Counting matching models…
This item is a low poly face mask perfect for masquerades or Halloween. It has an open mouth and holes for the nose so you can breathe ease, although you might sweat. There are slits on the sides for an elastic head strap. It's sized to…
Was tired of loading other darth buddha models that wouldn't slice correctly with cura and required support to print. Flattened the base of the buddha and modified the head to fit better. Also added a proper chest plate to complete the…
I designed a couple of parts for the Micro Apex 3 inch frame. The front bumper holds an T-shaped antenna. Arm skids offer a bit more protection. A new flex mount camera bracket. Find other mounts using this system at…
Based on my design for the eco camera, I developed the lux version as well. Please let me know if you'd like more angles and any modifications. Link to the eco version:…
I'm not a massive fan of using rubber bands to hold batteries on toothpicks so I design a folding battery holder for 1s batteries. It can fit small batteries like 300mah square shape or the larger 450mah+ rectangle batteries. It fits…
Designed for the hdzero eco camera it will also work with the analog pinch cam. Weighing in at 0.68g this is one of the lightest whoop canopies you can use that actually protects the camera, (your weight can vary on the type of tpu, your…
Designed tpu parts for botgrinder's grinderino. Also designed a camera mount for Yannik's camera system. Added xt60 rear holder. Use the slicer to slice off from the bottom of the holder if you need it shorter.
I like the whoop canopy made by happymodel and also saw that rotor riot develop a tpu version for their vision whoop, but I don't like how heavy it is. So I created my own version which weighs less and protects hdzero v3 cams better. Some…
Introducing the q-tip stick end for an FPV transmitter. The hole is self threading on an M3 bolt. I can create other sizes if anyone asks. I liked this particular stick end since I'm a bit of a hybrid user. Notes: Don't over tighten, it…
A completely redesign of the previous canopy with a few improvements. Easier to install the camera into the canopy. Opens up like snakes jaw. Rigid structure, which helps in crashes and reduced jello on high throttle maneuvers. ND Filter…
UPDATE: Added for rapidfire and eachine pro58. I didn't like the few covers I found for tbs fusion and none of them fit correctly either they didn't catch the notch correctly or broke off making the cover loose or fall off. So I created…
Raises the canopy above the board, should help reduce stress fracture on the vtx or aio5 boards. The camera cage is based on my previous designs and keeps the weight low while giving some protection to the camera. the canopy comes in at…
Just made the model solid. Still a great movie. Watch it, if you can. Category: Props
A 15° to 50° fixed-angle canopy for the C03 camera with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place, a protective horn on top, and a rear antenna…
The original design of the prop guards is by Tiaan Muller and his work can be found at: https://grabcad.com/library/wishbone-bumper-kit-ethix-cinerat-1 I modified some of the parts to fit the frame properly and be 3d print friendly. The…
A 15° to 50° fixed-angle canopy for the C03 camera with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place and a protective horn on top. Lightweight…
I needed an adapter to mount a 30mm video rx to 25mm mounting holes. You can see the mount in the frame on this instagram post: https://www.instagram.com/p/CwiCs7yqgLX/
Raises the eco cam canopy above the board, should help reduce stress fracture on the vtx or aio5 boards. The camera cage is based on my previous designs and keeps the weight low while giving some protection to the camera. The canopy comes…
1s Battery strap for top plate mounting micro drones. Can hold batteries as small as 300mah and larger. Feel free to reduce or lengthen the z height to thicken the strap. I've included the sizes that I use. Print it on its side at your…
This is a conversion kit to make the classic cr-10 into a stand alone unit. The main focus of my kit was to reuse all if not most of the hardware from the cr-10. I used some of the files from the Rics kit and a display mount from Detox77.…
Since the battery holder was very tight fitting and I didn't want to deform my batteries I created a battery strap to replace the battery holder for the BetaFPV Meteor 75 and 75pro frame. You'll have to clip off the original plastic cage.…
Lightweight 3" toothpick frame
A protective canopy for the dji 04 air unit. The front and sides of the canopy have a large air gap built in, should take a solid beating. This is tricky to print. I recommend printing with a layer height of 0.2mm and 2 to 1 walls, and no…
A canopy for the Ldarc 199c camera. It is raised to help reduce impacts on the flight controller and hopefully last a bit longer due to crashes. If more angles are needed please let me know and I will model it up. Update: thickened up the…
A 30° fixed-angle canopy for the HDZero Lux and Walksnail Avatar HD lite cameras with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place, a protective…
Skid pads for the baby turtle fpv frame. One has horns on it the other does not. Just duplicate the file and mirror to have for all arms.
Got tired of having my bmg always jamming due to the bowden setup, I decided to go direct drive. I looked at other offerings on thingiverse, but decided to create my own version which is smaller and more compact with 4 points of…
Avatar walksnail nano canopy with a bad ass mohawk.
I needed a canopy that would protect the dji 04 air/lite for 2s or larger rigs and could take a beating. I've used it In bandos, hit concrete and steel poles and your typical tree. it really works great for toothpicks like the tunerc 3in…
This little cap goes on the end of the focus screw on the laser head to tighten into place. Normally the screw can wear in the back plate and make it difficult to get an exact focus. It also helps avoid tightening into one of the holes in…
Top of the handle broke on my Whirlpool refrigerator, so I created a replacement.
C03 canopy with vtx holder 30 degree angle.
TPU parts for the Flying Squirrel 75mm FPV frame. Includes everything you need to complete your build — camera canopies, flight controller cover, battery pads, and battery straps. All parts designed to work with the 2mm carbon fiber…
Decided to go a complete different direction and based the duct on a ¼ round of a circle. The neat part about this duct design I've included a slot to tie down whip antennas. Let me know if there are any changes or updates.
TPU parts for the Ghost 2.5" FPV frame. All parts designed for the 3mm bottom plate. A separate folder of 2mm variants is included for pilots running the thinner plate. CANOPIES Five canopy options, all 25 degrees. Beta FPV C03 25deg 8mm…
This camera mount is for the ethix cinerat, to hold the Runcam orange or GoPro Session. It also has a cutout on top that fits an insta360 GO2 vertically. The standoffs are bowed and should help with jello in video. Please take note if you…
Recently I picked up a Hachidorii and decided to see if I could design 75mm ducts. Main difference here is that it should coming in a bit lighter and possibly be a bit more durable. Time will tell. I've included the design file for…
Kitsune hdzero Lux camera cage it's set at 25 degrees
SHURIKEN 2" (frame by whooptrooper) printable camera mounts for hdzero whoop camera. Needed taller standoffs to fit the hdzero whoop camera, so decided to roll the dice and create a printable version. Just mirror the camera standoff to…
Camera holder for the newbeedrone Mark2 VTX Cam
This is a collection of cameras mostly whoop sized that I have used as reference when creating whoop canopies. They are low detail and are perfect for blocking out the areas that are important. Hope it helps others in their designs. I'll…
TPU parts for the Wraith 3" FPV frame. Everything clips on — no screws, no zip ties (unless you want them). All parts designed for the 4mm bottom plate. CAMERA CANOPIES Slide down into the standoffs and lock in place once the top plate…
This canopy holds the walksnail nano camera. Made for the phantom frame by geprc. but it can be used on other frames so long as the standoffs are 18mm wide from their center points. This is at a fixed angle of 30 degrees. And it generally…
A light weight holder for a small vtx or rx (receiver) or anything that you might need to add to your build.
xt30 and antenna holder one is inline and the other is set side to side. Have thinner lighter versions as well.
Kitsune eco camera cage with cam-bumper and side cuts for weight reduction.
Skids for the kitsune frame, motor mounts on top of it. Photo of skids on frame courtesy of @monkey.d.cluffy insta: https://www.instagram.com/monkey.d.cluffy/
Unfortunately it's hard to source stock that is the size of the carvera airs bed sometimes. So I created this extension that keeps the cover slightly opened, just enough to allow some extra room and keep the lid down. In the photos I'm…
I designed a durable canopy for larger 2S rigs that can withstand impacts with concrete, steel, and trees. It works particularly well with smaller, lightweight frame types like the TuneRC 3-inch or Baby Tooth by FPVCycle. It's ideal for…
These are all currently available results.
