Counting matching models…
Rack is designed to make on-ice work easier thanks to improved stability and protection of tube contents. Spikes will hold on well-packed ice itself, or can be pushed into bottom of styrofoam box. Model can be easily remixed for other…
For vixen-style finfer base. This version requires 6x M3 nut, 1x M4 nut, 6x short M3 screw with hex head and short M4 screw with hex head. Knobs can be placed using heat and some epoxy, same applies for nuts. I recommend printing with at…
Printable cheshire style collimator. Print using PETG/PLA or other material with neglible warping. Dimensional accuracy and shape are critical. Print using 0.25mm (maybe 0.4 mm will be also ok) for best accuracy. This take time but we…
fiberboard expandable dowel for hinges. Makes thru-hole connection with cap on the other side of board. print with PETG/PCTG at 100% infill
Print with lot of infill, use only PETG/PCTG, so it will not warp excessively. Tested up to 1000g. Nice for cell pelleting.
Stand for cryo vials ~5mm diameter with 6 bottom slots. Holds bottom so you can screw them with one hand.
Coffin shaped box (~22cm length), designed to use 4x6 and 5x2 mm magnets glued into top and bottom for better closing, with fantasy-like decorations and orthodox cross. Print made with black PCTG filament and 0.4mm nozzle, 0.2mm layer.
Crude and efficient anti-skid shoe pads. Working example printed from 40D TPU, 4 walls, 1.2mm top and bottom shell, 20% infill, at 0.6mm nozzle. Printed part should be fitted with 25mm or 20mm wood screws and zip ties/anything else that…
Print with lot of infill, use only PETG/PCTG, so it will not warp excessively. Tested up to 1000g.
Cat shaped voronoi-styled lampshade, Insert for 60mm led. (insert external diamater is 69.5mm). Base model created with Makerlab Make My Lantern, corrected in MeshMixer and modified in Fusion360.
Realization created as follows. Outer part printed solid with purple PLA. Remelted in salt powder in approx. 180C internal temperature (it took about 2h to reach). Be careful with temperature, PLA easily burns. After this, can be cooled…
These are all currently available results.
