Counting matching models…
HG gundam base. I use these for my kits because its cheaper and less noticeable than the one's you can buy. I made the top 3mm pin slightly drafted. If you need a tighter fit or it to go in further use your nippers and clip a tiny bit off…
Jurassic Park Raptor Cage at 1/18 scale.
Stubby grip based on the worker angled grip. use 30mm M4 bolt and two nuts. should work with any picatinny rail.
here is my jeep wrangler body for a trx4m. i print the main body and glue the details on how ever you want. it comes with the bumpers it needs to be put on a trx4m. it wont work on the normal bumpers. be sure to support the main body well…
I use a 20 mm M3 bolt to hold the rear sight in place. Mount on the picatinny with M4 30mm.
Prints Per track (4 total): 8x small_wheel 2x large wheel 8x skate 1x inner_rail 1x outer_rail 3x stand_off 1x gear 1x removable_bearing_interface 1x outer_retainer 1x of the following depending on position inner_retainer_rear L…
This one is designed for the bronco/defender style chassis. I will update later with the option to use it on a high trail later on. Assembly for the base frame is coded with colors: Yellow = M2.5 x 15mm, total 4 pieces Green = M2 x 8mm,…
SD gundam base. I use these for my kits because its cheaper and less noticeable than the one's you can buy. I made the top 3mm pin slightly drafted. If you need a tighter fit or it to go in further use your nippers and clip a tiny bit off…
use 8mm m2 socket screws in place of the original m2 6mm screws
you can use 40mm m3 for both latch pieces and the two hinges if you like. I just glue the bumpers on with super glue. Note the bumpers are not identical. they have cut outs in the back where the hinge is so print one of everything.…
I have added an hg scaled model. It fits well with the Hg Fake Nu + Core Gundam.
its a Jurassic World style fence. i used bamboo skewers for the horizontal poles but i included a model with the correct
i used a m3 heat insert into the fake adjustment wheel to tighten the rear sight. source https://cults3d.com/en/3d-model/tool/ar15-m4-m16-a1-detachable-handle
cosmetic magwell. based on the one from out of darts.
This is a mask that needs to be scaled requested by a fellow redditor Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Costume
Adapts from the backplate on the saturn 2 to 4in Duct.
Small low profile print to add an orange flash hider to your 16mm barrels.
Hi guys, This is my airbrush stations clamp lamp arm thingy. use M3 bolts and nuts on everything and it will work. Preferably print in petg its stronger than pla. Category: Electronics
More heavy duty foldable tripod I use with 5/8in dowel to hold 3d prints i am painting or finished helmets. I use 3 6mm m3 insert nuts from: Hilitchi 250-Pcs M2 / M3 /M4 Female Thread Brass Knurled Threaded Insert Embedment Nuts…
theres a +20, +30, +40 fps spacer
mounts on a picatinny rail. you will need to glue / melt the jaw to the skull. i used a 3d pen and a soldering iron.
Really this is a way to add a better or longer barrel 16mm od to your nexus pro. in addition you can put silly nstrike attachments to it.
Its the paddock sign from the first movie. i left the text and image off to allow customization. i recommend printing sticker labels to populate the circular image location and the dinosaur name text.
Trx4m car Lift. Use 25mm m3 bolts and nuts to secure it,
Turn the hammershot into a 8 shot instead of a 5. use 17/32 brass tubes for the insert
This is a light foldable tripod i use on the end of a 5/8in dowel to hold prints while painting or helmets. I use 3 6mm m3 insert nuts from: Hilitchi 250-Pcs M2 / M3 /M4 Female Thread Brass Knurled Threaded Insert Embedment Nuts…
replace the flexy insert piece to attach you nerf accessories to your pic rail.
This is my own design for mounting an fpv camera to the traxxas slash. The hole pattern fits Integy RC Model T8026 Steel Roll Cage Body for Traxxas 1/10 Slash 2WD. Though you can also mount it to the shell by drilling 4 holes. Also here…
LC80 Body Mount for TRX-4M Bronco / Defender Compatible with: TRX-4M Bronco / Defender Tested with: Injora Universal LCG Frame (no K10 extenders) Disclosure no AI was used to make the model or design, but I used chat gpt to format my…
Battery: MakerFocus 4pcs 3.7V Lithium Rechargeable Battery JST1.25 Connector 2pin, 952540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board https://a.co/d/hbp3xvP Camera:…
clamps on to give you an adjustable mount for your fpv screen
Lets you install a longer 16mm aluminum barrel. still lets you attach the faux barrel.
These are all currently available results.
