘hard’ version for TPU 95A.
Simple lens covers for the ocular and objective of the Bresser 10x25 Condor monocular.
These are all currently available results.
