Counting matching models…
Little elephant ring holder, can hold multiple rings and has a small tray to store bracelets or earrings or other jewellery. Print settings recommendations Layer height: 0.16mm Infill: 15% No supports needed.
Protective case designed specifically for the TP4056 charging circuit. Featuring a entry point for USB cable, a dedicated exit for power cables, and a secure pressure fit design. With this circuit things can get quite hot so i designed it…
Simple case for the arduino nano for your projects, protects the board and offers access to the usb and exit for the cables. For micro usb and USB-C models. Updated (10/07/2022) added case for USB-C arduinos Using 3x10mm screws. Print…
I was using one of the other anti vibration pads but they kept falling off, and I keep losing them. This design uses the main screw to keep it all in place but requires a 5mm hex tool to remove the screw, but it takes less then 5 minutes…
Protect your valuable floppy disks with this durable 3D printed disk case. This case was designed to be easy 3d printed without the need of support or extra hardware, the minimalist design means a easy print and no waste. The case has…
Upgrade your gaming setup with this stylish and practical wall-mountable display frame designed for PlayStation and Xbox game cases. Featuring a convenient hinge mechanism, this frame allows for quick and easy access to your game…
Protect the striker in the windscreen from scratching and rusting due to constant contact when latching your soft top. These clips break apart with age and can create wind noise. Its not an exact match to original to be easier to 3d print…
I have been playing around with multi colour prints with my Ender 3 printer with a single extruder. I created a few designs for keyrings for the Mazda MX-5. There is 3 different designs, for the different eras of the MX-5 and a Miata…
Replacement handle and switch cover for the Mini R56. The handle started to degrade with time and fell apart so I created this replacement work perfectly. The replacement is glued in place of the old one, I used contact glue for flexible…
Print settings: Layer height: 0.16mm No supports needed Update (06/11/2022) added 2 versions the thin is designed to offer a better close on the spice jars after user feedback.
Super fast and easy print no supports needed. You need 2 hooks to secure each lid see pictures for reference. Details: Infill : 25% Layer : 0.16mm
Overall length: 180mm Print settings Layer height: 0.16mm Perimeters: 4 - so its a little stronger Infill: 15%
The perfect accessory for any Mini enthusiast. The keyring is designed with a simple print in mind and to be lightweight. It features a sleek and compact design that easily fits in your pocket or purse. It is designed to be printed in any…
Super easy print, if your rubber damper for the CSL Elite is broken due to hard use. Change the infill to increase or reduce stiffness, I like it at 50%, I found 25% is too soft for me but that is my personal preference. Print settings:…
Replacement badge for the Lenovo Thinkpad x220, its designed to be printed with multiple colors, but it can be printed in a single color as well. Size of the model : 26.5mm x 9.5mm Print settings: Layer height : 0.2mm Add color change on…
I designed the signed to attach to a power cable so that is not unplugged by mistake. The model has 2 parts, a front plate with the text and the backplate for contrast. You don't need the backplate but I think it looks cool. Print…
A print in place clip for the IKEA octopus PRESSA quick easy print no supports necessary. Update: 17/09/2025: Added a new version that is easier to free and easier to insert the springs. Printing recommendations: Layer height : 0.16mm…
Rev Light and Gear indicator for Sim Racing works with SimHub. Instructions how to build the electronics below. All parts are tight fit and are secured in place with hot glue. Using a cable grommet to keep the cable tight in place. Parts…
Pet food can lid and measure cup for dry pet food. Added 2 sizes 58mm height and a small one with 40mm height if your pet is on a diet. Height : 58mm Height Small : 40mm Lid opening : 101.8mm Radius : 50.9mm Print settings : I used PETG…
A 5mm spacer for a bass shaker used in sim racing. Outer diameter is 120mm the inner is 90mm, the 8 mounting holes are 8mm spaced every 45 degrees. Link to product: https://www.amazon.es/gp/product/B002LQAHPE Printing instructions:…
The Bissell Featherweight accessory holder is an easy way to store and transport an extra nozzle with your Featherweight vacuum cleaner. This convenient tool holder enables you to quickly and easily access the tools you need, instead of…
This travel hook is a convenient and lightweight accessory for any traveler. Designed for simple 3D printing (no supports needed!), it offers multiple attachment points and secure options for holding your backpack. Is a simple print no…
Designed to fit onto a dual marking gauge's guide rods, this shaft clamp lets you lock the relative position of the cutters while still being able to freely adjust the fence for offset. This allows you to preserve identical mortise or…
These are all currently available results.
