Counting matching models…
Hang your wine glasses! You need one side part on the left and one on the right side. Add as many middle parts as you like for more storage space: 2x side 2x side + 1 center 2x side + 2 center … The depth is chosen in a way that allows…
I used countersunk 3x16 Spax screws, but similar sizes should work well, too. Check your light strip version, this one has 14mm width!
Simple box for keeping handkerchiefs at hand (about 2 full packages).
Please see here for an updated Version V2 with a snap-on-cover. Since my son started learning Latin recently, learning vocabulary with paper cards still seems a helpful aid, even in the digital age. DIN A8 seemed like proper size for…
Since the Ikea Exceptionell drawer has not a rectangle-sized storage area, I designed these boxes to make best use of the available drawer volume. An Exceptionell (Maximera?) 60x37 cm, middle height drawer can exactly fit 2 of these on…
This is Version 2, an update to https://www.printables.com/model/599547-index-card-box-din-a8-with-flexible-separators, which adds a snap-on lid to protect the cards while transporting them. For easier closing the lid, the big separators…
Since the movable part of the mount coming with the Abus Bordo 6000K/120 SH tended to fall off rather often, I decided to construct a 3d-printable replacement, while I still was able to take measures on the original. I found printing it…
I used simple double-sided tape to attach to the wall.
Snap in (and out again) your OWC Thunderbolt 4 Dock (OWCTB4DOCK). The mount can be fixed either with screws or with adhesive strips. The space inside is dimensioned for the feet of the dock to point inside the mount, i.e. having the dock…
Skadis Holder for Anker Prime Charger (200W, 6 Ports, GaN). Uses two universal pegs from here for mounting on the skadis plate: https://www.printables.com/model/635620-skadis-skadis-universal-peg/remixes
These are the enclosures I designed for the DIY-Sensor for a Ferraris wheel power counter with an Amica NodeMCU ESP8266. You can read details on the setup and build and get the software at…
Pocket money for kids, tips for pizza delivery, and no coins around... These tubes are for 1/2 EUR coins side by side. There is one version for about 50 coins (as depicted) and another version for about 25. Needs minimal supports (only…
I used 3x16 Spax countersunk screws to mount it to wood. Similar sizes should fit well, too.
We all loved the sheep shaped toilet paper by @hiob, but were not able to drill holes in the wall for a mount. So I quickly designed this little green grassland as a stand for it. Just use the regular print and drop it on the mount…
The original wall mount for my SG-Zauberstab broke, so I decided to draw a new one. Since the side add-on for keeping the blades was utterly useless, I decided to omit that part and have just the small mounting point for the Zauberstab…
Holder for an Anker Powerport | PD on an Ikea Skadis. Category: Tool Holders & Boxes
Not pretty, but good enough to keep a GluePen at hand on an Ikea Skadis rack without dripping hot glue. You should print the small mount wedge standing vertical on the print plate with some supports (not much required for this little…
This is a mount for my favorite 0.5 liter drinking glasses (search for “Bierseidel Minden” for an idea) to the Ikea Malm Bed Side. Works well for coffee mugs, too :-) One Version has a small support to ensure the side is growing straight…
The Mini Chopper/Mill AT320 for the Kenwood Chef is a nice tool, however the kitchen's entropy makes its parts fly around and disperse into all different cupboard stores. This tray is to keep all parts together in a tidy way. Category:…
I've had enough of those little (fake- ;-) ) baking aromas flying around, also those mini-packages of baking soda and the like... Print Settings Printer Brand: Prusa Printer: I3 MK3S+ Rafts: No Supports: No Resolution: .20 Infill: 15%…
Usually, I needed my Withings BPM connect or my Withings Thermo I was lying in bed and was too lazy to get up ;-) So, I designed this mount for a bed or wall (I simply used power strips to attach). Since there was still room in it, I also…
This is a simple case for an OpenDTU or AhoyDTU unit consisting of a ESP32 and an NRF24L01+ module. Both were mounted on 55mm x 55mm board I got from eBay to save me all the cabling. There are vents on the front side for some air…
When the handle of our water tap (mixer tap) broke away from inner rust, it was -- you guess it -- the evening before 4 consecutive bank holidays with shops closed :-(. To still be able to use water during those days, I quickly draw this…
Best print upside down with supports. The surface covered by the supports will be hidden completely by the echo itself.
Add some hue light strips below an Ikea SMÅSTAD Bed without ruining your wood with drilling or gluing. For an installation with the desk on the side and a 2m +1m Hue light strip I printed 5 pieces of each.
ESP32 devboard enclosure, big enough to keep the pins attached and use Dupont connectors to the ESP. The enclosure is designed for an ESP-32 Dev Kit C V4 like this one, but should also work with other boards of the same size, as the board…
Sorry, no pictures, as I've already attached it on the backside of a fixed board... I've had enough of cables and chargers everywhere, so I got a Satechi Type-C 75W USB-C PD Fast Charge, Quick Charge 3.0 and constructed an attachment for…
Remote control holder for De'Longhi Pinguino PAC N82 Eco Silent. I just just Power Strips to attach it to a wooden wall. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Category: Organization
Gridfinity box for DIN A7 index cards, stackable, 3 compartments (2x3x12)
This little clip can be pushed on an OBO T60 case to hang it to a wire (or in my case a reinforcement lattice). In my case, I used it for hanging my luftdaten.info sensor with the (…
This gridfinity 3x2x12 container is fully stackable and stores 2 MiniVac (0,12 L) cans.
This gridfinity 3x2x12 container is fully stackable and stores 4 VitaVac (0,06 L) cans.
Sometimes have trouble with proper drainage down the hose, resulting in water flowing *below* the machine, which is hardly noticeable. To leverage that problem, until the drainage is fixed properly, this tray can pe put below the machine,…
A corner mount for the ELP infrared USB web cam . Perfectly suited for getting mounted inside of an Ikea Lack enclosure to monitor print success with an Octopi. No screws or glue required (aside for fixing the mount to the Lack leg). The…
These are all currently available results.
