All models

Counting matching models…

E3D Revo collet

Printed in Schichtwerkstatt fast modeling resin (water washable) with minimal Monocure Flex 100 resin to prevent the print from breaking.

Downloads: 440
Likes: 43
Rating: 5

Order a print of this model

Printablesdanielkrah

Capacitive Soil Moisture Sensor V1.2 case waterproof

:edit 23.04.2024 added version for mounting on a wooden board. Use 3mm wood screws.

Downloads: 361
Likes: 32
Rating: 4.75

Order a print of this model

Printablesdanielkrah

A replacement NUT for the T8 Nut because all available on thingiverse or so doesn't fit ... Print instructions I used normal PLA with the normal PLA settings in prusa slicer ... The nut has a tight fit. It is better if you heat up a spare…

Downloads: 343
Likes: 20
Rating: 4

Order a print of this model

Printablesdanielkrah

[~50g filament usage] ESUN, ROSA3D, Prusament, Kraus spool (1Kg refill coil)

This spool is designed to use with threaded inserts I used the ones from cnckitchen: http://cnckitchen.store/shared-products/431146823?ref=v1:431146823:-1510512723 If you use the “inner - minimal” then a full spool need less than 50g. 6x…

Downloads: 225
Likes: 31
Rating: 5

Order a print of this model

Printablesdanielkrah

Rundgewinde DIN 168 Flaschendeckel mit GL 40 Gewinde

Ersatzdeckel für Flaschen mit GL40 Gewinde. Es gibt Deckel mit integriertem Flachband. Um einen geschlossenen Deckel zu drucken, einfach den Deckel mit einer flachen Scheibe in PrusaSlicer verschliesen. (Siehe Fotos)

Downloads: 130
Likes: 13
Rating: 0

Order a print of this model

Printablesdanielkrah

Prusa MK3 fan on MK2(s) mount

EDITED the link to the fan shroud Cover to mount the MK3s fan on a MK2(s) Use with: https://github.com/prusa3d/Original-Prusa-i3/blob/c8636c8c46cbeab26ecc7677116d2acbe86df7a1/Printed-Parts/STL/fan-shroud.stl…

Downloads: 121
Likes: 9
Rating: 5

Order a print of this model

Printablesdanielkrah

hex adapter for hex bits

A hex bit adapter to use the small ones in a tool for the big ones.

Downloads: 116
Likes: 21
Rating: 5

Order a print of this model

Printablesdanielkrah

MGN12 2020 long mounting nut

You will need the short inserts: https://www.cnckitchen.com/shop#!/Gewindeeinsatz-threaded-insert-M3-Short-100-Stk-pcs/p/431146045/category=0

Downloads: 105
Likes: 15
Rating: 0

Order a print of this model

Printablesdanielkrah

f connector cap / Sat F Stecker Kappe

A small cap to protect the inner wire when not attached to something. Due to a f360 bug threads from older files can be broken. The one on this Model is a M10 one.

Downloads: 90
Likes: 5
Rating: 0

Order a print of this model

Printablesdanielkrah

wall mount beer cap catcher

An easy to remove box to catch some beer caps.

Downloads: 87
Likes: 13
Rating: 5

Order a print of this model

Printablesdanielkrah

y-belt holder modified to work with mechanical endstops

to use with this https://www.thingiverse.com/thing:2808922

Downloads: 71
Likes: 5
Rating: 0

Order a print of this model

Printablesdanielkrah

V0 toolhead - V6 + flying bear ghost 6 feeder

There is also a strain relief for the cables available: https://www.printables.com/model/485602-strain-relief-for-v0-toolhead-v6-flying-bear-ghost

Downloads: 64
Likes: 13
Rating: 0

Order a print of this model

Printablesdanielkrah

AirGradient DIY case

4x M3-30 screws + 4 inserts are needed. https://cnckitchen.store/products/schraube?variant=47867092009295 + https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m3-standard-100-stk-pcs The connector i used:…

Downloads: 50
Likes: 12
Rating: 0

Order a print of this model

Printablesdanielkrah

Small Keystone panel 1x, 2x and 4x

The models need support. Arrange them like in the picture for easier suport removal.

Downloads: 47
Likes: 7
Rating: 0

Order a print of this model

Printablesdanielkrah

1 KG Refill Adapter uses Prusament sides

Adapterring for 1 KG Refillcoils. 8x M3 screws and nuts are required. Printed at 0.2mm layer height. Sacrificial support on the top holes but minimal support is needed.

Downloads: 45
Likes: 9
Rating: 5

Order a print of this model

Printablesdanielkrah

Prusa MK3 on MK2 fan mount, aligned filament path 1mm for toms3d Dolly

This part enables you to use the MK3 fan shroud on a Prusa MK2 (Dolly). for use with: https://www.thingiverse.com/thing:2261050 Source: (Original part was the original by Prusa on GitHub, converted from openscad to STEP and then imported…

Downloads: 43
Likes: 5
Rating: 5

Order a print of this model

Printablesdanielkrah

ANTPCBMAKER head modded for 28mm motor

Search for: N2830 11 1000KV 270W on ebay or AliExpress. on: https://bitbucket.org/compactpcbmaker/cpcbm based on: https://bitbucket.org/compactpcbmaker/cpcbm/src/master/mechanics/head/head_4p2.stp Modded Source file will follow when…

Downloads: 42
Likes: 4
Rating: 0

Order a print of this model

Printablesdanielkrah

Clamp to join to LACK tables

Uses M3 hardware

Downloads: 41
Likes: 12
Rating: 0

Order a print of this model

Printablesdanielkrah

LMC Münsterland deluxe broken roof lever replacement

Printing in ABS/ASA is recommended because then it is possible to glue it together with acetone.

Downloads: 41
Likes: 8
Rating: 0

Order a print of this model

Printablesdanielkrah

advertising display hook fix

A replacement for broken hooks.

Downloads: 40
Likes: 8
Rating: 0

Order a print of this model

Printablesdanielkrah

Das Filament Spool Holder for 2,3 Kg Spools

This is a spool holder for the xxl spools from Das Filament: https://www.dasfilament.de/filament-spulen-xxl/ The spools are evil @ the first meter's but then all is fine ;-) My 2 prints failed because the spool wasn't in a holder during…

Downloads: 30
Likes: 8
Rating: 5

Order a print of this model

Printablesdanielkrah

Sennheiser HD380 Pro after market cable retainer

This is a plug for easily inserting an after market cable into the headphones. I am using this cable for 7 month now and it is still great. https://www.ebay.com/itm/310729934016?var=610208201486 I printed it in PLA 3 perimeter, 4-5…

Downloads: 27
Likes: 6
Rating: 0

Order a print of this model

Printablesdanielkrah

mount for Sacr3D Etching 's https://www.prusaprinters.org/de/prints/64576-mini-12864-screen-cover-and-brackets-for-bear-fram

Print one normal one mirrored. The cover was made by Sacr3D Etching https://www.prusaprinters.org/de/prints/64576-mini-12864-screen-cover-and-brackets-for-bear-fram

Downloads: 25
Likes: 6
Rating: 0

Order a print of this model

Printablesdanielkrah

Clone Titan Prusa MK2 mount (Tevo, Two Trees)

REMIX of: https://www.thingiverse.com/thing:2065461 Source: extruder body https://a360.co/34zpTQ2 carriage https://a360.co/3b5ZgDF

Downloads: 25
Likes: 6
Rating: 0

Order a print of this model

Printablesdanielkrah

Papertowel holder for use with Ikea LACK

Using a wooden rod prevents the roll from easily sliding off. Also you can't easily roll off the entire roll because of the frictional resistance.

Downloads: 23
Likes: 18
Rating: 0

Order a print of this model

Printablesdanielkrah

Soda Stream bottle holder for 2020 square tube

A simple holder for one Soda Stream bottle (plastic) to mount on a square tube Needs 3x threaded inserts 2x M3-12 screws 1x M3-18 screw

Downloads: 22
Likes: 3
Rating: 0

Order a print of this model

Printablesdanielkrah

Storage box for cnckitchen's soldering tips

Storage box for cnckitchen's solder tips which are available here: https://bit.ly/3O19Vm2 ( https://www.cnckitchen.com/shop#!/Lotspitzen-Soldering-Tips-M2-x-M3-M4-M5-M6-1-4-M8-100-Lead-and-Cadmium-FREE/p/458812241/category=0 ) Stefan…

Downloads: 22
Likes: 6
Rating: 0

Order a print of this model

Printablesdanielkrah

Strain relief for V0 toolhead - V6 + flying bear ghost 6 feeder

Strain relief for: https://www.printables.com/model/485593-v0-toolhead-v6-flying-bear-ghost-6-feeder

Downloads: 21
Likes: 4
Rating: 0

Order a print of this model

Printablesdanielkrah

8015 to 9025 fan adapter

If you need a 9025 fan and you only have one 8015 then this model is for you.

Downloads: 21
Likes: 5
Rating: 0

Order a print of this model

Printablesdanielkrah

Siemens SIWAMAT FLAUSCHTROCKNER 285 knob

It is designed to print without supports and uses bridges. You have to remove/break away all the blue colored walls. :edit I have uploaded a new version which is easier and cleaner to print. It is also more stable. Source file is also…

Downloads: 19
Likes: 2
Rating: 0

Order a print of this model

Printablesdanielkrah

Hexnut holder for MK52 heated bed frame.

It can be glued with super glue on the carriage. Should be printed at least with PETG better in ABS

Downloads: 18
Likes: 5
Rating: 0

Order a print of this model

Printablesdanielkrah

BTT raspberry pad5 - PCB casing

I broke the cables for the backlight and the repair wasn't successful. So i designed this casing for using the pcb standalone for a cm4. There is no sd card slot because the one on my board never worked. I boot the cm4 lite over usb, or i…

Downloads: 16
Likes: 5
Rating: 0

Order a print of this model

Printablesdanielkrah

Rubber feet mold for the Bear 2.1 frame

A mold to create some rubber feet for the bear 2.1 frame. I used the TFC silicone by TROLLFACTORY Mixing ratio: 40g component A 40g component B ~3,6g black pigments (or more XD ) The original screws doesn't work with the screws anymore…

Downloads: 15
Likes: 5
Rating: 5

Order a print of this model

Printablesdanielkrah

BTT raspberry pad5 case for 2020 profiles

threaded inserts needed (M3)

Downloads: 14
Likes: 6
Rating: 0

Order a print of this model

Printablesdanielkrah

Bear 2.1 flat cable cover

Print it in PETG or ABS because it is below the MK52. I use a Duet3d mini5+ and a MKS 12864 mini display !!! Maybe it fit also for the prusa Display. Otherwise you have the source MOD it. :D Have fun.

Downloads: 13
Likes: 6
Rating: 0

Order a print of this model

Printablesdanielkrah

[~17g filament usage] Dazzle (Dazz3d whatever) L120 lcd display mount

For LS055R1SX04 5,5 Zoll 2560x1440 on Aliexpress https://www.aliexpress.com/item/4000163557010.html?gatewayAdapt=glo2deu&spm=a2g0o.9042311.0.0.27424c4dBMjizs You have to buy option 2 with glass and the straight cable It is important to…

Downloads: 12
Likes: 2
Rating: 0

Order a print of this model

Printablesdanielkrah

Mastech MS8233B-CE15 hanger for 2020 square tube

Mastech MS8233B-CE15 hanger for 2020 square tube 3 zip ties needed Zip ties are not that easy to insert, but it works

Downloads: 11
Likes: 3
Rating: 0

Order a print of this model

Printablesdanielkrah

DD cine S2 slot plate

Not supports needed they are modeled in.

Downloads: 10
Likes: 2
Rating: 0

Order a print of this model

Printablesdanielkrah

Ikea LACK 20 cm squaretube hanger.

For mounting the two parts together: 2x M4 16/20 mm 2x cnckitchen's M4 threaded inserts. There is a clamp for the 2020 squaretube in the bottom which needs a M4 screw and nut. No supports needed but it is beneficial to use more than 2…

Downloads: 10
Likes: 11
Rating: 0

Order a print of this model

These are all currently available results.