Counting matching models…
This is my small fountain used inside the zen garden. I have included all the files needed to scale this model any way you need it. My print was completed using these settings. I would suggest printing infill at 100% for the thin areas.…
I made this adapter to fit GekoPrime's Spool Winder. It allows me to use rolls that have a 75mm opening and fit them to the spool winder accessory. The ones you see I printed were my first ones. Since then I did make them thinner to fit…
Here is my BMW car emblem. I made it where it looks raised slightly in the center. This model will have to be painted.
This is a deburring tool holder. I have went back and adjusted the hole sizes. I had a member state their blades would not fit. Hopefully now it will work for all.
This shelf was made due to the last one being somewhat flimsy. It now holds my accelerator and Bambu supplies on my storage wall.
This is my Honda car emblem. It can be used in many ways. I made it around 35mm but it can be sized any way you like. I have attached the Fusion360 files for your convenience. I printed this one using silk PLA.
This is a design I started myself after seeing something similar in China. I am not sure how well theirs work or how they are made. So, I decided to experiment with my design of a graphophone modeled in Fusion 360. This is still an…
After searching the web I found that sand sculpting tools do not seem to be popular. I did find some on Amazon but was going to take a week to arrive and cost over 20 dollars. So I made my own. It takes three hours to print on a Bambu. I…
This is a simple model that can be mounted onto the DeWalt router. I have included holes for 6 to 18" holes. The name should not be changed. I am offering this model for personal use only. The orange jig pictured here is the first one I…
I have included two Aston Martin emblems here. One is hollowed in the spaces while the other is filled in. The files below are defined as expected.
This is a fitting I made for the exhaust to go through the wall. It has three parts that I glued together after printing. This way I could adjust the elbow in the direction I wanted it to go. The grille on the inside is to keep larger…
This 3D-printed pink flamingo isn’t just a decorative piece—it’s designed to hold a roll of toilet paper, combining function and personality. The flamingo stands on a sturdy black base and was printed in separate pieces to allow for easy…
This was designed at a 1:75 scale for a miniature conference room we are designing. This table in real life will be 5x10
This is my rendition of the Volvo car emblem. It can be used as a keychain, necklace, or even decoration. I printed this one about 40mm and it turned out really nice. I used silk PLA for the material. The loop can be removed or made…
The base was designed to fit a 9 inch column. The flag holder holds a standard flag pole. It is designed to loosen and rotate at any angle. I suggest printing this with a high strength plastic. However, my beta test is PLA at 15% infill.…
This is Stay Puft. One of the scariest figures to ever make into the movies :) I designed this guy in Fusion 360. He is small so you will have to enlarge him to meet your needs. I was hoping to print him out already but the printers are…
Spool winder adapting bushing to fit inside skinny rolls so you can still use them in GekoPrime's design.
This is the Shelby GT emblem. I created it using Fusion 360 and printed it out in silk PLA. The smaller you reduce it you will lose some details. I printed mine about 75mm in diameter and painted the top layer black to see the cobra and…
I made this because my pressure washer only had so many holes for extra nozzles. This piece will plug right into the old nozzle holder but accept more nozzles. My printing was completed as follows: layer height = 0.2 bed heat = 50 nozzle…
This is my version of a light box made for holding 120mm x 90mm lithophanes. It was printed at .25 initial layer then .2 the remainder of the print. The frame was made to fit in one direction. You will see an alignment circle on the…
This is my paw template I use at the beach to add some designs around me. I originally had it hollow but found it better to make the hand area solid. Mine was printed in PLA with a 20% infill and 2 walls. Took about 1 hour to print two in…
This is my Tesla emblem. It can be used as a necklace, key chain, or any decoration. I printed using silk PLA and it came out nice. I did shrink it down small to see how well it would look and it looked great. This one is about 30mm.
This is a leash holder for my two German Shepherd dogs. It is personalized but I will drop some different filetypes so you can make some changes to yours. I printed mine at 100% and it took 4.5 hours on my Bambu. I printed the piece on…
This is my Mercedes car emblem. It can be used as a necklace, key chain, or any decoration. I printed using silk PLA and it came out nice. This one is about 30mm.
I nose this is nothing new but here is my 250 mm red Rudolph Nose. It comes with two hooks inside where it can be attached by bungee cords. My printer was set up as follows: .22 layer .25 initial layer 125% initial layer line width 6…
This is my Wile E Coyote slammed into the side of the MasterLiquid Atmos EVO Badge. I printed him using three PLA colors, .2 layer height, and normal supports for the bottom. I started with red. At layer 56 I changed to yellow. Then at…
Heartbeat fridge/wall art. I did drop some magnets in the back of mine to add it to the fridge. Ensure your polarity is correct. The size is about 4x6 inches and can be enlarged. This size fit my fridge nice.
Sheep face with TP holder. Tiziano had done a great job but there were just a couple tweaks I wanted for ease of hanging.
This is my Chicky helper for soldering. It is capable of holding a sponge, tip cleaner, and several tips for your gun. I have magnets that will be glued into various places on the model to help keep the piece straight. (See drawing for…
I started my model about ten days ago. Unfortunately, many others had the same idea. I hope everyone likes my setup. I have included all the files needed and even did a test print. I have drawn the clips on my models so it clips right…
Model was created to hold spherical pieces while painting. The edges are sharp where the piece would sit allowing very little contact while painting. I am printing mine upside down to see if no supports are sufficient.
This is my replacement chair foot. The legs of our chairs always get worn down. I printed these to be installed as replacements.
We had over 100 Mikrotiks to change power modules on (seen in the picture). The modules clip into the metal body with small depressable tabs. However, the design is not easy to get the module released. So we made this tool to aid in…
These are all currently available results.
