Counting matching models…
Wanted a cap that sat a little firmer on, as they tend to fall off, or crack when you try to make them sit well. Recommends printing with maximum 0.1 layer height. Printing multiple at once is no problem. Remember dry filament. You might…
One fits 3 cup, while the other fits 6 cup. 6 cup have not been tested. I hava also made a tamper :-) It is only intended to collect the coffee in the funnel, not compress it. Print instructions You don't need support, but orient the…
There are 4 versions. 1-cup (48mm), 2-cup (52mm) and 3-cup (55mm). Venus (61mm). I hava also made a funnel to make it easier to not make mess (check out my other designs) :-) It is only intended to collect the coffee in the funnel, not…
This is a set to bleed shimano hydraulic brakes. Use an o-ring on the cup. The clamp is for holding the hose securely to the caliper I also have one as a version with a flat bottom, which needs support (…
Infill Swatches / Display / Samples / Test These are easily adjustable inn Prusaslicer. Just click on infill in the menu and choose percentage and infil. You can also adjust the size. I have made some pictures to make it easier for…
Fits both Pi Cam V1 and V2. One version with holder for cable and one without cable holder. Uses 10mm M3 screws. Get in touch if you have any questions or if there is something wrong. Sorry for the bad photos.
This is a set for bleed shimano hydraulic brakes. Use an o-ring on the cup. The clamp is for holding the hose securely to the caliper All you need is: syringe hose (I use a hose from a 2-stroke carburetor) Bleed Block (…
The PocketSpool helps you to keep your fishing line untangled during storage and use. Uses a spring loaded ball to make an super satisfying rattling line unloading experience. I made it originally with steel ball and steel spring, but…
Uses M3 nuts and bolts. No support needed. Contact me if there is something you are wondering about / something that is wrong.
Adapter that fits some of Nilfisk's hoses. Used with @luma's Airlock model. Needs support.
A FUSION360 file is attached. The pot was made for personal use so the FUSION360 file is not perfect. I have translated the PARAMETERS to English to make it easier. The STL model is adapted for use with a toilet paper core of 38mm, to…
Labels to put on the vent valve. HB, HF, VF and VB. Print with PETG
Protects against dust and scratches. As well as blocking light if you print at night or just do not like to look at the screen :-) Recommend to printing in two colors. Has made 3MF and g-code for both MK3S and MINI for this. One for PLA…
Dewalt Airlock adapter Ø33,8 - 35,8 mm. Look at the picture for measurements. With FUSION 360 file. The disc on the end must be removed before use. Is only for stability during printing.
Wedge to lift the lid. Provides extra air flow. You only need one in the middle.
Labels to put on the vent valve. HB, HF, VF and VB. Print with PETG
To keep cables close to the wall or ceiling. Since there are many different cables and nails, I am posting the FUSION360 file. You can adapt to your own needs. Printed mine in PETG.
Made this as I wanted to use the LACK table I had. The HotBox is slightly larger than the table surface, so it was not possible to put it directly on. There will therefore be a small gap between the table and the box. Have tried to…
Fits headbands with a width of up to 34mm. NO SUPPORT
Adapter for grindstone with 20mm hole to Tormek. Fits JULA grindstone (243973). It must be pressed in, but fit will vary from printer to printer. It is possible to adjust with sanpaper or simular for a perfect fit. Is designed so that it…
Vise jaw protector / cover to protect what you put in the vise. The FUSION360 file is created with parameters, so it is quick to modify. Space for magnet, but works without also. Print with PLA, or other "soft" material such as ASA/ABS. I…
Use a thin steel wire as a hinge. I used a drill to screw the wire through. https://uniortools.com/eng/product/1643-4-pro-chain-wear-indicator
Made this to be able to more quickly test suitable tolerances on different printers. The model uses parameters in Fusion360 to be able to change the numbers faster. Two nuts, two screw heads and two screw threads. For both flat and…
Fits both Loctite and Zap A Gap 7g/0.25OZ and 5g/5ml. Probably other types as well. The hole is 29 mm x 20 mm. Fastened with a screw or similar. Fits pegboard which is about 25mm / 1 inch between the holes. Needs support on printboard if…
A disc to mount the Gardena Robotic lawnmower securely with screws. FUSION 360 FILE IS INCLUDED
MSR multifuel bottle protector. Protects the bottom of the bottle when pumping on hard surfaces. 325, 591 and 887 mL bottles.
To make the text easier to read, change the color on layer 6 at layer height 0.2mm. Or use the 3MF file. Premade labels: 85% 90% 95% 100% ISO JIF WINDEX Fits bottle 39,6mm (1,55 inch). Can be enlarged in Prusa Slicer
These are all currently available results.
