56 models
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Flower with stems 10, 15 and 20 cms - Fleur avec tiges de longueur 10, 15 et 20 cms. Prints better at 0.16 layer height. If you download it, please like. See also :…
The Compact Muon Solenoid (CMS) detector is one of the big four experiments of the Large Hadron Collider (LHC) , the world’s largest and most powerful particle accelerator. The LHC is part of CERN 's accelerator complex in Geneva,…
Hi Hunter, you asked if I had a T-51 suit and I do, unfortunately it needs a lot of work for which is a little out of my league and time wise. Hopefully you or some one else will take the time to improve on it and reupload here for all to…
Flower with stems 10, 15 and 20 cms - Fleur avec tiges de longueur 10, 15 et 20 cms. Prints better at 0.16 layer height. If you download it, think about a like. See also :…
Designed for the Craftsman CMST40730 small parts organizer. It's slightly tapered – shorter side points downward.
hák pro zavěšení strunovky DeWalt DCMST561 na stěnu. Upevnění pomocí 4 vrutů ke stěně. šířka háku je 70mm a maximální průměr zavěšované rukojeti je 31mm. Model tisku “na bok” a tím pádem nepotřebuje podpěry a je zachována maximální…
Pretty straight forward. Print on one end. No support needed and the inside is filleted to reduce filament droop when forming the top.
Wallart of Apollo space program Comand and Service Module (CSM) docked with Lunar Module (LM) as used on the way to the moon. Files include single piece version and precut verion.Overall hieght is almost 1.2m when printed at 100%. You can…
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
Created by Davide Primc for the CMS experiment at CERN. The CMS detector at CERN is one of two multi-purpose detectors on the LHC (Large Hadron Collider). CMS acts as a giant, high-speed camera, taking 3D “photographs” of particle…
it takes about 42 hours to print on my ender5 plus at 10% infill you will need to cut it in parts for smaller printers
Do you love CERN's CMS Detector but want something a little easier to print? This model is for you! This simplified 3-part version can be printed in a bit more than 4 hours, and it's nearly as cool as the full model. The endcaps can be…
This is a keyboard-like button made for my circuit management system, it uses a 7*12.5mm spring, a common 6mm switch, and an m3 short screw. Other modules: Circuit management System CMS Collection by Agasa's Workshop | Printables.com Here…
A catch-all box tray for holding common tools for use with ThermoFisher LC and MS intruments.
A simple divider made for either CRAFTSMAN CMST40709 / ArtBin 6809PC (same bins from the same molds but different branding and colors) These are for the bigger 9 bin storage versions not ones with a ton of tiny slots. This bins don't come…
This is the American MGM-140A (M39) Block 1, a High-Explosive ( HE ), single-stage, Solid-Propellant ( SP ), carrier, Inertial-Navigation-System ( INS ) guided Surface-to-Surface-Missile ( SSM ) used to dispense 950 x M74 submunitions…
This minimalist poster holder is designed for cloth posters commonly sold at cosplay and hobby fairs. The wedges feature tight tolerances, so it's recommended to print them as-is. However, if the fit is too tight, you can reduce the…
Purchased a couple craftsman (model CMST40730) mini drawers only to find they did not come with any dividers. I searched for other models, but they were too basic and lacked indents in the bottom for the little lines, so I made my own,…
The buckle fits the DEWALT DCMST561 model perfectly. I recommend printing with PETG or with a minimum of 60% PLA filling
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
Wedge to raise a bed (10 cms) - Better blood circulation at night - For bottom feet Cale pour rehausser un lit de 10 cms - Meilleure circulation sanguine la nuit.
Hat holder with 10, 15, 20 and 25 cms heights - Support chapeau
This Dewalt trimmer is a great tool, but the balance is off. It is very nose heavy, making it awkward and tiring to use... This small design clamp itself tightly on the main shaft with two M4 screws. Insert a small carabiner into the…
With this part you can have new angles on the camera without need to fixing it to the wall.
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
Mit diesem Adapter kann man einen dauerhaften Absaugschlauch an die Spanhaube anschließen. Mittels Abzweigstück kann man den Schlauch an die Hauptabsaugung der Säge anschließen. Ich habe den Adapter in PETG gedruckt, mit 0,6 mm Düse und…
Lost the rubber foot on my CRAFTSMAN CMST11154 Metal Saw Horse. This is a close approximation of a replacement. Printed mine in PLA and needed just a little persuasion to get in the leg, but it's never coming out again. You could easily…
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
Simple daisy with 10 and 15 cms stems - Marguerite avec tiges de 15 et 20 cms. Please like if you download.
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
CMSgt Stripes for new SMSgt Selects to celebrate at the promotion release parties.
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
Miniature mode of the CMS particle detector at CERN, Geneva. The miniature consists of three files, the central part, the endcap, and endcap feet. The files are printed separately and then assebled. Its possible to print the model in one…
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
Printet in PETG, 100% infill, 0.2 layers and supports everywhere.
A very simple model I created to connect a Ryobi 35mm shop vac hose (RVC-1220I-G) to an Ozito drop saw's 40mm dust outlet (CMS-210). This is honestly just 2 cylinders; one end is 40.25mm ID and 20mm deep, the other is 35.25mm ID and 30mm…
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
This is a dust cover for R210CMS to help the table stay clean
A simple mount to directly replace the original USB-port of the CMStorm Quickfire Rapid-i with a USB-C one. The two parts and the USB-Breakout-Board are simply glued together with superglue, I additionally secured the cables with some hot…
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
I printed this as shown in the photo, with a single set of supports on the bottom of the smaller ring. I use this on my 10" saw, and I don't know if it will work on other models. small adjustments to the size can be made by either…
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
Made this badge for our scientists who are constantly maintaining our instruments and keeping our lab running. Thanks all! Category: Other
Printed it with 50% infill ... seems sturdy enough Added a more compact one ... first version was too cumbersome for use with my grille. Category: R/C Vehicles
Remix to allow a Arduino pro micro underneath. Firmware for FalconBMS: https://github.com/flyCouch/TMS-DMS-CMS-RDRswitches
I made a small robust cards that fits into the two big screws of the modules of the Festool CMS. With this you can fix them. Also with a hole so you can attach it somewhere.
Fresh EOFB60CMSF/UM control knob replacement with a larger margin Print settings 0,2mm layer 5 walls 15% infill normall - snug supports (25°threshold angle)
My locking mechanism for the TS55 at my CMS brocke and I needed a new one. Sadly the fitting one was not available anymore so I ordered another one which is slightly different (10002797). Because the screw layout doesnt fit exactly I made…
Fresh EOFB60CMSF/UM control knob replacement with a larger margin Print settings 0,2mm layer 5 walls 15% infill normall - snug supports (25°threshold angle)
This Dewalt trimmer is a great tool, but the balance is off. It is very nose heavy, making it awkward and tiring to use... This small design clamp itself tightly on the main shaft with two M4 screws. Insert a small carabiner into the…
Simple daisy with 10 and 15 cms stems - Marguerite avec tiges de 15 et 20 cms. Please like if you download.
