Counting matching models…
Prusa MINI+ no logo front&rear plate with honeycomb pattern based on original R7 parts. In my version there is no cut for motor cables in rear panel like in MINI+ cast parts. This cut was used in MINI assembly guide to route motor…
Both parts (hex-center-part and clock-back-bracing) prints without suports. UPD 20.11.2024 Add files of the numeral characters, 12, 3, 6 & 9 with their framed background, hour and minute hands, that were at original designes(switched to…
Meanwell LRS-350 enclosure for bear 2.1 frame with additional RS-25 power block. This parts can be usefull if you want to power your Raspberry or led strip lights with different voltage than the main LRS block has.…
Prusa i3 MK2.5S/MK3S X carriage with M3 heat set inserts based on original R7 stl. This model made for heat set inserts like in Voron Sourcing guides - M3x5x4 (https://aliexpress.ru/item/4000232858343.html or the same from another…
This is a remix of https://www.thingiverse.com/thing:3726118 The bracket model is without changes. Fasteners: M3x14 SHCS - 8 pcs M3x5x4 heat set inserts - 8 pcs (https://aliexpress.ru/item/4000232858343.html) I printed this model with…
MK3S+-Einsy-base-M3-heat-set-inserts_rev2 - for MK3S family without cutout for RPi MK3S+-Einsy-base-RPi-M3-heat-set-inserts_rev2 - for MK3S family with cutout for RPi BEAR-Einsy-base-M3-heat-set-inserts_rev2 - for BEAR Upgrade without…
This model made for heat set inserts like in Voron Sourcing guides - M3x5x4 (https://aliexpress.ru/item/4000232858343.html or the same from another supplier) There are two versions with E3D logo and without it. Support enforses stl-file…
The same dimentions as in original model that feets MK3/MK4 print area, but cutouts for 5 and 6 sheets for Prusa MK3 (MK4). So you can use 5 or 6 sheet holder with 4er feet , from original design.
This is a compilation of two awesome designs - Filament buffer for Original Prusa i3 Multi Material upgrade by Michal Fanta and Tool box parametric by Yanev with additional M6 thread for PC4-6 fittings. Fasteners: M3x18(20) BHCS - 2 pcs…
This is a remix of In3DSpace design which allow you not to disassemble your z axis while mounting led light bar. You need to tape M5 thread at the top of aluminium extrusions like it shown on photo. Some of suppliers of the BEAR frame kit…
Remix of the original R2 part inspired by the first revision of https://www.printables.com/model/247005 design with M3 heat set insert. This model made from original step file for M3x5x4 heat set inserts. .step and .stl - files are…
This spoolholder made from original Switchwire spoolholder to fit 2020 or 2040 aluminium extrusion. There are two versions of files in attachments: for v-slot aluminium exrtrusions and for non-v-slot aluminium extrusions.
IK style addon for Work Stuff Canyon spray head as in IK MULTI TR 1 360 to replace original IK one with another color. .step and .stl - files are available in attachments. UPD 22.10.2025: add rev2 files without cutout on the top of the…
This model made for heat set inserts like in Voron Sourcing guides - M3x5x4 (https://aliexpress.ru/item/4000232858343.html or the same from another supplier) and M2x3x3 heat set insert for FS sensor screw As body cover part I used like in…
This model designed for 2020 extrusions, PC4-M6 fittings and 3magnets with 6mm x 3mm dimentions(such in voron's soursing guide). There are three models in * . step and * .stl - for 2020 extrusion (v-slot and non v-slot) and for dryer PTFE…
Original x-end R8 design with M3x5x4 heat set insets. To melt the inserts on the holes besides the rods you may use screws (for example M3x10). Side cuts at the top and the bottom that used to check the correct position of the rods…
Modification to allow for thick wires on the Prusa Heated Bed made by InnovationWorkstation with M3 heat set inserts on the cover. The Body model without changes. Fasteners: M3x10 SHCS - 2pcs M3x12 SHCS - 1pcs heat set inserts M3x5x4 -…
Remix of an original R2 design with M3 heat set inserts - M3x5x3 for parts cooling fan screw, M3x5x4(5) for MINDA holder. The idea of using short heat set insert for part cooling fan was to make clean look x-carriage. .step and .stl -…
This is a remix of original design for MINI/MINI+ printers without cable cut for filament sensor. This mod could be usefull when you don't use original filament sensor or you have Bondtech IFS extruder.
This thing saves the settings of knobs while the pedal is in bag or at gig. There are two models R4 and R5 - they differ by mounting type to the pedal. First mounting type(R4) is by control knob's nuts(it needs to remove knobs and nuts…
Remix of the stock MK3S+ R6 X idler which allows rod length adjustment. The final length is locked in place using two M3x10 screws and square nuts. Only valuable for custom builds, such as the full bear upgrade. You can also use this…
This is a remix of original R8 design with replacing M3 square nuts to M3 heat set inserts and some mods to make this part assemble a little bit riggit than the stock one. MINI-z-bottom-R8-M3-heat-set-inserts - original R8 design with M3…
This is the original design of enclosure for https://github.com/wuxx/nanoDLA No supports needed. Fasteners: M2x6 selftaping screw - 4pcs For led light you may use piece of a transparent filament with lenght about 3mm. .step and .stl -…
This is a remix of an original desing https://github.com/gregsaun/prusa_i3_bear_upgrade .It made for M3x4x8 heat set inserts to use with M3x18 screw from Bear Upgrade. There are two stl-files in attachment - for Bear Upgrade MK2.5 and for…
Prusa MINI LED light bar with side mount to 3030 extrusion for 15x6 aluminium profile with hex pattern same as on my front&rear plates . Fasteners: M5x16 BHCS - 1 pcs M5 T-nut for 3030 extrusions - 1 pcs (Optional for R1.1) M3x4 FHCS - 2…
Delta-P fan duct V2-R2.2 for MK3S(+) extruder cover with M3 heat set inserts Fasteners: heat set inserts M3x5x3 - 4pcs (3 - instead of M3 hex nuts, 1 - for M3x14 screw for extruder fan) Other fasteners are the same as in original design.…
Remix of my x carriage R7 with M3 heat set inserts to install e3D REVO v6(TriagleLab CHC TD6) with straight cable routing. MK3S+-x-carriage_R7_M3-heat-set-inserts_REVO_CHC - carriage MK3S+-x-carriage-back-REVO-CHC - back part of the…
I printed this model with carbonfilled Nylon CF15 by fillamentum on Original Prusa smooth PEI sheet.
This is a compilation of two awesome designs - Prusa mk3s+ Revo SIX Anti Turn Mount (Body OR Cover, YOU decide!) by Surfalex2000 and Prusa MK3S+ extruder m3 inserts edition by Retro-Repair . Fasteners: M3x4.6x5 heat set insert - 3 pcs…
This part is remixed from original R8 design to fit heat set inserts. Fasteners: M3x4.6x5 heat set insert - 4 pcs I used colorFabb XT-CF20. UPD 10.10.2023 rev2: Fix the holes dimentions. Now the holes diameter 4.25mm instead of 4.0mm
Prusa MINI extruder placeholder with IFS(Integrated Filament Sensor) for MINI direct drive printhead conversion. This model based on CM3D Extrusor MINI + FS model with straight filament path. There are different versions of the…
Add holes for M3 heat set inserts in the roller and add a non v-slot version of base.
Air valve knob for MJJC foam canon. As it mentioned at valve description by MJJC, it might fit Standart, Pro and S series foam canons. I tested it only on MJJC foam canon Pro(v2). I print it out of PETG with 2 perimeters, 100% infill and…
The same dimentions as in original model that feets MINI/MINI+ print area, but cutouts for 4 and 5 sheets for Prusa MINI. So you can use 4 or 5 sheet holder with 3er feet , from original design.
Original design you can find at https://github.com/gregsaun/prusa_i3_bear_upgrade/tree/master/printed_parts/mk2s_mk2.5_mk2.5s/stl This model made for heat set inserts M3x5x4 for endstop holder and M2x3x3 for endstop mounting. I printed…
Prusa Mean Well LRS-350-0xx mount with cables through the bottom to route them like in MK3S+. This is a remix of parts called “Drill“ in original design. There is also a extra bottom .stl-file with mounting holes for extra power supply…
Remix of sonderjul design with M3 heat set inserts - M3x5x3 for parts cooling fan screw, M3x5x4(5) for MINDA holder. The idea of using short heat set insert for part cooling fan was to make clean look x-carriage same as in my original…
Remix of the original part with plain face surface and M3 heat set inserts instead of hex nuts. Fasteners: M3x5x3 heat set inserts - 3 pcs M3x5 BHCS - 3 pcs(Instead of stock M3x6 BHCS marked with green arrows) .step and .stl - files are…
Ender 3 x limit switch cover for direct drive conversion with cables path avoiding cross the frame. Fasteners: M3x25 FHCS - 2 pcs M3x40 FHCS - 2 pcs (used with stock cover) .3mf, step and .stl - files are available in attachments.
Alternative PSU for Filament Spool Switcher & Winder with Mean Well LRS-12-50 Hardware: Mean Well LRS-12-50 power block or alternative with the same dimentions KLS1-AS-303-1 IEC AC INLET With Fuse Rocker Switch Fasteners: M5x18 BHCS -…
Knob for Moulinex QA150110 to replace original one. Grey insert glued to knob or you may use original. .step and .stl - files are available in attachments.
This is the original design of enclosure for CabZone LE The following is needed for assembly: Heat set inserts M2.5xD3.5xL4 - 2pcs M2.5x10 screw - 2pcs I printed this model by Bestfilament PETG. Some enclosures marked on laser engraver -…
VERTEX3D MMU2S+ Idler body with M3 heat set inserts and clean look side walls. Fasteners: heat set inserts M3x5x4 - 2pcs
Add cutout for charging cable.
This bottom can reduse the weight of your pedalboard. I printed this model by Bestfilament PETG and then marked on laser engraver. The files for engraving in attachment.
Thick Y end cap for LSR-350 PSU case to make plain surface. Both stl-files for v-slot and non v-slot aluminium extrusions.
This is a remix of the Filament width sensor (hall sensors) designed by Janar_102020 with M2.5 heat set inserts to fasten cover, M3 heat set inserts for bearings and push-fit collet cutout to reduse width(30mm with push-fit collets…
This is a compilation of two awesome designs - V0.1 Skirt Inlet by 3vilson and Bigfoot - Voron V0.1 bigger rubber feet by Pix . Fasteners: Heat set inserts M3×5×3 - 2 pcs M3x12 BHCS - 2 pcs .step and .stl - files are available in…
Replacement handle part from SteveO's Techno Pad Kit adaptated for 3D printing. UPD 17.11.2025: add rev2 files with cutout on the side surfaces like on original part.
Replacement part for a genuine one. Used Prusament PC blend Carbon Fiber to print this part.
These are all currently available results.
