All models

Bit and Blade Bridge

A tool for accurately setting router bit and saw blade height. Measures 2 to 20mm in 1mm increments.

Thread gauge collection

A variety of different metric thread gauges, as seen here:

Hold Down Stick

I recommend using 3 or more perimeters and 30% to 50% infill. The stick needs to have some spring to it, but also strength. Print it on its back with its feet in the air and supports under its head and tail. Use 3 adhesive rubber grip…

Thread Gauge 2

A gauge for identifying Metric and UNC threads. Print instructions Print at 0.15mm layer height (or finer) for accurate threads.

Easy print push stick

There are two models here. The first is my prototype which is usable straight off the print bed. The second (V2) has a taller heal to allow non slip rubber feet to be stuck to the underside to better grip the work piece. On a Prusa Mk3 or…

Tool trays

Several tool trays designed to fit in a ToolPro tool trolley.

GlueBot Cup

This Gluebot cup is a holder and carrier for the 16oz Gluebot and several glue brushes. It is designed so as things are very unlikely to come out while carrying. As shown in the video

Angle gauge for sharpening

This is an angle gauge with commonly used sharpening angles for chisels and planes. Printing the final layer in a different colour will make the gauge easier to read. See the video here: https://youtu.be/9Hs2RRfNoJw

Festool sander disk alignment tools

These applicators help you quickly align sanding disks perfectly with the holes in the base of the sander. These are designed for the Festool ETS-150 and both the delta and the disk pad for the Rotex 90. See the video here

Small Tactix tub

A small (54 x 54mm) tub for the Tactix fasteners storage case shown in the photos. Ideal for nuts, bolts, screws small nails and washers.

Tarp clip

This is a small plastic clip used to hold two tarps together, or a tarp to an awning. Ideal for extra shade when camping. See the video here https://youtu.be/DNe9TY7jKJg

Replacement Pushstick

I proved the need for a push stick by taking a slice out of the one that came with the saw (see last picture). This left the original push stick with reduced contact area with the timber and a sharp point on the end. As this is a solid…

Festool MFT3 Dog Fence

A fence for holding work in place on the Festool MFT3 table. See the video here https://youtu.be/DNe9TY7jKJg

Dril bit organisation trays

Trays for organising drill bits in a tool draw. See the video here https://youtu.be/gDVXiXtGzGM

Guide Bush adaptor base for Ryobi One+ trim router

It's a Guide Bush adaptor base for Ryobi One+ trim router. I recommend printing at 0.15mm layer height for accuracy and setting the perimeters to 4 for strength. See the video here; https://www.youtube.com/watch?v=pUN3ngCHsDw Print…

Tactix storage tray

A 108 x 53.5mm tray to fit a tactix storage organiser. See the video here, https://www.youtube.com/watch?v=lb78-fPxpl4

Jig clamps, glide rials, dovetail sliders and a handle.

In the video below I show you how to build a router table sled. This page contains all the plastic parts I used in the process.

Kreg Shelf Pin Jig Pin

An additional pin for aligning shelf pin holes. Used to maintain alignment when adding extra holes above the first column. See the video here:

Flush cutting base for Ryobi One+ trim router.

A trimming base for the ryobi cordless trim router. Used for flush cutting level with the surface. See the video here https://www.youtube.com/watch?v=YfQM_ieGrKo Print instructions Use at least 20% infill for rigidity.

Long Hold Down Stick

At 360mm in length this is 10mm longer than my previous Hold Down Stick. I have also updated the design with a flatter back to make it easier to print. The extra length allows the Hold Down Stick to bridge the gap at the side of a Mitre…

Mothers Day Plant Pot Sign

Two different plant pot signs for mothers day. One with a heart and one with a rectangle head.

Spanner draw organisation trays

See the video here:

Triton Router winder holder

A holder for the fine height winder of a Triton Router

Cotton Bud (Q-Tip) box with lid

The handle is screwed to the lid. This means all parts can be printed without supports.

Tool draw organisation bins.

Philips 7000 organiser

This is a tray designed to hold a Philips 7000 trimmer and its accessories. It has a 40mm gridfinity style base. I have included a range of compatible base grids for use with it.

Corner rounding guide

A jig for accurate and repeatable marking out of corners for rounding.

Chisel Racks for Narex and Marples chisels

One rack pair holds a set of three Marples chisels, the second rack pair holds a set of four Narex chisels. See the video here: https://youtu.be/ztdbiVzUNpE

Sock draw organisers

These make finding socks in the sock draw a lot easier and faster.

Speaker (or drink) holder for Daxys Bandicoot E Scooter

I wanted to listen to music while riding my scooter, but didn't want to block my ears to traffic noise with earphones. This is my solution. This holder screws to the handle bar stem, utilising the existing screws. There are slots for the…

Universal Digital Calliper holder, Gridfinity

A storage system that suits a wide range of digital callipers. Compatible with the Gridfinity storage system.

Heart shaped routing templates

Heart shaped routing templates to fit the routing frame I made previously. ( https://www.thingiverse.com/thing:3513531 ) PLA is fine to use if you only plan on using the templates a few times. If however, you plan on using a template…

Glue accessory stand for woodwork

Dust shroud for Incra Intelifence.

Driver bit tray

See the video here:

82mm Circular vent

I designed these to vent my router table vacuum cupboard. Just drill an 82mm hole in your surface with a hole saw, and pop these in. There are 3 screw holes if you want to fix them in place. See them installed here;…

Zero Clearance Insert for Carbatec Table Saw

There are two models here. V3 is slightly larger than V2 to account for a small amount of plastic shrinkage. V2 is the exact size. See it installed and tested here

Scooter Console Visor

This visor is designed to reduce the suns glare on the console, making it easier to read during the day. I recommend printing the visor in solid TPU.

Epoxy glue station

A storage solution for epoxy glue that includes places for mixing sticks and disposable mixing caps. (I recommend recycling the caps of milk or juice bottles for this.)

Incra T-Rule holder, Gridfinity.

A Gridfinity compatible storage tray for the Incra T-Rule.

Timber holding jig

A jig to hold your timber in place while planing, sanding, carving etc. Designed to fit in a ½' (12.7mm) 14 ° dovetail slot, like the ones used in the MicroJig Matchfit System. I recommend printing with 3 perimeters and a high infill rate…

Marking Gauge Mound

Planing Jig

A jig to hold your timber in place while planing. Designed to fit in a ½' (12.7mm) 14 ° dovetail slot, like the ones used in the MicroJig Matchfit System. I recommend printing with 3 perimeters and a high infill rate (40 to 60%) for…

Daxys Bandicoot e scooter indicator cover replacement.

This is a small enough model to be printed on almost any print. Use a fine layer height to reproduce the thread correctly (0.15mm or less). Use transparent yellow, orange or clear filament. The Bandicoot's indicator LEDs are already…

Large driver bit storage tray and divided under box.

These trays will print on medium and large printers. See it here…

MFT3 Dog Feet

These dog feet are designed to hold jigs in place on a bench with MFT3 style dog holes.See the video here: https://youtu.be/9Hs2RRfNoJw

Taller Tormek Feet

These feet raise the Tormek sharpening system up higher. Handy for keeping the machine out of its own puddle. See the video here: https://youtu.be/9Hs2RRfNoJw

Pfail carving chisel rack

A rack for holding a set of six, 200mm, Pfail carving chisels See the video here https://youtu.be/ztdbiVzUNpE

Incra T-Rule 150 Tray

Incra Protractor Protective Tray

Can be printed on small, medium and large printers. See it here …

Couch Coasters

I designed these Couch Coasters so I could slide my three seater couch on carpeted floor. This design is for couch feet with up to a 32mm diameter.

Labeled draw handles

Draw pulls or handles with labels on the front face to show the contents of the draw. I designed these for my router table, but I have included a blank one here. Print instructions Best printed with three outer layers to give the screws…

Incra Rules Gridfinity storage system

A tray for holding The Incra Ruler (30cm, 12"), Incra Precision Bend Rule and the Incra Centering Rule. Gridfinity compatible.

Draw glide

3d Printable glide rails for mounting draws in a cabinet or chest. Best printed in PETG.

Incra Protactor storage, Gridfinity

A storage tray for the Incra Protractor, comparable with the gridfinity storage system.

Veritas Low angle smoothing plane protective holder

This is a large model suited to large printers such as the Prusa XL. 280mm long See it here…

Number 4 Smoothing Plane protective holder

This model is 280mm long. Suitable for large printers such as the Prusa XL

Gridfinity storage tray for T260 ruler, level and multifunction bevel gauge

A Gridfinity storage tray for T260 ruler, level and multifunction bevel gauge. https://www.amazon.com.au/dp/B0CT93DC2C?ref=ppx_yo2ov_dt_b_fed_asin_title…

Centre scribe & Kerfmaker Gridfinity

A Gridfinity compatible storage tray for the Bridge City centre scribe and a Kerfmaker.

HNT Gorden Wooden smoothing plane storage tray

Veritas Scraping Plane protective holder

This tray is 280mm long. Suitable for large printers like the Prusa XL. See it here…

Veritas Bevel Setter storage tray, Gridfinity.

A storage tray for the Veritas Bevel Setting Gauge, compatible with the Gridfinity system.

Imperial Bit and Blade Bridges

Gauges for setting the height of router bits and saw blades (etc.) in 1/16 of an inch increments. Two gauges are included. The larger one has bold text, the slender one has engraved text. NOTE: Both models were created with the CAD…