12 models
Update: 8 slot rail is now filled. ----------- Scope can't depress far enough? Use 1.5 degree down angled rail. My Zius BK-1S throws darts at 50 m/s (165 fps). At 10 meter range (33 feet) I experienced 20 cm (8 in) freefall drop, which is…
2026 July 8 Most recent code is at https://codeberg.org/dr_a_gon/foam_dart_blasters Code here still works, just older. Version 5.1 Added flyback diodes. New Version 5 Updated 2026 May - Single trigger, computer controlled flywheels &…
The on-off switch is easy to accidentally push. I have pressed that little stick-out black button so many times by accident already. This puts walls around the switch, to prevent this. Put over the top of metal plate, using same screws.
I tried some shrouds but they wobble and don't feel good. Also the Zius only supports the barrel at one end, creating barrel wobble. This shroud fixes that. Use M5x8 button head screws to attach to the blaster (a spacer is provided, M5x6…
Significant Updates 2025 Aug 14 — New more grip track pads (experimental) 2025 Aug 17 — Added product pages for dual motor steering ESC and gearboxes, and more assembly instructions. 2025 Aug 21 — Stronger rear sprocket / final drive and…
You could buy a Worker Blaster stock, or a copy of the Chinese factory part, or you could buy 8mm rods and grind and file like a hero, or you could buy 5mm steel round bar and put this printed notched cover on. In the photo, the whole…
FJ-Z05 solenoid instead of OOD Neutron into Protean. The FJ-Z05 is a known solenoid in the foam blaster community, is under ½ the price of a Neutron, and is easy to obtain internationally. I have tested the fit but not launch. As standard…
Jan 2025. You probably should not use this, there is a better way. You can clamp to the metal buts on the front of Wasp, like the official “dragon” BCAR does that was released by Colonel Wasp themselves. ------------------------- NOTE:…
This is a part that fits the Robak 2.2 3d printed rc car: https://www.printables.com/model/119715-robak-2-rc-car --- I drove Robak 2.2 on concrete. It hit a pothole and became inverted. The car slid on the top, damaging the shocks, a…
Usage The bolt end supports the motor shaft. The BB allows the flywheel to pivot to find its level. Ensure the BB and the bolt are aligned when the clamp is closed. Apply slow even pressure ensuring the wheel is level. This thing isn't…
What and Why I don't know how people are aligning wheels on Gryphons. So I made this to allow an alignment spacer to be used under the wheels. Untested I have not tested this. The parts will fit, but vibration? Is it a problem? If so, it…
I needed a way to bring a spare Gryphon flywheel cage to an event without damaging it, that didn't involve printing a 2nd blaster. So here is a 3×2×15 insert for Gryphon cage that is compatible with gridfinity. The cutout at the bottom is…
These are all currently available results.
