Counting matching models…
Due the new printing platform design for the Elegoo Mars 5 Series clean the resin could be more difficult. This drip bracket could help to recover a big part of the non-used resin and reduce the time to clean the platform. Print with…
More detailed information and guide → English Spanish At 3Dwork we have set up an all-in-one test with what, from our point of view, we believe are the most complete tests to adjust our resin printer: Among the tests included: (1) Steps,…
Due to the heat issues that could affect the QIDI 3 Series tool head some clogs were redesigned to improve airflow and to reduce the hotend and tool head electronics temperature. This mod was created for QIDI X-MAX 3, as 3 models are…
QIDI Q1 Pro electronics air flow can be improved, this mod was created to add 80mm 5V, you can use 24V using parallel power splitter using the stock fan, fan holder. If you use 5v, much quieter and enough air flow, you can connect the 5V…
The Anycubic ACE Pro works great but, in some cases, could produce some false filament feed alerts or clogs. This mod could reduce to almost zero when you use cardboard spools or when your spools are near to being finished. Two versions…
This drip bracket could help to recover a big part of the non-used resin and reduce the time to clean the platform. Print with strong infill and at least 4 perimeters.
Due to the new printing platform design of the Elegoo Saturn 4 Series, cleaning excess resin can be more challenging. This drip bracket is compact and helps recover a significant amount of unused resin while also reducing platform…
To adapt our BIQU Hurakan to use H2 V2S REVO we need to adapt BIQU MicroProbe sensor using this universal BIQU MicroProbe for all H2 extruders series. Klipper configuration changes: [probe] ... x_offset: 4 y_offset: -32 ... [safe_z_home]…
The original QIDI activated carbon box keep a lot of space where the heat from the internal chamber will enter to electronics chamber… with this mod we reduce this negative air flow and increase the amount of activated carbon to filter air.
I needed a cover for my BIQU HDMI5 touch display I found this from Armourist and used/adapted it to another 7" display that works really well with a nice and functional design. Feet are reversible and you can use them with 15 and 30 deg,…
My own design to paint/airbrush my minis/figures. Included modular base/stand to 6 minis/figures. Added magnetic 5mm as the option to make easy the management and stand. As an example you can use this from Amazon http://shorturl.at/mxyH7…
Mod to use the incredible Hemera Revo extrusion system on Elegoo Neptune 3 Pro/Plus/Max. using the probe heat inserts M3 for strong joints for all parts wire/cable cover, remember you need to adapt Revo components to Elegoo pcb
The Anycubic ACE 2 Pro works great but, in some cases, could produce some false filament feed alerts or clogs. This mod could reduce to almost zero when you use cardboard spools or when your spools are near to being finished. You can cut…
BIQU H2 print head is one of our favorite extruders for its great performance, being very compact and lightweight, which makes it perfect for machines like the BIQU Hurakan. In our case we have opted for the BIQU H2 V2S Revo version.…
The QIDI Box works great; in some cases, it could produce some false filament feed alerts or clogs. This mod could reduce to almost zero when you use cardboard spools or when your spools are near to being finished. 2 Versions created, one…
To adapt our BIQU Hurakan to use H2 V2S REVO we need to adapt SuperPinda/Pinda 8mm sensor for all H2 extruders series. Klipper configuration changes: [probe] ... x_offset: 5 # Original 0.0 y_offset: -17.8 # Original -30 ... [safe_z_home]…
Use M3 heat inserts Ready to use chains Bltouch support offsets X -21 Y -40 5015 blower fan some supports for zip ties
Spool holders use 608 bearings Use an M8 screw 32cm approx. measure your setup Spool holders use M3 heat inserts to attach feet, as suggested on the start, middle, and end pieces Foots use an M3 screw Drill templates to attach spool…
This is an optimized version of the Bambu Swatch Case, designed to hold up to 100 filament Bambu style swatches samples. Remixed design was created to allow for a lighter and faster printing profile. To assemble: Print 1 * Lid part Print…
I made a mistake when working with the great LaserPecker LP5 and launching a project without remove the laser lens cover… and the disaster happened :). If you lost your cover, by accident or no :) like me, or to have a replacement you can…
Cover for Anycubic Photon Mono VAT to protect resin from UV, should be compatible with Elegoo Mars PRO Enjoy ! Print Settings Printer: Custom Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: SUNLU PLA Green Category: 3D…
The Uniformation GK3/GK3 Pro includes a nice system to drip VAT/platform, recover some resin and reduce the time to clean the VAT/platform. The main issue was you cannot close the cover during drip process, this mod allows you to have…
Simple 60mm fan cover with QIDI logo. Print on ASA/ABS if you use inside chamber or areas with hot temperatures.
Updated my SKR 1.3 with this new dual-use (touch and lcd) TFT screen to allow the best of both worlds in one screen :D. 23/Aug/2020 - Updated Stand and Cover to v2, this version adds support to fix to aluminium profile, nut to clamp both…
Here is the extractor/heater I have made for the Anycubic MONO X based on my Mono design https://www.thingiverse.com/thing:4747256 . I wanted a design with a slim profile that can provide options to extract fume and heat resin caver for…
Here is the extractor/heater I have made for the Anycubic MONO. I wanted a design with a slim profile that can provide options to extract fume and heat resin caver for the best work temperature. All the plastic parts, should be printed…
Currently not printed, work in progress!!! Any feedback will be welcome!!! My first 3D design made in OnShape. 120mm Fan Tube Control Box: compact design printable in major part of 3d printers universal mainboard (currently designed for…
Alternative Cecotec Rockstar 1500 Vacuum Holder with accessories space. The model was designed using Revopoint MIRACO 3D scanner to have 3D reference. Print using PETG/ASA/ABS to require strong weight support, 4 walls, 4 top, and bottom…
Hemera solution is amazing, I used the mod 4 wheel X axis mount ( https://www.thingiverse.com/thing:4076960 ) to mount in a robust way Hemera and used for fan/bltouch mount the solution from Hangtight (…
Under design!!! Nice control box for all your electronics for your 3D printer Universal mainboard holder (currently MKS sBase, SKR 1.3, Melzi) Raspberry Pi B+ holder for your Octoprint 80mm Fan to freeze all electronics with minimum noise…
Under design!!! Nice control box for all your electronics for your 3D printer Universal mainboard holder (currently MKS sBase, SKR 1.3, Melzi) Raspberry Pi B+ holder for your Octoprint 120mm Fan to freeze all electronics with minimum…
My previous control box was really pretty ( https://www.thingiverse.com/thing:3881177 ) but people like me like to modify the electronics often were not easy to manage. JAEC do an impressive remix from my previous version but focused on a…
These are all currently available results.
