Counting matching models…
Features : Shelves are made with grooves, avec drawers have a tongue, that let you to print a drawer of any height and place it anywhere into the shelf, Shelves are stackable horizontally and vertically for an easy scale up, you can…
This remix add a back plate to prevent the battery to slide on the wall/panel. Also reduce thickness of the mount to a more tight fit Category: Tool Holders & Boxes
Toolbox/casing for the Tetris Balance game, with or without colors The ‘balance’ have a reserved emplacement in the toolbox lid, it stays in place as it is a tight fit and 3 clips retains it. The tray that holds pieces is removable to…
See the entire collection : Ultimate T-Handle Hex Key set After a lot of work, here is my Ultimate T-Handle Hex Key set, designed in 9 common sizes (1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm) Print in place, no glue required,…
Made this remix for ¾" french cleat Added a single and a dual color version (MMU) Print upside down!
Just a simple wheel stopper Print instructions 0.3mm layer height (or more if your printer can) PETG, ABS or any outdoor resistant filament Fusion 360 file included
Y fitting for 4 inch dust collection system Print instructions Category: Parts Summary Y fitting for 4 inch dust collection system Print Settings Supports: No
This is a modular drawer for the Ultimate Drawer System There's only one (empty) drawer and individual compartments. It's great to take only one compartment instead of the entire drawer. Also, you can re-arrange your drawers easilly by…
Same set of drawers than the Ultimate Drawer System, but with labels into each compartments It's a work in progress because it's a huge job, I'll post when I can do some ;) Here is a Word document to make the labels :…
Inspired from Kreg True-FLEX™ Featherboards There are two versions, « TF_Featherboard_Easy_to_print.stl » is easier to print but need a little more material (~15%). « TF_Featherboard.stl » need less material, but is a little harder to…
Print, add a piece of waterproof double sided tape, enjoy!
4 slots remix of the original design
Easy to print captain america shield, no support, keyhole on the back for wall mounting There are a MMU version and several non MMU versions (200 to 400mm diameter) with 0.1mm clearance, just print and assemble.
Simple HDD case for storage/traveling, with a tongue to keep the HDD in place. Print both parts and glue them together
Need : - 2 carriage bolts, ¼-20 x 2 1/2", you have to grind a little bit the head to make it fit into the track channel - 2 ¼-20 nuts, pause the knobs print at 8.00mm and insert them
Wall mount for Ego Hedge Trimmer Category: Tool Holders & Boxes
I love that 3D Tetris balance game, however I was not 💯 satisfied with the dices I found, so I made one. I used the 5 traditionnal shapes (S, T, L, l and square), on the 6th face I put a ‘lucky’ case called ‘SKIP TURN’. I made 3 variants…
Center finder inspired form Woodpeckers MT Center Gauge I designed some gauge bars in metric and imperial sizes, ask if you want some other sizes : Imperial : 1/8, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16,…
Threaded version of the nozzle drawer, there are 3 versions : E3D V6 (should fit MK8 nozzles too as it's the same thread, not tested) E3D Volcano Creality CR-10S Pro (M6x0.75mm) With Simplify 3D, do « Mesh > Separate Connected Surfaces »…
See the entire collection : Ultimate T-Handle Hex Key set After a lot of work, here is my Ultimate T-Handle Hex Key set, designed in 9 common sizes (¹⁄₁₆, ⁵⁄₆₄, ³⁄₃₂, ¹⁄₈, ⁵⁄₃₂, ³⁄₁₆, ¹⁄₄, ⁵⁄₁₆ and ³⁄₈) Print in place, no glue required,…
Thanks for the original design, just added a 'french cleat system' Category: Organization
Printable clasps and clips to make more bracelet/necklace with the toy « Kumi Kreator » You'll find other Kumi Kreator stuff in this collection Print instructions PETG, 0.2mm layer height, no infill
See the entire collection : Ultimate T-Handle Hex Key set Stand made for the Ultimate T-Handle Hex Key Set, both Metric and SAE , just print the parts and secure with some drops of glue Designed in 2 sizes , for the all 9pcs set or just…
Case for a Raspberry Pi camera, with night vision, as this one : https://www.amazon.com/Kuman-Raspberry-Camera-Module-Supports/dp/B0759GYR51/ Fixation is a GoPro style mount. I used it with octoprint for remote streaming and timelapses.…
Thanks to original design, reworked for MMU Enjoy!
Remix from https://www.thingiverse.com/thing:4841242 Wall mount for the nozzle scaled at 101.5% (the orginal design is too small) Category: Tool Holders & Boxes
Holder to carry 2 or 4 batteries Add supports for the top of the handle Made to feet mk4 height (220mm), you can cut 10mm at the bottom to fit on mk3
Painted with PrusaSlicer, It tooks 11 colours because of the ‘stones’ on the glove, so you have some manual filament swap to do : 50,00mm, Extruder (5), Black to Yellow 55,20mm, Extruder (4), Gray to Red 55,60mm, Extruder (5), Yellow to…
Original design of the body has a small default, and have 2 open bridges, just fixed it. Thanks to the original design!
Simple drywall grommets for cable management, there are a closed, open and 2 cables (8mm) version. It fit in a 2in hole. Designed for 1/2 drywall Enjoy!
Some improvements : MMU version for the ‘coinface’ wich let you choose 3 colors for the body, inlay, and arrows Fixed ‘flap’, I was never able to mount the original one Easier to mount ‘coinface’, redesigned legs and clip for an easy mount
The original drum is big (~126 cm³ of candy capacity), I redesigned 3 smaller size : X-Small ~32 cm³ Small ~53 cm³ Medium ~73 cm³ Thanks to the orignal author of this dispenser!
Hi, here is a jig to make an MFT table top, using a piece of pegboard for accuracy. It's designed for 3/4 in holes and 4 in spacing. Material needed : 1 pegboard piece (I made the jig for home depot's pegboard with 9/32 holes) Plunge…
Thanks to the original design, I remixed the base and the ‘blank trim’ to accept a sliced peaches glass. All other parts are into the original design
I needed a front clip for my shelf, that let me loading by the top It includes a thread at the bottom to fit a PC-4 M10 PTFE Coupler Single and MM version (with numbers 1 to 5) Thanks to the creator of the spool holder, it's an amazing…
Hook to let you to hang custom things as wood panel. Simply screw at the back of the panel
This is a printable spool for the kumihimo bracelet/necklace creator « Kumi Kreator », in 3 parts. Just print and snap together. You can add some drop of glue to assemble it permanently. Look at the pictures to see how to assemble. For…
Need support for the hooks, thx to original design Category: Hobby
Inspired from Woodpeckers MTXL Center Gauge I designed some gauge bars in metric and imperial sizes, ask if you want some other sizes : Imperial : 5/8, 3/4, 1, 1-1/4, 1-1/2 inch Metric : 15, 20, 25, 30, 35, 40 mm You need : 2x Bottom.stl…
Tool port adapter for Rockler Dust Right 4" Quick Change Handle Rigid Part : Print with strong filament : PETG, ABS,... 3 walls, 0.3mm layer height Flexible Part : TPU/TPE, 15/20% infill, 4 walls for very flexible filament (ninjaflex), or…
T-Slot nuts for Incra rail, designed to use with 1-4-20 fasteners
I took the source code of Customizable fancy pencil holder and remix it to make a big one for 96, 99 or 102 pencils Category: Art Tools
Inspired from Woodpeckers MTXL Center Gauge See also the smaller version : MT Center Gauge I designed some gauge bars in metric and imperial sizes, ask if you want some other sizes : Imperial : 5/8, 3/4, 1, 1-1/4, 1-1/2 inch Metric : 15,…
3D Printing Canada Cardboard Spool Ring for Bambu Lab AMS
Case for the "Mille Bornes" Game Category: Games
It's a tool to adapt the tiny spools of the toy « Kumi Kreator », simply fix the hex side in a drill, put a spool on it (no hardware required) and refill your spools in seconds! You need to run reverse your drill to get the spools filled…
Hi, here is a jig to make an MFT table top, using a piece of pegboard for accuracy. It's designed for 3/4 in holes and 4 in spacing. Material needed : 1 pegboard piece (I made the jig for home depot's pegboard with 9/32 holes) Plunge…
T-Slot nuts for Incra rail, designed to use with 1-4-20 fasteners Category: Parts
A simple jig to cut batch of cords, to refill empty spools for the toy « Kumi Kreator » Cords length is around 21 in. (I tested with 20 in but sometime have too short cords to handle the full capacity of the machine) There are 2 types, I…
Simple drywall gromets for cable management, there are a closed, open and 2 cables (8mm) version. It fit in a 2in hole. Designed for 1/2 drywall Enjoy! Category: Household Supplies
Modified fixture to directly handle a Bosch PS31 drill, also added 2 screws to secure the drill Print 2x knobs, and the fixture Needs 2x M5x45 hex bolts, 2 M5 washers and 2 M5 nuts
I just pre-order a game for a friend's birthday, I wanted to give him something 'physical', so I made this fake bluray. Juste print in blue (translucent if you have), 10% infill. Google, print and glue the cover of the game ! Category:…
I just pre-order a game for a friend's birthday, I wanted to give him something 'physical', so I made this fake bluray. Juste print in blue (translucent if you have), 10% infill. Google, print and glue the cover of the game !
Remix to mount on a Dewalt DW618 plunge base, No bushing guide needed Better dust collection (bigger opening) Fixed to the router Replace the orignal router plate with this one (use original screws) I made two version as the pegboards are…
Simple protector to put in the rectangular hole (see picture), for BLTouch cable for example. Printed in TPU, didn't tried with solid material Category: 3D Printer Parts
Tool port adapter for Rockler Dust Right 4" Quick Change Handle Rigid Part : Print with strong filament : PETG, ABS,... 3 walls, 0.3mm layer height Flexible Part : TPU/TPE, 15/20% infill, 4 walls for very flexible filament (ninjaflex), or…
Threaded version of the nozzle drawer, there are 3 versions : E3D V6 (should fit MK8 nozzles too as it's the same thread, not tested) E3D Volcano Creality CR-10S Pro (M6x0.75mm) With Simplify 3D, do « Mesh > Separate Connected Surfaces »…
These are all currently available results.
