Heart Lens Novelty Glasses
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Valentine's Day Novelty Glasses
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 17
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
TLDR; Print the two 3mf files with “PROJECT” in the name on your MMU3
Make you Valentine's Day lovelier with these novelty heart glasses!
Can be printed in one color but best done with an MMU, AMS or CMS.
The photo shows the frames in pink, hearts in red with struts in clear. Struts could be white or black if you don't have clear.
User my “PROJECT” file to get a fully setup print or load into the slicer as a single object with multiple parts.
The parts with “Mod” in the name should be set to the heart color and made ("Change Type") into modifiers. “Heart” parts should be clear/white/black and the “Frame” in whatever frame color you desire.
ASSEMBLY: Use a short length of filament to attach the arms to the frame. It can be easier to insert if you heat and stretch out the end of a length of filament as shown.
Insert through the hinge and pull all the way to the far end, use mini needle nose pliers if needed. You can use a lighter to melt a head/knob on the end.
Trim excess and enjoy.
I used back on white in this example to enhance visibility in these photos. I normally use a matching color or clear.
If your holes are really stubborn, you can VERY GENTLY heat up the hinge parts to pull the filament through.