P
PrintablesM Reynolds
Darth Vader's TIE Fighter model (Remix)
Redesigned the wing components for better multicolor printing. The first designer did a fantastic job. Give him credit.
- Downloads
- 1,669
- Likes
- 617
- Rating
- 5
All models
Counting matching models…
P
PrintablesM Reynolds
Govee Permanent Outdoor LED Light (Pro) Mount (No supports)
This Govee Pro outdoor LED light (HERE) mount is friction fit around the top of the LED but remains loose around the bottom. This allows the mount to be placed over the strand (and not fall off) while attaching outside. The design is…
- Downloads
- 1,028
- Likes
- 60
- Rating
- 5
P
PrintablesM Reynolds
Mobile Phone Clamp GoPro Mount
No supports necessary. I wanted to use the phone clamp on a GoPro mount, so I remixed the design with the GoPro tabs on the bottom.
- Downloads
- 778
- Likes
- 114
- Rating
- 4.78
P
PrintablesM Reynolds
"Love" Heart Tea Light Display (Wedding, Anniversary, or Valentine's Day)
Extending the idea from others, add this tea light toppers to help celebrate a Wedding, Anniversary, or Valentine's Day. This fits any LED tea light under 40mm in diameter (HERE) . The prints have integrated supports that snap off easily…
- Downloads
- 593
- Likes
- 70
- Rating
- 5
P
PrintablesM Reynolds
Webbed Heart Tea Light Display (Wedding, Anniversary, or Valentine's Day)
Extending the idea from others, add this tea light toppers to help celebrate a Wedding, Anniversary, or Valentine's Day. This fits any LED tea light under 40mm in diameter. (HERE) . The prints have integrated supports that snap off easily…
- Downloads
- 419
- Likes
- 60
- Rating
- 5
P
PrintablesM Reynolds
Plastic Blade Bambu Scraper
This is a handle for plastic razor blades (HERE) used for scraping labels or other gunk. This fits easily over the X1C's door handle for easy storage and availability. The blades should just snap into the holder. Please don't use with…
- Downloads
- 409
- Likes
- 43
- Rating
- 5
P
PrintablesM Reynolds
Molle Flip-Down Phone Case Attachment (90 degree hinged)
This case attaches to Molle mounts on a vest. so that your phone can flip down for easy viewing. Prints in two parts and uses jeweler hinges for strength and reliability (versus a weaker printed hinge). The phone is secured by 1.2 mm…
- Downloads
- 226
- Likes
- 71
- Rating
- 0
P
PrintablesM Reynolds
Bullet, Crayon, or Cylinder Puzzle
This simple desktop puzzle can be printed in various colors or as a single unit. This may take some mental work to figure out how it works for the first time, but once you know how it goes together, you will frustrate your friends at how…
- Downloads
- 166
- Likes
- 47
- Rating
- 5
P
PrintablesM Reynolds
The Office - Dwight Schrute Gym for Muscles (Wall Art / Plaque)
Wall art for the Gym. Measures ~125mm x 140mm x 3mm (or 5.5" x 5"). The file allows easier multi-color printing so you can set the second color for the raised portions. This only makes for one filament color change (Less poop). The raised…
- Downloads
- 104
- Likes
- 27
- Rating
- 5
P
PrintablesM Reynolds
Govee Permanent LED Mounting Bracket (No supports needed)
Mounting bracket (30mm) LED that covers the front face and sides. Useful for matching the color of your house or soffits. Also redundant if the VCB tape fails. The printed part is a snug friction fit so attaching them before screwing them…
- Downloads
- 102
- Likes
- 8
- Rating
- 0
P
PrintablesM Reynolds
The Office - Dwight Schrute Gym for Muscles (Keychain)
Eat, Print, and Be Merry… I made the logo of the design raised. This was a complete redesign of the logo and i did not use the original creator's work here. I made it a 'remix' because it is a remix of the idea and so I thought I should…
- Downloads
- 92
- Likes
- 28
- Rating
- 0
P
PrintablesM Reynolds
Tiny Servo Driven FPV RC Tank - Tiny Trak
This tiny FPV Tank uses Lego tracks driven by servos. To build you need the following: Two Lego tracks (Lego Part: x939 or 43903 - www.bricklink.com for best prices) Two servos (continuous [FS90R] or modify regular) Receiver of your…
- Downloads
- 84
- Likes
- 44
- Rating
- 0
P
PrintablesM Reynolds
Craftsman Blower Reducer / Funnel
Craftsman blower reducer / funnel. The part reduces to an interior diameter of 1" (24.5mm) and outside diameter of 1.25" (32mm). It has a cutout to accommodate the ground tab on the blower. I used supports but you could try to print it in…
- Downloads
- 78
- Likes
- 20
- Rating
- 0
P
PrintablesM Reynolds
All Things Dwight... Bears, Beets, Battlestar Galactica (The Office)
A placard for all things Dwight Schrute. Bears… Beets… Battlestar Galactica… There are two designs - one with a hole for hanging and one without. I printed in Gold Silk PLA and Brown PLA. The colors are separated by layers for easy…
- Downloads
- 63
- Likes
- 23
- Rating
- 0
P
PrintablesM Reynolds
Tiny Turret Quad Track - Tiny Servo Driven FPV RC Tank - Tiny Trak
This tiny FPV Turret Quad Tank uses Lego tracks driven by servos. It turns via skid steer. The tracks can articulate 30 degrees up and down for going over obstacles. The camera turret is controlled by a servo connected to the yaw on the…
- Downloads
- 55
- Likes
- 33
- Rating
- 0
P
PrintablesM Reynolds
Vinyl Fence Rail Tie
(For 5” Vinyl Fence Post) Attach the rail tie inside the post after the rail has been installed to add strength and durability to the post and rail system. This will help prevent the rails from backing out in high winds. I attached with…
- Downloads
- 52
- Likes
- 5
- Rating
- 0
P
PrintablesM Reynolds
Beefy Liberty
Yeah... Lady Liberty works out. This is my original design. It is not reuploaded from another website; however, is was originally posted to Thingiverse: https://www.thingiverse.com/thing:219006
- Downloads
- 37
- Likes
- 5
- Rating
- 0
P
PrintablesM Reynolds
Model Rocket Ignition Box
This launch ignition box is for model rockets. It prints assembled and in place with no supports. For use with one 9v battery. The case has a freely moving switch cover to protect from accidental discharge. The case has a sliding panel to…
- Downloads
- 34
- Likes
- 6
- Rating
- 0
P
PrintablesM Reynolds
Flite Test Mini Arrow Power Pod
FT Mini Arrow Power Pod. This power pod is for 2204 2300kV motor for a fuselage modified to fit a 1500mah battery. This fits snug into the fuselage allowing a good friction fit. I also found it weighed 2g LESS than the original foam pod.…
- Downloads
- 30
- Likes
- 1
- Rating
- 0
P
PrintablesM Reynolds
Dodge Blower Motor Connector - S2041
The blower motor connector broke on my Dodge Ram 1500. The replacement connector (a piece of plastic) runs about $50! (See link below) Now it's only 3 cents. All you need are two blade connectors and this printed model. Actual part:…
- Downloads
- 24
- Likes
- 1
- Rating
- 0
P
PrintablesM Reynolds
Teledyne FLIR Siras Drone Prop Protector
This protects the props for a Teledyne Siras UAV when putting in the case or other storage means. Two models for printing if your printer requires a brim. Just cut the integrated brim away after printing. These print pre-tensioned and…
- Downloads
- 22
- Likes
- 0
- Rating
- 0
P
PrintablesM Reynolds
Flite Test Goblin Motor Mount for better airflow
lite Test Goblin motor mount for increased airflow over the motor. This power pod is for 22xx 2300kV'ish or similar quad motor. This fits snug into the fuselage allowing a good friction fit. I was having issues with the original mount in…
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
PrintablesM Reynolds
Flite Test Super Bee Nacelles
FT Super Bee Nacelles. I was tired of having to cut out more foam for power pods after a crash. Using these, I have no issues except for the occasional bent prop. This printed fine without supports. Just remove the integrated support…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesM Reynolds
Alternative Pip Dice (Lines)
Alternative Pip Dice for various gaming uses. The lines flow from face to face with each having the appropriate number of segments per side. Can be multi-material / color printed. No supports necessary. See my other design with wavy pips…
- Downloads
- 18
- Likes
- 11
- Rating
- 0
P
PrintablesM Reynolds
Alternative Pip Dice - (Wavy)
Alternative Pip Dice for various gaming uses. The lines flow from face to face with each having the appropriate number of segments per side. Can be multi-material / color printed. No supports necessary. See my other design with line pips…
- Downloads
- 16
- Likes
- 6
- Rating
- 0
P
PrintablesM Reynolds
FT Super Bee (*Speed Build Kit*) camera mount for RunCam Swift, HS1177 or similar
FT Super Bee (Speed Build Kit Edit) camera mount for RunCam Swift, HS1177 or similar style camera. This provides the extra clearance to account for the double layer foam board AND the plywood doubler in the speed build kit for the FT…
- Downloads
- 15
- Likes
- 4
- Rating
- 0
P
PrintablesM Reynolds
File Cabinet Bracket for Bambu Parts Box
Instead of wasting filament printing a box to hold the spare parts that came with the X1C, why not just repurpose the interior packaging from the box that came with the printer. I printed 4 brackets to cradle the parts holder.
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesM Reynolds
Govee Pro LED Installation Spacer
Select the appropriate offset from the side of your house to the center of the LED. Print the size and end cover and glue them together. this will allow you to set the spacing and hold the mount ( this one ) while installing (I used…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesM Reynolds
Skydio R10Battery Molle Mount
Skydio R10 drone battery Molle mount to attach spare batteries to a tactical vest or pack. The battery uses its own attachment spring clips similar to how it attached to the UAV. Simple print with no supports. Use six Wall Loop /…
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesM Reynolds
Skydio R10 Spare Battery Mount (Screw Holes) for vehicle
Skydio R10 spare drone battery mount for securing in a vehicle, trunk locker, or other hard mounting point. Uses. two 0.75 inch #8 screws (Holes are 4mm in diameter and countersunk) No supports needed and print with six wall loops /…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesM Reynolds
Skydio R10 Drone / Battery Tray
Skydio R10 drone tray for transporting the UAV and battery in a vehicle. This tray can be secured to a hard surface or attached using velcro. This tray is not meant to secure the drone for bumpy, overland travel. this is meant as a…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesM Reynolds
Skydio R10 Battery Molle Mount (BladeTech)
Skydio R10 drone battery Molle mount using the BladeTech system to attach spare batteries to a tactical vest or pack. The battery uses its own attachment spring clips similar to how it attached to the UAV. Simple print with no supports.…
- Downloads
- 2
- Likes
- 1
- Rating
- 0
These are all currently available results.