Counting matching models…
(pour le français, voir plus bas) Decoration bat for Halloween with bendables wings. You can use tape to hang it on the wall. Be careful when removing it from the board. The bat is 0.4mm thick, print at 0.1mm or 0.2mm. For another models:…
This is an attempt of Edward's pocket watch design. Thank you for being indulgent, I am discovering Fusion 360 xD Printing with Smartfil filament. Print instructions Layer: 0.05mm Infill: 10% Support: yes
(pour le français, voir plus bas) Measuring spoon 2-in-1 measuring spoon: tablespoon and teaspoon. Be careful, this is for food and can have some intoxication risk. You must be careful how to print and use it. I have no experience with…
Remix of an another remix. Thanks a lot to @MichaelMcGold_296810 and @BMoArtist for your work! Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : no Support : yes (organic) Duration : ~1h Printer : Prusa Mini+…
Be careful, you need to change the needles size. Update: the needles size: In green: 22mm (4x) In yellow: 27mm (1x) In orange: 32mm (4x) In red: 37mm (1x)
(pour le français, voir plus bas) Change easily your cabinet knob according your mood :) Screw the main part (ECK - Main), the “visible” holes must be vertically aligned Insert your selected cabinet knob (ECKH - *******) Turn the cabinet…
(pour le français, voir plus bas) Decoration spider for Halloween with bendables legs. You can use tape to hang it on the wall. Be careful when removing it from the board. The spider is 0.4mm thick, print at 0.1mm or 0.2mm. For another…
(pour le français, voir plus bas) Plexiglass plate support for 3mm thickness. Just print 2 or 4 times, depending if you want use one or two plates. For each support you need: 3 washers 4.2x20mm 3 screws 4x24mm Plexiglass plate was too…
(pour le français, voir plus bas) Dot pot with drain holes (vase mode only) with the plate ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Pot à points avec trous de drainage (en mode vase uniquement) avec un plateau
(pour le français, voir plus bas) Fully Printable V2 Balisong Butterfly Knife with M3 and M4 nut holes. Please go to the original projet to download the blade. You can use 2 M3x10 and M4x10 screws. Settings Nozzle : 4mm Resolution : 0.1mm…
(pour le français, voir plus bas) Decoration skeleton for Halloween with bendable arms and feet. You can use tape to hang it on the wall. Be careful when removing it from the board. The skeleton is 0.4mm thick, print at 0.1mm or 0.2mm.…
(pour le français, voir plus bas) Change easily your cabinet knob according your mood :) This is the Halloween edition! Please, this project contains only the custom parts for Halloween. You need the main part (ECK) in my original…
(pour le français, voir plus bas) Dracula decoration for Halloween with bendable arms. You can use tape to hang it on the wall. Be careful when removing it from the board. The decoration is 0.4mm thick, print at 0.1mm or 0.2mm. Source…
(pour le français, voir plus bas) Scream decoration for Halloween with bendable arms. You can use tape to hang it on the wall. Be careful when removing it from the board. The decoration is 0.6mm thick, print at 0.1mm or 0.2mm. You can…
(pour le français, voir plus bas) Awning crank bracket with 14 mm diameter. I use two 4x18mm screw. Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : no Support : no Duration : ~1h15 Printer : Prusa Mini+…
(pour le français, voir plus bas) Ice blick replacement for Ice Breaker game Settings Nozzle : 4mm Resolution : 0.25mm Infill : 15% Rafts : no Support : no Duration : ~25m Printer : Prusa Mini+…
Awcrank support for a 13.9mm diameter tube with a 13.3mm notch ~~~~~~~~~~ Support pour manivelle avec un tube de 13.9mm et une encoche de 13.3mm Settings Nozzle : 4mm Resolution : 0.1mm Infill : 15% Rafts : no Support : no Duration :…
Be careful, if you download the only_elf_support file, it's mean only the support but you need to merge with the original elf. The elf_with_support file, it's mean the support AND the elf.
(pour le français, voir plus bas) Rabbit medal, size: 70x77x3mm. Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : no Support : no Duration : ~45m Printer : Prusa Mini+ https://shop.prusa3d.com/en/66-original-prusa-mini…
(pour le français, voir plus bas) Wall support for 2 dometic remote controllers. Max remote controllers size is 56x18mm. Use two 4mm screws to fix the support. Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : no Support : no…
(pour le français, voir plus bas) Another headphone support for PS4. The PS4 must be in standing mode. Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : no Support : no Duration : ~2h Printer : Prusa Mini+…
(pour le français, voir plus bas) Smartphone mounted support for streaming you 3d print. I use 4 x 25mm screws. The wall part thickness is a little bit thin in the original print. The support move a little bit. I made an improvement but…
(pour le français, voir plus bas) If the hole for the lens from the RPi camera case by @ZORK77_18465 is too small, I adjust the model (with 16.4 mm hole diameter) Settings Nozzle : 4mm Resolution : 0.1mm Infill : 15% Rafts : no Support :…
(pour le français, voir plus bas) Clap closure for the base of the punching bag “Outshock Boxing Machine 100” Switzerland: https://www.decathlon.ch/fr/p/boxing-machine-100-gonflable-adulte/_/R-p-308689 France:…
(pour le français, voir plus bas) Müllex Single 35 trash bin fastener. Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : yes Support : no Duration : ~40m Printer : Prusa Mini+ https://shop.prusa3d.com/en/66-original-prusa-mini…
Français ci-dessous Docking station for smartphone (with wireless charger) and tablet. Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : no Support : no Duration : ~6h Printer : Prusa Mini+…
(pour le français, voir plus bas) 4-Screws bits storage for Bosch UNEO suitcase (drill bit included with purchase) Settings Nozzle : 4mm Resolution : 0.15mm Infill : 15% Rafts : no Support : no Duration : ~1h Printer : Prusa Mini+…
(pour le français, voir plus bas) Abrasive sponge case Sponge size: 69x97x26 mm (Bosch brand) Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : no Support : no Duration : ~45m Printer : Prusa Mini+…
(pour le français, voir plus bas) Top support for candies dispensor. Settings Nozzle : 4mm Resolution : 0.1mm Infill : 15% Rafts : no Support : yes Duration : ~1h15 Printer : Prusa Mini+ https://shop.prusa3d.com/en/66-original-prusa-mini…
(pour le français, voir plus bas) Lizard magnifying glass for the following book: Title : Cherche et trouve le caméléon Editor : Mango EAN : 9782740433096 ISBN : 2740433093 I took a book from the public library from my city and the glass…
Français ci-dessous Use this dock with your iDance jukebox (model PARTY BOX DJX100MK2). Have a support for your smartphone with a possibility to add a wireless charger. Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : no…
These are all currently available results.
