Counting matching models…
Original photo taken from: https://knowyourmeme.com/memes/josh-hutcherson-whistle-edit I will upload my own print photos when I print it for myself, I will also share my print settings.
Parts List : PTFE tube (stretch the PTFE before hand) 1 M3 screw for ptfe approx 20mm (stretch the PTFE before hand) 2x m3 screw approx 10mm for attaching to the printer 3x m3 nut Tape IMPORTANT: The STL file is slightly modified for…
Print with Petg for added thermal resistance I have found that printing at 0.3mm layer height is optimal
I printed with PETG at variable layer height so that the top surface is smoother but printing time isn't too long Do the color change at about 3.14mm in Z
Some flags are the same with different colors so they are uploaded in the same files. Assembly for all the flags is identical the Pansexual flag is used as a showcase Put glue into the pentagon on the base and insert the stripe, depending…
Cutter Modified for Neptune 4 plus The changes inclue: Modified Arm to allow activation on the 4 Plus A guiding hole thing to stop the blade from shifting up which is an issue I faced Recommendations/Instructions: The body is prone to…
What is scarier than the founder of Prusa 0.3 layer height will probably work best 10% to 20% infill should be optimal needs supports for the 90 degree overhangs Needs an elastic ribbon to tie in the hole May need some foam to prevent…
Warning: I am unable to test the print on the actual case so I cannot ensure that no damage will come to the button or any other part. V1.1 slight modification to make the top clips work better V1.2 added 2 variations of the target, one…
To make your computer fancier than your enemies and friends. I haven’t printed it so that has to be left to your better judgement, however I am quite sure a standard 20% infill should work, for the top hat a lower infill like 5 or 8%…
Inspired by https://www.printables.com/model/668527-alexander-hamilton-musical-cover Print at 0.2 layer height and perform the color change at the beginning of the 1.8mm layer Lower speeds are typically better
These are all currently available results.
