Counting matching models…
This is a remix of DaVinci2000's Crocodile bag clip https://www.printables.com/model/243848-crocodile-bag-clip If you like this model, please give a like to the original. I did not create this. I only added a face. It works very well. I…
I have seen a lot of print in place hinges but the ones I have tried have not been optimized for 3D printing. That's not to say there are not any out there, I just haven't found any myself. If you look at the cutaways for this, you will…
I found this model on GrabCAD by "Yash Wani". It's an awesome model but not at all 3D printable. I thought I could make it 3D printable with a little effort. I was wrong. It turned out to be a monumental effort! Making parts thick enough…
My daughter designed these for Halloween and I modeled and printed them.
This is a remix of https://www.thingiverse.com/thing:1734129 by derailed. This is an excellent idea but I had a couple of issues. If you have not seen derailed's original, you should go there first and read his summary for a full…
I found this model on GrabCAD by Joshua VanName. https://grabcad.com/library/the-lamborghini-terzo-millennio-concept-car-1 It's an awesome model but not at all 3D printable. It took a long time to make it 3D printable, but I finally…
This is an ethernet dummy plug to reserve or protect a network port. It is designed to be printed on its side for strength of the clip. I included a plain version and one with a clip protector. I also included a version with and without a…
This is a fan duct replacement for the Bear Extruder 0.7.0-beta MK2.5S MK3S https://www.thingiverse.com/thing:3716110 With blower fans (in this case the part cooling fan), the majority of the air flow goes to the left side (looking at the…
This is a remix of https://www.printables.com/model/176417-phone-holder-smooth-tilt-adjustment-prints-in-plac I solved the problem of it not staying in place by adding a locking mechanism. You pull the adjustment knob out to adjust it and…
Remix of FreddyZ's awesome Kar98k bolt action ballpoint pen The original design is done very well and the parts fit together very well. Also an excellent idea! The reason for this remix is mainly for strength. The parts are printed laying…
This has direction indicators for if the direction changes so you don't forget. The small arrow goes on the side with the lip. Make sure the arrows are facing opposite directions. The reason for the larger arrow is so that gravity keeps…
I searched for a spool holder that was fully 3D printable and low friction and couldn't find what I wanted. So I designed my own. This one presses together, so no glue is necessary. This is for a standard 1 KG spool (20 CM diameter x 6.5…
If he gets out of hand, print this >> https://www.prusaprinters.org/prints/2687-spider-splatter I made a new version that fixes the problem with the joints wearing out quickly. I redesigned the sockets so they are more flexible and should…
I'm calling this a remix from https://www.thingiverse.com/thing:2303214 even though I redesigned this from scratch. I like the design but wanted to make some changes. I used "The Warthog" as a guideline for measurements, etc. I found that…
This is a one piece flexible tri-fold wallet. It has slots for 9 cards and can hold bills (cash). The TPU filament I used in the pictures is very old and not dry, so the print quality was very bad. I knew it would be, but wanted to test…
I found this model on GrabCAD. https://grabcad.com/library/chevrolet-corvette-c7-stingray-14-1 It's an awesome model but not 3D printable. !!! Please read the ENTIRE print instructions before attempting to print this !!! Instructions are…
Updated to version 2.2 Mostly cosmetic changes, but also made the supports much easier to remove. This is a universal phone stand that is adjustable in height and angle. My daughter wanted a phone stand that could stand straight up at…
This is a remix of ChaosCoreTech's awesome model, optimized for FDM printers. I separated the parts so they can be printed on an FDM printer. I also resized it to twice the size. I printed each part in a different color and then glued…
This is a remix of ChaosCoreTech's awesome model, optimized for FDM printers. I separated the parts so they can be printed on an FDM printer. I also resized it to 1.4 times the size. I printed each part in a different color and then glued…
Thanks Prusa for this awesome model! https://www.prusaprinters.org/prints/67178-original-prusa-i3-mk3s-gift-card I wanted to be able to print the parts in different colors and make it much larger. So I scaled it up a lot and cut the parts…
This is a remix of ChaosCoreTech's awesome model, optimized for FDM printers. I separated the parts so they can be printed on an FDM printer. I also resized it to 1.4 times the size. I printed each part in a different color and then glued…
I needed some clamps to hold parts together while the glue dried. I had problems with other clamps that had flat ends because they would slide off of parts that were not flat and/or had a texture. Also the threaded parts were not strong…
Can holder for 12 oz. (355mL) cans. Prusa Slicer is perfect for adding your own text or graphics (svg). I included a plain one for customizing and one that I added an svg as an example. There is also a plain lid for customizing and one…
This is a holder for the Logitech G13 Gaming Keypad to set it on your lap (your leg, specifically). I was having problems with my elbow and this alleviates a lot of the pain. It was either this or stop gaming. I made the lip separate and…
The name says it all! Printed with ABS and chemically welded with acetone. Fully tested on Wolf Spider https://www.prusaprinters.org/prints/2689-wolf-spider File names tell you how many of each part to print. This is 17.5" long (44.4 cm).
I made this version for people who don't have an MMU but want to do multi-color without having to paint it. I used emmett's OpenSCAD file to create the planetary gears >> https://www.thingiverse.com/thing:53451 It uses 3 8mm(D)x3mm(H)…
These are all currently available results.
