Counting matching models…
Remix of newman13f's model with a wider hole which fits stock 54mm portafilter of Sage/ Breville Bambino/ Bambino Plus. newman13f does not seem to have a printables account though.
I could not find a dosing funnel for my Breville Bambino Plus 54mm Portafilter (PF) which fits into the PF holder of my Smart Grinder Pro. The ones I have tried are too tall so I had to tilt the PF forward a little just so it goes through…
Great design by Skedmannen3D. Tweaked the slots a bit wider and deeper for my wrenches to fit. Used an M3 x 35 mushroom head screw PLA or PETG 30% infill 0.2 layer height No supports nor brims required. Category: Tool Holders & Boxes
Nose landing gear doors for Freewing Avanti S 80mm EDF. Haven't tried printed it yet. Would like to hear your print experience, successes, failures, slice & print set-ups, tweaks/ remixes, improvements, etc. Category: R/C Vehicles
Remix : https://www.thingiverse.com/thing:4351501 Remixed this as I needed a holder for my Logitech F710 gamepad with battery holder which can be mounted with screws under my shelf - it can also be mounted under a table. I added some foam…
I needed a work lamp so I can see and inspect my ongoing prints better upclose. Had an LED desk lamp lying around which is hardly used. So I decided put it to good use and not spend extra for a work lamp. I drew this work lamp shade in…
I could not find a protective cover for my Timemore Black Mirror coffee scale online so I made a simple one. PLA or PETG 0.2 layer height 0.4 nozzle no supports
The pad fits 58mm coffee distributors and tampers. PETG (preferred), PLA 0.4 nozzle 0.2 layer height 20% infill no supports
Cover for 53mm Coffee Distributor. I am using the distributor for my Sage/Breville Bambino Plus 54mm portafilter but also compatible with that of Breville 800 Barista Series. PETG or PLA (PETG preferred) 0.2 layer height 0.4 nozzle no…
The pad fits 53mm/54mm coffee distributors and tampers for my Sage/Breville Bambino Plus and Breville 800 Barista Series with 54mm portafilters. PETG (preferred), PLA 0.4 nozzle 0.2 layer height 20% infill no supports
Here's my version of the mask of Basilio from Netflix's TRESE animated series. I have only printed at 50% scale but the .stl is at 100% scale which can fit in my prusa mk3s bed (250x210x210mm). Bed orientation snapshots at 100% and 85%…
Reinforcements added to make the parts tougher. May need to enlarge the holes after printing. PETG and PLA+ are fine and durable. I just used supports in the area for the body post. Inspired by HumboldtEF's…
The plastic body of my 8 year old electric fan has become brittle and is cracking. We could not find replacement parts in our place or online so my wife wanted to throw it away. I felt its a waste to dispose it as all the other parts are…
I used PLA+ and PETG. 0.2 layer height 40% Infill Snaps in place (no screws or bolts needed). Suitable for Adult-sized scooters (100kg).
These are all currently available results.
