Counting matching models…
Designed based on the handle of a Dewalt DCF787. I cannot confirm whether this will fit other Dewalt tools. Features Positive retention on the bits so they do not fall out Produces a satisfying snap when bits are inserted into the holder…
This is a rough approximation of the flashbang from CSGO. It prints in multiple parts that fit together without the use of glue. All models should load in their recommended printing orientation. The handle and the top cover require…
These cookie cutters are easy to print and easy to use. They should be in the correct orientation for printing already. All the cutters included in this set are 3.5 inches (88.9mm) across their longest dimension. I typically print cutters…
Can be printed either upside down or right side up. In either orientation, I recommend using organic supports everywhere and either a 0.15mm or 0.20mm layer height. I added two different heights, 26mm and 20mm, to hopefully accommodate…
Print at 0.15mm layer height. Models should be in correct orientation for printing. Tolerance at mounting point is 0.10mm on either side which makes for a snug fit. If your printer isn't very good at dimensional accuracy, you may need to…
Quick and easy feet for JBL Flip 3 If you have one of these speakers, you're probably familiar with their annoying, cylindrical nature. These feet are my solution to their cylindricality. ( Is that a word? ) The feet clip onto the speaker…
I attempted to make the added holes fit with the original aesthetic of the vents. Note: The hole for the HDMI port in the cover photo is slightly larger than the one in the included model.
Shelf and cupholder I made to mount onto the headboard of my bed. I have included the .stp and .f3d files for the shelf. I can do the same for the cupholder, if there is interest. The stl is very unlikely to fit your headboard unless you…
This was made based on the basic electronics that come on the Squire Affinity series Telecaster. Nicer potentiometers might not fit in this plate. I've added the .f3d and .step files to allow you to modify the plate to fit your…
Designed this when the cap on top of the stock knob broke. Meant to be used with this adapter: https://blackforestindustries.com/collections/mini-shift-knobs/products/copy-of-bfi-gs-manual-shift-knob-adapter-bmw-mini-revised-clamp-style…
I designed this model based on a Crescent brand adjustable wrench I use often. It requires supports and is not the easiest print. Before you ask me to upload a version without the “CS” on it, let me explain why it is there. The wrench…
This is a replacement for the battery cap on a Ryobi HP45LVN electric screwdriver. The original on mine broke when I dropped the screwdriver earlier this week. I printed mine on a MK3S+ on the Prusament PLA 0.20mm Quality setting in…
This stand allows you to aim your Akaso Focus Mini Projector down at your work surface. I created this stand so the projector could be used to trace images onto sugar cookies, but it could be used for any task that requires aiming the…
Printed at 0.3mm layer height in Hatchbox Yellow PETG. The standoffs are meant to accept heat press inserts for M2 screws. The cutouts in the standoffs are so that the diodes do not interfere with the fit of the PCB. Added an updated…
I did not design this model, only remixed it. I wanted to try open back headphones and I was in the process of repairing my ATH-M40x headphones. I found the original model and modified it to try out a kind of open back style headphone.…
This case replaces the original bulky case on the Solidremote L-Visor-2 garage door remote. No additional hardware is required to install the case on the original circuit board. Note: In the included photos, one of the buttons has a…
I used color changes to make the print in the photos. The included .3mf file has the 2 color change points built in. I started with matte black PLA, then switched to a lighter color to give the lettering some contrast. Finally, I switched…
These are all currently available results.
