Counting matching models…
Print with 0.2 mm layer height. The strips are 0.6 mm thick. At this dimension also PLA is flexible but sturdy. The 9 cm strip requires only 50 cm of filament, the 21 cm strip 1 m. So they are perfect to use up small amounts of remaining…
You can label the tags by hand or use printed adhesive labels. If you are using a slicer that can generate text (e.g. Prusa slicer >= 2.6), you can generate the labelling quickly and easily during slicing. Printing conditions: PETG (PLA…
There is one group of organizers where USB chargers from Europe, US and Japan can be inserted. The other group is for cables only. In each group there are 3 different sizes (indicated ..s,.. m, ..l). Short or thin cables fit better into…
During operation of the botvac, dust accumulates in the filter and ultimately blocks the air flow. The filter is waste and must be replaced. Using the adapter and a hoover, the dust can be sucked out of the filter, thus extending its…
There are 2 sets of stl-files, one for machine screws (ms...stl) and one for wood screws or other things (ws...stl). Each set has 2 groups. One group with 8 mm between the 2 eylets for short screws, indicated with ...-s.stl and one group…
Use layer height 0.2 mm. The paint of a permanent marker can be easily removed by Isopropanol
When bolts are printed on an FDM printer, they should be orientated horizontally to achieve better stability against bending and torsional forces. This requires supports and leaves a burr on the thread when the support is removed. Due to…
These are all currently available results.
