Counting matching models…
Same mask as original creator just easier to print. I figured I would upload these changes after struggling to print the teeth. I am sure I am not the only one. Split the teeth model into two pieces. Original had teeth floating in…
combined some model to make a Pikachu planter for a friend. make sure to drill some holes in the bottom of the planter for water drainage. Make sure to re-size the planter plate and feet to fit the model - i did not do this
dual 120mm fan fume extractor with carbon filter insert. needs supports under the exit duct.
There were some gummy bear candle molds already out there, but they weren't very good and way too small so I made my own. This one has the hole in the correct position, orientates the model the right way for pouring, and has a small…
A leatherworking burnishing tool that attaches to a drill. *You will need an M.3 or M.4 brass inserts (whichever works, I used M.4), a corresponding headless bolt, and a lock nut of the same size. * To assemble: 1. Use heat to press a…
Bar Soap Mold A simple soap mold design for pouring and curing soap bars. Two piece soap bar mold; 1 soft TPU rubber inner mold and 1 hard support outer box. Soft mold goes inside the hard outer box during pouring and curing. After…
I downloaded the Ender 3 Y-Axis mounts from another user but they were actually for the original Ender 3. The left rail fit fine but the right rail needed to be modified slightly to fit the bed and trigger the end stop. See photos for…
A remix of Broom Handle Bracket/ Broomstick Mount to accommodate 23mm width broom sticks.
Tealight Mold A simple tealight mold that casts x25 tealights. A soft mold to help keep shape while curing. The tealights are approximately 38 mm (1.5 in) in diameter by 16 mm (0.63 in) high. Print the mold in TPU rubber. Printed on an…
same big drawer model just with hex bottom for less material usag
EDIT Dec 23rd 2024: A user commented some difficulties with the model so I re-worked it to be more simple. I also uploaded a taller version. Couldn't find a good working one on printables so decided to make my own. It gets screwed into a…
This is an insert for a ULEPHONE Armor 24 cell phone. I plan on wrapping it with leather and making a shoulder strap to be carried around and double as a body cam holster. When the case is finished I will update this. Made the entire…
A remixed model. A KitchenAid mixer attachment hanger. Either screw it in or use double sided tape.
A simple stencil for spray painting ‘NO PARKING’ on a flat surface. I suggest using painters tape around the edges.
I modified the hinges for Gridfinity Storage Box by Pred to use headless m3x30 bolts instead of the ones with the head. This effectively in turn is easier to install and stronger as there is more plastic within the hinge.
Same model as original author minus the area for hygrometer. Maximum diameter for the silica gel is 0.55mm. The original design had 1.5mm holes. Make sure to set your wall generator to Arachne
I bought the WAHL clipper set from Costco. It's a very nice clipper but the storage box it comes in just throws everything around and is severely lacking. I have to constantly sort through it to find what I need. So, I made this model to…
A simple rotating filament sensor mount for the Ender 3 or Ender 3 Pro. Comes with two parts. One that mounts the bearing to the top bar of the printer and the other that acts as a case and connects the sensor to the bearing. You will…
Just a simple pen holder for your XP pen Deco mini7. Had to re-work it a few times to get the fit right. Use a bit of hot glue to keep it secure. won't damage your device. EDIT: the model is working is intended. Enjoy! Category: Other
This is a replacement paint mixing cup for a Masterson wet palette. You don't need a Masterson wet palette to use this. If you need a small paint cup for mixing this will work. This has to be printed in vase mode otherwise it will be a…
This heavy duty gate latch is sure to be kick-proof from even the hardiest of Amazon drivers. That is why I made this. Amazon drivers kept kicking my fence gate even though there is a sign clearly directing them to go around to get to my…
i added some support to trigger to prevent breaking. 2 versions
These are magnetic spider habitat accessories. It includes small staircases and corner platforms for your spider(s) to hang out on. It attaches to the glass via magnets. Glue one magnet to the accessory, and just place another magnet on…
Handmade soap drying rack. Holds five soap bars. Printed in PLA+, 2 outer walls, 20% infill, 2 top/bottom layers, 0.3mm layer height with a 0.4mm nozzle.
Combined two models to make a TS35 screen panel for the Ender 3. V1.0 - Added some support at the joint to support the weight. v2.0 - Cleaned up protruding spots and added a 40mm fan vent hole. There is some minor artificating inside the…
This is just a simple cap for a Cerberus vape tank that will prevent debris from falling into when in your pocket or bag. Slides over the tank and fits as shown in picture. Heat up the connecting piece and form a curve so it stays better…
UPDATE : i tested the original holder and the bottle was flopping around a lot so I added a second hole for a strap near the top part. This was tested and it works flawlessly now. Great hold and no chance of bottle coming out even on…
Needed a scarf holder so I made one. Use one long screw and tap it into a stud. Holds more than one scarf.
These are all currently available results.
