Counting matching models…
I wanted a better option to mount my radar detector. The top of my dash or tackily on the window is not good enough. Mirror is best option. This is a 3 piece design that uses the original suction cup mount bracket from a Uniden R7. If you…
This worked fine with the “slim mount” 6.5" polk db651s I used to replace the stock door speakers. That and a metra harness they work great. 6.5" speakers are all different and they will just do whatever mounting size they choose, print…
Simple clip to replace the factory on that retains the prop rod into the side of the car. This should work for both supercharged and NA variants of the MR2, I put a slot into this so you can slide it over the factory rod where they…
Simple holster wedge with smoothed sides instead of a hard edge like others. I recommend scaling it up to your preference. Scale to your preference. I recommend 2-3 walls and about 6% infill, 4 bottom layers and 1 or 2 top layers. TPU of…
These are the engine bay intake hoses for the MK1B AW11 MR2 NA. I am currently successfully using the throttle body hose with no issues out of TPU(1600 miles) sub freezing temps and over 95 degree summer days with hard driving. I also…
I made this to replace the dimmer wheel on the aw11. Fit is meant to be very tight, factory wheel has a metal insert for fitment, this is just all solid plastic. Print in a stiff and heat/uv resistant material. ASA will likely be fine.…
Fairly simple battery hold down for the first gen MR2 AW11. This was made to fit the standard 24F group size battery, I believe this is what is stock on these cars. I recommend printing this out of a pretty robust material. I made mine…
I made this to quickly mount a KUSBA to the side of my extruder using the same holes as my 5015 cooling fan. This uses M3 threaded inserts for the board mounting. Some of the 5015 fans vary a bit with the hole to hole distance. This works…
You may want to scale this to around 103% or so depending on settings etc, mess around with it. Also note that the clips on the back are not perfect, this part is usually pushed in and then affixed with some epoxy or glue on the car from…
These are all currently available results.
