Counting matching models…
Use this cap and a bit of 4mm PTFE tubing to turn any common PET pop bottle into a squeeze-to-squirt “lab bottle”. Prints without support in any rigid material. Either cut the washer out of an old inner tube, rubber sheet or print in…
Needed a hard case for playing cards that would protect cards from damage better than the cardboard box that cards are stored in. Prints with NO SUPPORT and the lid easily snaps on the box in PLA. Let me know if you try other materials.…
Designed a shop vac nozzle for my brother that has a slot shaped entrance. Fully parameterized for all the critical dimensions. I printed in PLA with 6 perimeters and an internal brim.
General Parametric CAD design for knobs can be used for any size hex nuts and bolts. Choose knobs suitable for epoxying onto a bolt or nut or a “captured” design where the bolt or nut holds the knob in place without adhesive. Extra…
This is a variation of my previous two piece ice scoop with traditional handle. I found that the traditional handle that sticks out the back is a problem in the deep ice compartments of countertop ice makers. This design completely solves…
Made this flexi elephant for a nice Thai lady who owns a restaurant I go to often. Print in any material, the joints are very forgiving. It's 8mm think, you can size it up to 10mm or 12mm with no problem. Based roughly on the outline of…
I needed to mount a Blink Mini camera to a window, the available models looked heavy and overdone so I whipped this one up in Fusion 360. I used a bit of double-back tape to attach to the window, holding so far. Tape on Amazon:…
My wife likes to make THICK sugar cookies so I thickened up the design, thinned the back plate, cleaned up the mesh that had some errors and added air holes. We were getting air trapped in the cutter on the original. I used ASA because I…
Stand for 10pcs Leather Hole Punch set Designed for manual color change label text. STEP and Fusion 3D CAD file included for remixing. I setup some parameters so you can adjust some of the dimensions there. My punches had the following…
I got tired of looking for the box of bandaids so I decided to build a “holder” to encourage people seeking bandaids to take only one instead of the whole box. I used double back tape to mount it on the inside of the cabinet door where…
Needed a quick gas cap for a small plastic replacement tank on a generator. I printed in ASA and used a rubber gasket. Print upside down, no support needed. UPDATE: v4 files use a 4mm wall thickness, my brother broke the first one…
I needed a container to hold my reading glasses at my desk, none of the models I found were what I was looking for so I whipped this up in Fusion 360. CAD model included and sizes are parametric so you can embiggen or shrinkify as needed.
By popular demand, not saying it was my daughter, I bring the bling. As usual, print with multicolor or manual color change just above the 1.8mm layer. Print bottom part in clear (works really well), black or white. Red suggested for the…
Various sizes to accommodate a wide range of round cable sizes along with a 12/2wG romex clamp. Made for #6 or M3.5 screws but anything close should work. I've included a Fusion 360 CAD file which is parameterized for both the round and…
Split up the original print-in-place to be a 4 part multi-color print that comes out much better and only requires a few drop of CA glue to assemble.
UPDATE: See my newer version that supports all three sizes in one device with a hinge. https://www.printables.com/model/1322380-super-deluxe-paracord-melting-whipping-form-melt-n Original version: This simple device allows you to melt the…
I designed this adaptor so I could transfer the last bit out of pump bottles into the next one. I hate throwing away the product that the pumps won't reach. This one fits most bottles that have a approximately 25 mm neck which is common…
I needed a wall mount and was surprised nothing workable existed. I thought about adding a cable pass-through but opted to keep it simple. I'm printing in PLA, any rigid material should work. I used 4 perimeters and concentric top and…
This model allows you to “whip” paracord using a flame to a fine point that will pass through nearly any hole where the paracord fits. It supports a variety of “550” paracord thicknesses from about 3.0mm to about 3.4mm. Handles all of the…
I collaborated with my daughter Paige who is a graphic art student at the university to create this MMU/AMS flexy zebra. It came out really good, better in person than the photos. Two colors, PLA. Any material will work. 8mm thick, can be…
Needed a corner bracket for a repair job that is a bit bigger and stronger than what I found available. I wanted offset holes to reduce splitting and a rib. Any rigged material will work, print on side with a touch of support for max…
A really simple and easy to print general purpose spool great for string or any pliable wire or string like materials. Prints with no support in two parts, flange-side down. I use PLA but any rigid material should work. The two parts…
I split the two contrast color rings so that you can use manual color changes for only 4 layers on each side. I'll attach my modified gcode along with 3mf and f3d. Note, 4 layers assumes 0.2mm layer height e.g. 0.8 mm. Attribution for CAD…
Flexi Rhino I created in PrusaSlicer using my flexi tool I printed in PLA with ironing turned on, any rigid material will work. Credits Silhouette SVG from: Vectors by Vecteezy - https://www.vecteezy.com/free-vector/animal-silhouette
Two piece, glue together, prints in any rigid material, I used PLA. Paint-on Support suggested only for the connector tab as show in image. I suggest 5 or 6 perimeters and 25% gyroid infill. If you open the Fusion 360 CAD file you can…
I wanted to mount my camera to the wooden table where I have my MK3S+ printer. This arm is about 3" offset (diagonally) and 4" up from the table surface. I printed with some supports so the arm wouldn't vibrate, fall or droop down.
I made a textured pot/vase (not vase mode) since everybody's doin' it. 2mm walls, vase mode is just too thin unless you have a crazy big nozzle. Ran into many scale/complexity issues with Fusion 360. Please post any makes. Note: It's…
My wife got some pantry shelf food organizers from the company named Shelf Reliance , they are a product in the FIFO Collection . They work great except for oddball can sizes so I made a design to print my own dowels. Print without…
After using many designs I decided to make a better mousetrap. I'm going for low filament usage and compact size. I used PLA and will print some in ASA for storage in the car. No support needed.
I used my bottle cap generator to create this cap for coffeemate creamer bottles. See: https://www.printables.com/model/633902-threaded-bottle-or-jar-cap-generator-for-fusion-36 I printed in ASA so I could put it in the dishwasher.…
Mount a blink mini camera to the front of your Prusa MK3S+ and MK4 with removable section using dovetail. If the Dovetail is too tight, use a bit of sandpaper and it will free up nicely. I used PLA, any rigid material should do. I hang my…
Instant party, after a couple hours of printing Print the two arms and one of the main parts, 3 perimeters with 10% infill works well, less might work. I've been using PLA because I have the colors I want but any should work. I use some…
The latest iteration of my egg storage solution for the fridge. These are designed to work in a pair on the side of the bottom shelf in our fridge. They perfectly fit back to front with no wasted space. The finger hole is designed to pull…
GO CHIEFS headband/tiara for the big game Sunday Made to print with manual color change at the 1.8mm layer, print bottom part in black, white or clear, upper part in Chiefs Red:
I created this try to help me stay organized and balance finding, putting away and space efficiency. Large, readable size labels allow wrenches to be stored on edge, you can tell at a glance when a wrench is missing. Generous finger slot…
Using my standard cookie cutter system, here are 4in, 4.5in and 5in sock cookie cutters. Print upside down, no support needed: Any rigid material will work, ABS and ASA will stand up to the dishwasher much better.
Universal Banana Scale - centimeter marks on one side and half inch on the other. International unity at last. Included G-Code allows for manual filament (color) change using M600 G-Code. CAD files included, Fusion 360 file is…
My Foldable Phone Stand with a Tesla Logo in the leg, see original model for CAD model and other info: I used ASA Prusament lipstick red with galaxy black and used faux MMU method to print 4 layers of logo color with manual color changes.
I kept losing the cheap plastic hub covers that are used on the stock chevy light truck wheels in this era (2007-2014?) Paying $20 for crappy third party replacements was getting old. I designed these replacements that sit further back…
Wanted to try the standard volume knob in Fusion 360 UPDATE: by popular demand I added a knob that goes to 11 UPDATE: added version with bolder numbers and using offset face instead of extrude for better scaling UPDATE: addev version (v5)…
Be the talk of the party this Super Bowl with these KC novelty glasses Can be printed monocolor but best done multicolor with 2 standout colors and clear or white for interconnects. The KC modifier look super great in Silk/Metallic Gold…
I created this highly customizable corner brace using the Fusion 360 “show dimensions” feature so you can directly edit the overall dimensions, just double click on the numbers in the DESIGN workspace and edit as need, no parameters…
Make a rack for my paint marker sets that can attach to a shelf. Bottom of each slot has an opening so you can fish out debris that falls in. Fusion 360 CAD file included for remixing. Model is well parameterized so you can change the…
My wife wields safety pins like a crusty old handyman used duct tape. I got her an assortment and made these boxes for Christmas, one for the home and one for the purse. The lid snaps shut so it shouldn't spill. You can load as parts or…
Hang Expand-It accessories when not in use, excellent original model by Jeff Used my soon to be famous Overhand Fillet gallery object. I printed in ASA, I guess it depends on how hot your shed/garage gets. See:…
My daughters are doing a booth at the high school for World Down Syndrome Day and asked for a “Rock UR Socks” headband so I created this model. It is multi color and multi-part, the crazy socks are glued on after printing. I used PLA, the…
I need a holder for my lighters so that have a home where I can find them, screw hole in the bottom for attaching to a shelf, block of wood or other surface. Fusion 360 CAD and step files included for remixing.
Novelty glasses with a scope reticle so you can take aim at your friends and love interests. Makes a great gift for your gun nut friends! Wear to parties and social gatherings. Assembly only requires a short length of filament t act a a…
I created this stand a long time ago, it works pretty well and I've had a ASA print of it in my back pocket every day for two years and it finally broke the other day. I think it is safe to say it's durable. This fits my iPhone 15 pro…
Playing around in Fusion 360, wanted to try another sine wave weave mesh project, this is what I came up with.
Impress your friends and make gifts for your San Fran ("Frisco") pals. Print up to layer at 1.8mm in clear, black or white and the layers above in an obnoxious unsaturated red.
My windshield mount for my cellphone has an over-engineered bracket that attaches to the glass. After a windshield replacement I decided I could make it smaller and less complex. The original looks like this: I'm sure it is better at…
I made this holder for my Hurricane Sheet Metal Hand Seamers, I have 3" and 6" versions that take up a log of space laying down so I thought hanging from a overhead shelf would be most efficient. The 6" seamer is quite heavy so I made the…
My eldest wanted some party gear, this was the result. Print with 0-1.8mm layers in background color like clear, white or black and the rest of the layers in contrasting color like monster green.
Drawer of ziplock bags was getting unwieldy so I made these clips to store the split rings I use in projects. Much better than trying to read the size numbers off the tiny bags that get wiped off regularly. I used PLA and get just the…
Tired of my “pro” meat thermometer kicking around in the junk drawer so I created this holder to attach inside a cabinet door. Amazon Link for Thermometer: https://a.co/d/5NQ2kqq Prints without support, upright in any rigid material.
I got tired of the crappy cardboard boxes that “Dobie” sponges come in, they always fall behind things under the sink. So, I made this box I could screw to the inside of my cabinet. Parameterized so you can adjust in Fusion 360. I used…
I made this handle to hold a “shop” paper towel for evenly spreading out glue stick after adding a bit of isopropyl alcohol. I usually spread a zigzag of glue stick, then spray a bit of IPA on top using a lab bottle and then use this tool…
TLDR; Print the two 3mf files with “PROJECT” in the name on your MMU3 Make you Valentine's Day lovelier with these novelty heart glasses! Can be printed in one color but best done with an MMU, AMS or CMS. The photo shows the frames in…
The plumbing coming up under the sink has ugly holes in the cabinet bottom, the plumber left crappy plastic covers that get knocked off by looking at them wrong. I made these screw down units to annoy the next guy to work on the stuff.…
To organize the pizza topping packets we get from our local Marcos pizza parlor I created this custom size lidded storage box. The packets are 2" wide by 3" tall. Please add comment to request other sizes or create them yourself with the…
Needed a little bowl for my filament clips, added some pazazz with some slicer modifiers to add color.
Tall modern look vase split into overlapping bands for MMU/AMS/CMS Fusion 360 CAD file is fully parameterized, you can adjust vase size, band positions, angles, thicknesses. Import into the slicer as a single object with multiple parts.
My grandson liked playing with a springy prototype I gave him so I decided to make a spring toy fidget. For a simple print the raw shape from Fusion 360 has lots of springiness. I did another with “educational” features using my new MMU3.…
The inside-the-door water dispenser in my fridge drips into the door shelf, this is a custom drip tray that stays securely in place. i used to use a bowel but it wasn't very secure and too short to prevent food items from falling into it.…
Saw a ceramic vase on Amazon, this is my model of something similar. Use "Modifier" object (might need to “Change Type” if you import the raw geometry) for color. Of course, MMU/AMS/CMS needed for color pattern, you could use the modifier…
Needed a spot for my nozzle tools so I whipped up this holder. I used PLA, any rigid material should work, for strength I print in two pieces and use a low profile hex head M3x12mm screw. You can probably just print as one pieces. Attach…
From reddit: https://www.reddit.com/r/prusa3d/comments/15kzlfc/strange_print_result_mk4_prusament_asa/ I don't know what to make of this, any ideas of the cause or how to avoid? MK4 with alpha firmware Prusament ASA (natural) Prusa Slicer…
Double the bling! Only the top/surface four layers are colored to speed up the print and keep more strength. PrusaSlicer PROECT with modifiers, set to your desired colors: ASSEMBLY: Use a short length of filament to attach the arms to the…
Need to mount a camera in a location where is was off to the side of the surface I could screw into so I created this variation to my other mounts. I chose to use this style where I can remove the camera & stand quickly, it's a bit bigger…
Modern look vase intended to be printed with MMU/AMS/CMS. No support needed, any rigid material. UPDATE: I discovered that this vase will print MUCH faster if the color runs through to the inside (fewer color changes) so I produced v2…
A simple vase split into multiple parts for using to color or texture a design. Load into slicer as one object with multiple parts.
I was inspired by a recent model upload to create a parametric paint mixer. This model with associated Fusion 360 CAD file turned out really well. You can customize the width, height, blade thickness, bore hole diameter, bore hole length,…
I've needed screw on lids for bottles and jars several times since I started 3D printing, I've always created a one-off design each time. I've used my experience and knowledge about making lids along with my experience building robust…
NOTE: I have not printed this model, if you do, please post a make photo No support needed. I wanted to see how well it would work to slice a very complex model with my Spiral Fidget Cutting Tool PrusaSlicer would NOT work, it failed…
I modified my fancy chair design to make this three cushion sofa CAD model provided so you can modify in Fusion 360
Needed a lidded storage box for tiny parts like small screws. Hate how much trouble it is to get screws out of the “assortment” boxes from China so I custom designed this box with a ramp to help pull screws out with a finger: The model is…
I wanted a quick way to grab and put away my heat gun one handed, I had it hooked on the handle but that was too awkward while holding something else. Fusion 360 CAD file included, all measurements are parameterized, you can adjust for…
I was inspired by a recent upload to design a fully parametric stacking bin in Fusion 360. The design criteria is to setup parameters for width, depth (front to back), height and wall thickness. There are also a few other parameters for…
I wanted to do a CAD design of an upholstered chair so here it is, CAD file provided so you can modify. Update: now with seat cushion in v3
It printed OK without any support but required a little sanding at the very top. It is hollow with 2mm walls, a bit thicker at the connection. Fusion 360 file included so you can edit all you want. 57.5g filament
I decided to spend a bit of time to create the GOAT parametric Y adapter for pipe and hose. This model is fully parameterized in the magic Fusion 360 WYSIWYG way. You can can open the model in Fusion 360 and simply double click on any…
Hooks to the headrest post on many Chevy truck seat, maybe others. Has built-in support, no auto-generated support needed. Print in ASA so it won't melt in hot summer car temps, unless you live in a very cold climate or only use in…
Dove body wash always leaves a lot of soap in the bottle when the pump runs dry. This allows you to let the last bit of the soap from the old bottle to the new bottle. Screw on and let the bottle drain overnight. Designed to fit the 34oz…
Beyblade X String Launcher Grip - Handle This add-on attaches via M3 screws, no alterations are made to the launcher and the grip can be removed without leaving a blemish. One 25mm long M3 machine screw (24mm to 30mm will work) Two 12mm…
My first multi-platform (Fusion 360 & OnShape) parametric design - A box with hinged lid and snap closure The latch uses a small tongue in the box base that mates with a matching notch in the lid, this provides a nice audible snap when…
Edited in Fusion 360 to improve the shape of the keyring eye and made the whole whistle 30% bigger. The people I printed it for use a lanyard or purse for keys so size isn't as important as it is for pocket keyring people.
Added a paracord lug to the blank dust cap model PrusaSlicer PROJECT file included along with a naked STL See upstream project for details I also added three tiny paracord lug models you can put in your “gallery” for slicer remixing
First design from scratch for TPU, used Sain Smart 92A TPU in blue, Fusion 360 archive is parametric so you can adjust overall length along with thickness, width, etc.
I need a hook for things that don't work well on a traditional hook like gloves so I can hang them up to dry, I wanted something that I could use a single finger to “open”. I come up with this bypass design with enough stability so I can…
To support fundraising for a middle school drama performance I created this cookie cutter and my wife made cookies to sell at the concession stand. These sold out before the performance began each night for a nice “profit” to fund the…
I made these boxes to hold various size ziplocks in our bag, foil and wrap drawer. The cardboard boxes created a chaos. Because the drawer is fairly deep I also attached a platform under these boxes to lift them up to a comfortable height…
I made these boxes to hold various size ziplocks in our bag, foil and wrap drawer. The cardboard boxes created a chaos. Because the drawer is fairly deep I also attached a platform under these boxes to lift them up to a comfortable height…
My shapes collection for PrusaSlicer or OrcaSlicer Gallery You can add to gallery one-by-one or Load.. on demand. To bulk install into your gallery copy the individual stl files directly shapes directory in the slicer settings area. For…
I created a thin walled solid body (0.4mm thick) that can be used to “cut” any model into a “spiral fidget” shape. You can mix different “inside” and “outside” shapes to make interesting combos. The examples provided are an “inside”…
I printed in PETG but anything should work. I positioned the base in upright position and the top slider sideways on end with support. see images and “positioned” stl file. I printed the TPU Strip in Sainsmart 92A TPU. Any kind of elastic…
I'm making custom box covers for the “mystery boxes” I have in my basement. Some are low voltage junctions or places where electrical runs were extended. Now they are all permanently labeled using this .3mf with Prusa Slicer 2.6's text…
My daughter and wife have been making string art projects for kids in the special needs community. They have to hammer in hundreds of small nails fairly straight and accurately placed. I came up with this nail holder that allows good…
My son wanted a Squirrel target for shooting with his slingshot. created this remix that is thin (1mm) and has a separate stand that snaps on. I made a bunch out of PLA and the stand snapped on for all but one color, I just used a hot…
![Safety Pin Box (MMU/AMS logo [optional])](https://media.printables.com/media/prints/1123615/images/8481007_ddc362be-5bb3-441a-85e9-01119815c9cb_41aada23-8075-43df-a328-a1550cc24af3/spbox.jpg)
![WIP: LSH [NOT COMPLETE]](https://media.printables.com/media/prints/548021/images/4404884_decdcbd3-d858-4753-927b-da6591805030/25c85bd0-cdd8-4815-a54c-cb85df765174_1_105_c.jpeg)
