Counting matching models…
4mm Thread Pitch, custom thread design that I used to better understand threads and bolting. Rather than try to copy a thread pitch optimized for other manufacturing methods I put some thought into optimizing for FDM printers. When I…
This is a photo frame that I made for Mother's Day that fits a standard 6X4" picture, requires glue or some small screws to hold it together. Update: Tape seems to be the best method of securing the photo in place.
This is a flexible fabric heart and is print in place. I used a brim to keep the model on the bed but it might work just fine without it.
This is a Chainmail/3D printed fabric design that can be printed interlocking or snap together. saw some of the other designs that were really cool but I couldn't figure out how to going them so I leveraged another design I had to make a…
This is a print in place plastic bearing that spins quite nicely.
This is a replacement back ramp for the "Paw Patrol - Paw Patroller Rescue & Transport Vehicle". Needs a Metal Coat hanger for attachment to the patroller. Print Cut coat hanger to size plus 3 cm on each end Bend one end at 90 deg. Insert…
Skid steer or Bobcat profile Category: Other
This is a spider that is printed in one piece and has highly moveable legs. Printed at 0.2 mm layer height, no bottom layer to improve bed adhesion, and 4 top layers. I elected to use a brim since I wasn't going to be around while it was…
Instructions: Suggest printing with No Brim. 0.2 mm layer height and adding supports in the mouth and for the tail bridge. Carefully remove the supports afterward. I try to make designs without supports but this one couldn't be avoided.…
I made these glasses since I couldn't work up the nerve to buy real Oakley sunglasses so I figured the next best thing was to buy a pair of replacement lenses and then make a 3D printed frame. They work well and they are a great…
This is my version of Rickert’s Spaceship which is described as looking like a yacht from the book The Defender. from the book “…He takes her to the fifth ship in line. A large double-decker beast that looks more like a yacht than a…
Print off the book ends. Then print off the folding mini book or the simple mini book templates. Add stickers of your favourite books and you are done
This is my interpretation of the Sticky bomb that is fired from the fictional story The Defender written by Larissa Soehn. The book The Defender, by Larissa Soehn can be purchased from Amazon.ca…
Printed on the Bed, no need for a Brim These are the base files, I'm hoping that someone can make some cool necklaces or use this as the backbone for an articulated creature (dragon, worm, snake….) UPDATE March 25, A Few users reported…
I wanted to make the longest bolt and nut I could.
This was a test for another project that I repurposed as a money gift box. Print at 0.2mm and then use.
This is a cat toy that prints in place. I was making another design and then my cat kept stealing the chain. You can print it with a Brim or not. It's up to you, both work. Add a string to the back of the chain to dangle this chain from a…
This is a book nook to hold and display your mini books while on your normal book shelf. It opens to display your books. Requires 2 short pieces of wire ( I used a metal coat hanger) for the hinge Assembly: Line up the holes in the…
These are 2 ladders that I made for a doll house
This is a space ship that I designed just for fun Printed with a Brim, No supports required Could be scaled down by 50% and it still works.
This book nook is for mini books but the book nook is designed to look like an actual book
Print Tips: No Brim Added a modifier around the head to include 6 perimeters to help strengthen the clasp. Used organic supports in the mouth with a paint on brush in Slicer on just the edges. Dragon Bracelet that fits the wrist of a…
This is my version of Rickert’s Spaceship which is described as looking like a yacht from the book The Defender by Larissa Soehn. ( The book is available on amazon and etsy) This simple version has been modified from the original so that…
This is a Simple book Case for Mini books. I removed the bottom layers when printing for better bed adhesion. No Supports required.
This is my version of Rickert’s Spaceship which is described as looking like a yacht from the book The Defender. from the book “…He takes her to the fifth ship in line. A large double-decker beast that looks more like a yacht than a…
This is an Ikea Samstad Bunk Bed Water Bottle Holder for a 75mm diameter (80mm diameter hole) water bottle and room for some fabric on the lip. Printed without supports and at 0.2mm layer height
This Puzzle Cube has one path from start(large rectangle) to end (smaller rectangle) that passes through 3 cones/numbers meant to unlock a 3 digit lock. The final combination starts in the large rectangle and passes through 3 numbers and…
I designed this quick gift box for a Nintendo Switch game container. I wanted to hide the true nature of the game shape when giving a gift. Thenintendo games come in such a specific container. The Next time I print this design I think I…
This is a REMIX of my interpretation of the Sticky bomb that is fired from the fictional story The Defender written by Larissa Soehn. This Version adds a string holder so it can be used as an ornament. The book The Defender, by Larissa…
My daughter wanted me to make a Net to go with her Paw Patrol Toys. Chase the pup has a net that he uses to save people. I made 2 net like shapes and then used the mesh modifier to print them. This is the simplest print/design I have ever…
This is a simple bolt and wing nut that I made to learn more about threads and how to design them. Enjoy
This is a keychain version of Rickert’s Spaceship which is described as looking like a yacht from the book The Defender. from the book “…He takes her to the fifth ship in line. A large double-decker beast that looks more like a yacht than…
This is a "mini book" with a living kerf hinge. This book can contain two micro books. Just glue on the covers you want.
This is my interpretation of the Time and Space Travel stones from the book The Defender written by Larissa Soehn. From the Book "Nestled against the tree are two foreign-looking objects. The first object is a perfectly round orb. Light…
This model of an ant is print in place. This model prints in under 5 hours. I removed the bottom layers, used adaptive cubic infill and also reduced the top layer to 4 instead of the default 6. I used a layer height of 0.2mm and elected…
These Holders help keep your tacos upright
Print using supports. The flame can be printed and then glued onto the body.
This is a quick addition of wings on the neko cat. This model combines two designs that allow remixes. Thanks to Triple G Workshop and Tritschi for the models
This Print is a Marker cup for the wall. I used some screws to attach them to the wall. Its been working well for a long time.
Print as many as you like.
This is a Claw with Drive screw linear actuator. I wanted to leverage by bolt and nut design somehow and this is it. First part to print is the nut with wings. Then you can print the body and add a print pause or color change to…
No supports required. Print the body then print the wings. Extra info: This took 5 revisions and about 8 hours to design and it leveraged the tail geometry from my xenomorph dragons. I didn't use the remix tag because I used the original…
I was going to make some cute foot prints for the elf but I noticed that our elf just has round feet.... and my daughter would notice details like that. Ihis is be be used with flour or sugar to make foot prints
This was my first hour with Blender. I figured I would upload it and see how it went
Print with supports. I scaled the model up so that the arms were a bit thicker. Workflow to create: Chatgpt image with prompt: "Create a standing Spinosaurus with a white background" Then I took this image to the free online Rodin Ai tool…
This is a fun but impractical way to pick up easter eggs. There are 2 types of claws, one that requires supports and the other that doesn't ( but the eggs might fall out) Print the Nut first, then print the body with a print pause before…
These gears can be used to encode/decode secret messages and to be used in puzzles. By Providing a starting point such as Square = A. Then you can provide a list of symbols to relay a secret message. We used them for relaying combinations…
One Side is flat and one has a chamfer, take a look when orientating them on the print surface. We purchase a duct tape craft book and it needed some extra bracelet rings, so here they are.
These bars are smaller versions of the larger locking bars I posted earlier. These ones are better in my opinion since they fit more boxes. I've printed lots of these…
Bracelet for Valentines day, Prints in place and snaps together. This is a redesign similar to a model available in my store, but I completely remade it which is why I have designated it as a new model and not a remix.
Print, Add Credit Card into the Rainbow Star and then thread on the unicorn horn handle. It works using the any standard NFC terminal. We love paying for things using our credit card wand. It gets a smile from the workers and brightens…
I suggest keeping the threads printing at 0.2mm on both the nut and bolts. other sections of the model can be printed with 0.3 layer height. I also removed the bottom layers and used a brim to limit the warping on the model base. There…
Easy to Print model, surprisingly fun to stack in as many ways as possible.
This remix uses all printed plastic pieces and removes the OpenBeam aluminum pieces. All you need are some elastics and some glue after you print the pieces. This is the Dual Arm Blade used by Alexia Harmon in the book The Defender. This…
Improved version of my earlier design to make in thinner and easier to print.
Modified the Body in Blender to add more wrinkles and to make the eyes happier. I also added a fire tail that is split into 2 pieces to add a bit more color to the final model without paint.
Needs 1 metal coat hanger for the hinges Needs 4 #8 machine bolts and 4 #8 nuts. ( or M4 screw) Recommend adaptive cubic infill for the body. Print the body, 2 doors, and the wood pieces and finally the roof. Add a little glue and you are…
This is the spaceship depicted in book 2 of the Gatlin Series; The Destroyer. This is a spaceship that is mostly engine. Its a remix of a previous design; since I just love the shape so I wanted to uses it for another model. This is a…
There are 2 sizes shown based on the diameter of the cup. I found that a 5.5 mm shelf around the edge worked well for mini books made from national geographic magazines and a 27 mm height seemed to catch most of the mini books we made.
This is a sword that I designed to have modular sword sections so you could make it any length. My initial design was to emulate a Roman style gladius so I made it a short sword. I designed it to use a standard 3/4" PVC pipe as the…
This is a custom nail polish holder that I made for the Vanreesa UV Kit since all the labels are on the caps.. Printed with a modifier to not include the top layers of the holder.
This is the Dual Arm Blade used by Alexia Harmon in the book The Defender. This blade is attached to the forearm and in the book is launches forward 8in in front of her hand when she thrusts forward. The book is available on Amazon…
This is a test print I made up to test out a timelapse set up that I had. I spells out the message " I did it Wooooo" See the timelapse video below for the result. I referenced the Prusa blog on how to make a timelapse set up,…
Coupled with your own bracelet this dragon head can act as nice addition to your rainbow loom crafts. Print Tips: No Brim or Brim, both work Added a modifier around the head to include 6 perimeters to help strengthen the clasp. Used…
Print at 0.2 layer height, no supports. Contact me if you want the commercial license. *There is an earlier version of the arms and legs that brings in more articulation and offers more customization included below if you are interested.…
This is a pickle ball racket that can be printed and then glued together. I printed 0.3 layer height using 10% infill and adaptive cubic on another design and that worked quite well and ended around 300g. I added Brims, removed the bottom…
This magnet is a remix of an old design and a remix of the "Joy Bucket" or Vision Board Concept. The idea is to stick pictures of the things that bring you joy and attach them to the various tentacles on the magnet. It serves as a…
These are some templates we used to paint and draw polka dots in one of the rooms in our house
These Bars were designed to be screwed to the boxes and then allow a series of locks. We used these bars in a series of escape room games and locked box mystery games. Printed without supports and without a brim.
This is a remix of a spaceship I designed previously and 3Dprinty's bobblehead system Take a look at the 3Dprinty's bobblehead system on the Emoji bobblehead design, Its a really cool way to make quick and easy bobbleheads in slicer. This…
Key chain that looks like a spine just add a key ring. While not a true remix, This design came about while I was testing the tail section of my Flexi Dragon Xenomorph shown below.
This is a coffee freshness meter for a coffee machine that you share at the office. Print off the pieces, suggest a color change for the numbers and then place by the coffee machine to help indicate the time the last pot was made.
This is a ring holder that has a claw that is driven by a threaded rod to hold your ring. First part to print is the nut with wings. Then you can print the body and add a print pause or color change to encapsulate the nut in the body. I…
Prints in 2 pieces, it’s a great illustration of the 45 degree rule and it slide together really nicely. This is a pen cup remixed from another design I had. The connection is based on the OpenBeam extrusion profile. I had printed a test…
Quick print, add a dab of glue and insert ¾" PVC pipe
Tip: Ensure to add print supports under the tail.
Use case, I was asked to create a toy helicopter that could carry a net to be used in toy dinosaur rescues. I couldn’t find a suitable model so I used Ai tools to quickly make a model and modify it to fit. Elapsed design time 45 minutes…
This is a 3D Model intended for use in an upcoming Mystery Game brought to you by a Friendly Lil Mystery. This 3D model will be printed and the “View Model Function” will be used to assist in solving the puzzle. The actual Puzzle is in…
This is my interpretation of the Energy Blaster or Energy Pistol used by Alexia Harmon in the final battle from the book "The Defender" by Larissa Soehn. The book describes the blaster pistol with a triangular barrel that fires energy and…
This is the Bomb Launcher that fires the Alien Sticky Bombs mentioned in the original post. The Back Section print has a color change in the gcode, but it's not necessary. I wanted it since this was going to be an interactive display…
Designed to sit on the edge of a shelf or table. Designed by an 8 year old in Blender 3D
Remix of my earlier model to see how the INDX can hold up. I'm surprised this was only a 14 hour print with ~ 1700 tool changes I remixed this design for the colormix challenge. I don't yet have a CoreOne INDX 8 Tool Head printer so the…
This is a battle between Super Hero Joel and DRU. Joel is creating a hexagon/sphere enclosure to capture DRU. I remixed a remix of Joel and also remixed my model of the genetically engineered Alien Drug from the book The Defender to make…
This is my interpretation of DRU the genetically engineered Alien statue from the book The Defender. I printed this at 300% larger than the files I uploaded. The small version is good but I like the detail on the larger version. from the…
This is a money slot we used to save up for a recent trip. It needs a few tiny screws to hold it on. I carved a small slot into a picture frame/shadow box to use as our visual savings.
Upgraded Card Holder to make game play easier so you can see more cards.
These are very small suitcases for use with Dolls and Action figures.
This is a pickle ball racket that can be printed and then glued together. I printed using 15% infill and a gyroid infill, but the weight was 400G which is at the maximum allowable. I also used 10% infill and adaptive cubic on another…
This is a web cam cover with a reminder to record sessions. assemble with a little bit of glue.
This Simple Version is easier to assemble and print and has the Honeycomb wings. This is my interpretation of the Energy Blaster or Energy Pistol used by Alexia Harmon in the final battle from the book "The Defender" by Larissa Soehn. The…
This is the 3 piece remix of the Energy Blaster from the book “ The Defender” by Larissa Soehn (available on amazon and etsy) I received feedback that the orginal design is really cool but the number of parts can be daunting to the…
This Simple (smooth) Version is easier to assemble and print. This is my interpretation of the Energy Blaster or Energy Pistol used by Alexia Harmon in the final battle from the book "The Defender" by Larissa Soehn. The book describes the…
I like to print this without any top layer for the base to see the infill. Sometimes we pour acrylic resin into the base. This is quite a popular item at craft fairs. I suggest playing with the infill type and percentages to make the…
Printed with supports at 0.2 quality setting in prusa slicer
This model uses a set springs to hold a ring in mid-air. Printed at 0.2mm layer height and standard settings
Customized version of http://www.thingiverse.com/thing:739573 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=739573
Quick and easy print to connect Rainbow loom bracelets
Various sizes of heart bracelets. If needed you can print the smallest version multiple times to make a long chain. The 7 Link Version is likely the best for adults and the 5 link version is great for kids around ages 5-9. Print Tips:…
Simple Dragon egg: Designed by my 8 year old. Print on 0.3mm 5% infill. Chop the bottom as you desire to print The 3mf file has been scaled down and chopped. The STL file is the full design.
