P
Printablesvindolin
Parkside PFBS 12 Table Saw
Simple height adjustable, two part table saw for the (Lidl) Parkside PFBS 12 B2. Now with stop block.
- Downloads
- 1,240
- Likes
- 327
- Rating
- 5
All models
Counting matching models…
P
Printablesvindolin
RJ45 Ethernet Cable Clip Repair - parametric
Quick fix for RJ45 plugs whose little clip broke off. Because there are so many variations of RJ45 plugs and every one needs a different version of this model, I uploaded a .STEP file and an editable Fusion 360 file where all the…
- Downloads
- 796
- Likes
- 96
- Rating
- 4.93
P
Printablesvindolin
Parametric, printable, spinning fidget ring (Fusion 360)
I wanted to test the parametric settings in Fusion 360 and ended with with this ring. Load into Fusion 360 and go to Modify->Change Parameters to change these settings: ring_inner_diameter ring_width rim_width spinner_thickness spacing #…
- Downloads
- 539
- Likes
- 58
- Rating
- 5
P
Printablesvindolin
Slingshot Cyclops v1.1
You attach the bands by pushing a looped end into the slot from the side and locking it with a piece of filament through the center of the loop. Print in 0.15mm with 5 perimeters and 13 top/bottom layers. I used different infill…
- Downloads
- 512
- Likes
- 72
- Rating
- 4.5
P
Printablesvindolin
Angry Guard Cat (white eyes)
Print with 0.2mm layer height and change the color after the second layer.
- Downloads
- 258
- Likes
- 99
- Rating
- 5
P
Printablesvindolin
Resin drain bracket for Anycubic Photon Mono
Bracket for draining the excess resin. Fits under the closed cover.
- Downloads
- 212
- Likes
- 20
- Rating
- 5
P
Printablesvindolin
Neopixel diffuser ring (12 leds)
Choose the right case depending on how you soldered the pin header to the back of the Neopixel ring and print in a dark color. Print the diffuser with a clear filament and 90-100% infill.
- Downloads
- 183
- Likes
- 23
- Rating
- 0
P
Printablesvindolin
SG90s metal gear servo - outline
SG90S servo like you get on Aliexpress or Banggood with accurate dimensions. Use as a consruction aid for modeling. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament:…
- Downloads
- 162
- Likes
- 8
- Rating
- 0
P
Printablesvindolin
Thin Radiator Bleed Key Remix
I only added a little tab at the other side of the nut, which makes it easier to remove if it's jammed on the valve.
- Downloads
- 144
- Likes
- 13
- Rating
- 5
P
Printablesvindolin
Magnifying lens clip for Eachine EV800/EV800D FPV goggles
If you need reading glasses and have one of those FPV goggles, you know the pain of only seeing a blurred image on the screen 😓 This little clip let's you use the lenses from one of those cheap magnifying glasses:…
- Downloads
- 143
- Likes
- 17
- Rating
- 5
P
Printablesvindolin
Parkside PFBS 12 B2 wall holder
Wall holder for a wireless Parkside (Lidl) power tool. How I Designed This Made a photo of the bottom of the drill. Loaded that into an attached canvas. Constructed spline onto one side of the contour. Mirrored spline. Extruded as…
- Downloads
- 128
- Likes
- 18
- Rating
- 5
P
Printablesvindolin
Ikea SAMLA stackable organizer trays (vase mode fast printing)
The file samla3x2x2_project.3mf has optimized settings for fast vase printing of the boxes in transparent PLA.
- Downloads
- 128
- Likes
- 28
- Rating
- 5
P
Printablesvindolin
TTGO T-Beam Case for board version 0.7 - Remix
I remixed the model so it fits when an OLED display is soldered directly to the board pins. Changed the diameter of the screw holes so that 3mm screws can be used. Added spacers for greater stability. I printed the front with the display…
- Downloads
- 121
- Likes
- 6
- Rating
- 0
P
Printablesvindolin
Porous silica gel container with screw on lid
Modeled in Fusion 360 and then made permeable to air by modifying the models with cylinder volumes that delete the perimeter/bottom/top layers for the parts that should be porous. The 60% gyroid infill gives a very small pore size that…
- Downloads
- 107
- Likes
- 9
- Rating
- 5
P
Printablesvindolin
Remix for the Super Lube 85g tube with M14x1.5 threads for lubing of linear bearings.
My Super Lube tube had a M14 thread so I hacked the model in Fusion 360 to fit the tube. FIXED Category: 3D Printing
- Downloads
- 102
- Likes
- 7
- Rating
- 0
P
Printablesvindolin
Ford Focus Turnier MK3 - back door bumper replacement
Print in TPU with 10% infill. Use the long version if the plastic cap broke off from the stopper (flat black thing on photo) to compensate for the missing 3mm. Use the short version if the cap is still in place.
- Downloads
- 95
- Likes
- 21
- Rating
- 0
P
Printablesvindolin
Floral Bracket 01
You can either use floral_bracket01_bare, scale to your needs and drill some holes with the 3d modeler of your choice, or use one of the two ready made versions with holes for dry wall screws.
- Downloads
- 87
- Likes
- 34
- Rating
- 0
P
Printablesvindolin
40mm "aerodynamic" fan cover
cover for a 40mm fan Category: 3D Printer Accessories
- Downloads
- 86
- Likes
- 13
- Rating
- 0
P
Printablesvindolin
2430 adapter for 2032 cells
Spacer that let's you use 2032 cells in devices that want a 2430 cell.
- Downloads
- 81
- Likes
- 5
- Rating
- 5
P
Printablesvindolin
Digital caliper holder for Ikea Ivar shelf system.
Digital caliper holder for Ikea Ivar shelf system.
- Downloads
- 80
- Likes
- 19
- Rating
- 5
P
Printablesvindolin
Flashforge Creator Pro - feet replacement
Print in TPU or other flex material with 100% infill.
- Downloads
- 73
- Likes
- 12
- Rating
- 5
P
Printablesvindolin
ABUS D6X TPU Keyhull
Use the provided GCODE or open the keyhull_prusaslicer_project.3mf file in Prusaslicer.
- Downloads
- 59
- Likes
- 9
- Rating
- 0
P
Printablesvindolin
Crank for the Planetary Gearbox
A crank for the Planetary Gearbox. Use a small screw to attach the handle. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: ACME PLA Category: Parts
- Downloads
- 36
- Likes
- 4
- Rating
- 0
P
Printablesvindolin
Universal Ikea Ivar attachment clamp system
Universal attachment system for the frontside of Ikea Ivar racks. You can easily remix your own attachments by using the model from example.stl and either combining it with your model or boolean substracting the front part of the…
- Downloads
- 34
- Likes
- 14
- Rating
- 5
P
Printablesvindolin
Compass holder for paragliding cockpit
Compass holder for those cheap little plastic ball compasses. Print in TPU and slab some Velcro on the bottom.
- Downloads
- 32
- Likes
- 3
- Rating
- 0
P
Printablesvindolin
Hackaday badge
To print this in two colors, you need to change your filament at a specific z-position. Use your slicer to determin the position where the logo begins and tell your printer to pause at that height. Change the black filament to white and…
- Downloads
- 29
- Likes
- 10
- Rating
- 5
P
Printablesvindolin
Boox Poke3 paragliding cockpit case
I printed mine in PETG with supports around the holes. You can loop a little piece of TPU filament through the holes as shown on the second image, to secure it against falling out of the case and remove it if you're waiting for your…
- Downloads
- 26
- Likes
- 7
- Rating
- 0
P
Printablesvindolin
Paraglider recue line spindle.
In the unfortunate event of a tree landing, the cord can be lowered to the ground so that rescuers can attach a rescue cord. BBQ skewers can be inserted into the holes to make winding easier. (I lost my DHV cord with the lead weight)
- Downloads
- 22
- Likes
- 6
- Rating
- 0
P
Printablesvindolin
Solar/Alternator plaque for Rotary Cam Switch SZW26-20
This is a replacement for the original 0/1 plaque that comes with the SZW26-20 Rotary Cam Switch. I'm using this in my minivan to switch between the cars 12v and an external solar panel to a power station. Print with 2mm layer height and…
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
Printablesvindolin
Replacement feet for plastic folding stool
Print with TPU and ≥=70% infill. Pull out the worn original feet with a screw driver or knife and push in the replacement feet.
- Downloads
- 16
- Likes
- 4
- Rating
- 0
P
Printablesvindolin
Ikea Ivar holder for flexible build plate
For storing a flexible build plate vertically in a Ikea Ivar shelf.
- Downloads
- 16
- Likes
- 3
- Rating
- 0
P
Printablesvindolin
Flash Forge Creator Pro - active cooling fan holder
Snap on 40mm nozzle fan holder. I'm using mostly the right extruder so that's what I build this for. But there is also left version and a center one. I'm not sure how good the center version works as the fan is blowing between the two…
- Downloads
- 15
- Likes
- 6
- Rating
- 0
P
Printablesvindolin
Karpofly safety clip
Safety clip for Karpofly paragliding harnesses. Remove one of the hooks for closing the pod and attach the clip with a short cord to the chest strap then close pod with the clip. This way the cockpit hangs around your knees if the getup…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
Printablesvindolin
Super simple fan holder for the Flashforge Creator Pro
### UPDATE: I made a better one: http://www.thingiverse.com/thing:1272643 This is a really simple and functional holder for a 40mm nozzle fan for the Flashforge Creator Pro. It simply snaps into the two small holes on top of the extruder…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
Printablesvindolin
Cockpit frame for the Bigme B6
Print the frame in PETG and the button in TPU or PETG. The frame model already comes with a brim because I had problems with the slicer brim ripping off the print on my A1 mini. Use a cutter to remove it from the print. Use a 3cm piece of…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
Printablesvindolin
Case for an Arduino compatible geiger counter.
You can buy the electronics from http://www.ebay.com/usr/impexeris . The opening for the tube is for a SI-29BG. Category: Gadgets
- Downloads
- 0
- Likes
- 1
- Rating
- 0
These are all currently available results.