Counting matching models…
Print: PETG 3-4 perimeters, cubic or gyroid infill 20% Shelves/rods: diameter 20 mm I recommend beech or oak wood (it has much greater strength compared to spruce or pine) Dimensions: are variable according to your needs, the picture…
The "speeder-FDM.stl" model can be scaled to the desired size and then divided into objects. Each part can then be printed with fewer supports and a better result. There is a gap of 0.2 mm on all sides between the parts that fit together.…
Hru najdete zde: https://www.mojedino.cz/katapult-duel.html
Flat adapter for air extraction into a window with a diameter of 75 mm, for example for a laser. PetG no supports needed ********* Plochý adaptér pro odtah vzduchu do okna pruměr 75 mm, například pro laser. PetG nejsou potřeba podpěry
printing without supports, preferably PLA tisk bez podpěr, nejlépe PLA
This is my interpretation of Rey's speeder. Printable probably only sla. In time, I may try to adapt the model for FDM printing. Printable on a larger scale on an fdm printer, see photo Ver. 4 - Added a few details, control panel...
Figures for the Thud Discworld game. The figures are not in the correct proportions, so adjust them to your liking when printing.
Moje představa robota (malého boha) ze skvělého komiksu "Pod paprsky Zářícího" (Vlastislav Toman a František Kobík)
When printing with FDM, it is better to cut the model a little at the bottom in the slicer.
You need 8 pieces of M3 insert and M3 screws.
Flexible Z-axis trapezoid rod holder inspired by Prusa xl printer for Creality CR6 se.
Pro hru je potřeba: Věž - 24ks Brána - 8ks Zeď - 20ks
Adapter for mounting the Parkside PFBS 12 B4 cordless drill to a stand (diameter 42 mm) *************** Redukce pro upenění akumulátorové vrtačky Parkside PFBS 12 B4 do stojanu (průměr 42 mm) Print from FLEX, 4 perimeters 15-20% infill
MGN12c Z axis linear bearing mounts (40cm) for Creality CR6se. You need: 1. 2x linear bearing MGN12c with carriage (40 cm) 2. 2x extra carriage MGN12c 3. some M3x25 screws 4. some Nuts for Fastener Aluminum Profile M3 5. print 4 grips…
Šablony na sprejování vloček. Šablony tiskněte jako spirálovou vázu (0,6 tryska je lepší než 0,4) Pokusím se ještě přidat držadlo na šablony. Templates for Spray Snowflakes. Print the templates as a spiral vase (0.6 nozzle is better than…
I haven't printed yet (I'm waiting for the material) zatím jsem netiskl (čekám na materiál)
It is better to insert some weights (steel balls) into the infill during the print process for better stability.
Krom tištěných dílů potřebujete - staré kolecko z 3d tiskarny - 1x šroub M5x20 -1x matičku M5 ************************************************** In addition to the printed parts you need - an old wheel from a 3D printer - 1x M5x20 screw…
Print without supports, 5 parts (recommended nozzle 0.6 mm and 3-4 perimeters) - Print from PETG - Glue together - varnish (for waterproofing) - thread rope through holes on sides
Just another calibration cube 20x20x20 mm
Štít pro ETA Gratussino BRAVO 2 Proti odletování kousků při krouhání Shield for ETA Gratussino BRAVO 2 Prevents flying pieces when cutting Recommended material PETG
Náhradní díl pro Lidl Elektrický univerzální kráječ SAS 100
These are all currently available results.
