Counting matching models…
Duck with a knife. Ideally printed with an AMS/MMU printer unless you feel like painting I guess. Each colour is its separate mesh in the STL so for filament painting should be pretty easy using the fill tool should. The cover photo was…
Prints without supports (or brim if you sink the model down far enough). You'll need to sink the model down in the slicer settings a bit.
A print-in-place suspended betta. The cover photo was printed using 0.16mm layer height in Silk PLA. Files include a version with all the strings and a version with only the support strings so that nothing is blocking the betta. Also…
Prints without supports (although you will probably want to scale it up ~200% for an easier time printing). You might want to add a few negative volumes near the tip of the hands/teeth if the slicer decides that the part of the tip should…
Cover photo was printed using an Elegoo Neptune 3 Pro on 0.2 mm layer height and with the model resized to 8 cm in diameter. Make sure to check the layers when slicing to ensure that the strings are printed correctly.
Print the body with: Supports added for the tail 0% infill 0 top layers 5-6 walls/perimeters At least 1 mm of bottom layer (5 layers for 0.2 mm layer height, ~10 for 0.12 mm) I've included the eyes and mouth models from the original, but…
Refer to the .3mf Orca profile for print settings. Assembly Push the rod through the hinge attaching the body and the head. It should friction fit, but if its too loose try increasing the scaling a bit until it friction fits (or use glue,…
Everyone needs more legs uwu. Prints without supports, although you may want to slow down on the first few layers since the legs are a bit harder-ish to print due to curling.
Update 2023-10-18: Added robot_better_hands_and_neck.stl that improves the neck supports so that half the neck doesn't fall apart during printing. Only use it for large prints that are at least 200% scale. Description: The hand is now…
I didn't have any magnets for the original one so uwu
Prints with no supports. The cover photo was printed in 0.16 mm layer height with silk PLA.
An island that takes advantage of your printer's bridging abilities so that it can be printed without supports. The island can hold its own weight and a lot more, so you don't need to worry about it falling anytime soon uwu.
To adjust the wall thickness, open pot.blend in Blender and set the “Thickness” of the Solidify modifier applied to the “Chunky sitting pot” object. I use a boolean modifier with a cube to “open" the top of the solidified pot so you may…
Would recommend using supports for this, but it should be printable without supports as long as you print the overhang sections slowly.
Prints in place without supports. Fits around 25 films.
Prints with minimal supports only at the top lips of his mouth.
A string piece that can be printed in-place without supports. The recommended minimum height for the model is 90 mm if you do resize it (although it may work if you do resize it smaller as long as the strings are double-layered when you…
Instructions The body is easy to print, so print it with your usual speed settings and 2-3 walls. The lid will need to be printed slower (at least for the hinges) to allow for adequate cooling at each hinge, so print that at around 50mm/s…
A nether portal uwu? Prints with no supports.
For an easier time printing, sink the model down in your slicer so that the head isn't floating.
I mean, it's kind of stable-ish? Prints in two pieces without supports.
Platform held up by strings. Prints in place
Prints without supports I guess? The handle/leaf will need to be sunk down into the build plate a bit in the slicer (after flipping it 180 degrees).
Printing this will require a multi-material system. The easiest way to print this will be using Orca slicer with the 3mf file since the colours are already pre-assigned. Otherwise, download the stl and split by parts to manually colour…
Prints with no supports. Ideally, print with the smallest layer height your printer supports to capture the small details of the model.
Parts required straight_10cm: 34 straight_12cm: 4 for the short sides with the goal post straight_15cm: 2 for the long side goal_curve_1: 2 goal_curve_2: 2 bend: 4 Settings For the regular version (assuming 0.2 - 0.3mm layer height): 2 -…
These are all currently available results.
