Counting matching models…
Original Quadra-symmetric RC10 project page: https://www.rc10talk.com/viewtopic.php?f=35&t=38327 ----------------------- PRINTING: Print the parts in upright position with the hinge pin and shock mounting holes pointing up. This way pin…
RC10 front arm mounts with M3 screw mounting. Shock tower screws M3x14. Chassis mounting screws M3x12. Stock RC10 hinge pins. PRINTING: No supports needed. Material: PETG or something stronger. No PLA. Layer height: 0.2mm Perimeters: 5+…
Original RC10B2/B3/T3 Graphite project page: https://www.rc10talk.com/viewtopic.php?t=32679 You will get good quality and strong printed parts if you order them somewhere SLS printed in PA12 material. MJF will work nicely also. All carbon…
The 28mm version is for the front tires and the 40mm version is for the rear tires. You can stack two 28mm or 40mm racks together or make a mix as long as you have mounted the two magnets (3x8mm) in opposite directions. One magnet plus…
NIX63111 Motor mount brace for RC10 Graphite. Fits also NIX91.
Custom parts for mounting RPM73282 (Bandit) rear arms on RC10. Arm itself has 3deg toe-in therefore this arm mount has 0deg toe-in. Both 1deg and 2deg anti-squat arm mounts included in this set. B4-series CVA/CVD bone and wheel needed.…
Similar hub as ASC6365 or ASC7364 but uses big outer bearing. One extra camberlink hole inside original. Uses bearing pack ASC3977 (3/16 x 3/8") + ASC7933 (spacer) + ASC7935 (.187x.50x.196"). Same as B4.1FT, SC10.2, B44.1.
Hex Wheel Conversion Hub for RC10, NIX91 or NIX10M. One extra camberlink hole inside original. Uses bearing pack ASC3977 (3/16 x 3/8") + ASC7933 (spacer) + ASC7935 (.187x.50x.196") . Same as B4.1FT, SC10.2, B44.1. Uses B44 rear CVA bone…
These are all currently available results.
