Counting matching models…
A one layer test to help make sure your Z-height is correct, use .2mm layers, select print and then use live adjust Z to tune in your Prusa to the perfect layer height. Your as it lays down the diagonal lines, the lines should be able to…
2 small Gridifinity dremel organizers. the first one holds 16 Dremel bits, while the second one holds a small sharpening stone, the chucks, disks, and 3 bits. Hope you like it!
A zippo lighter stand for gridfinity. has choice of putting magnets in the bottom to help guide light into place but doesn't need them. Uses standard 6x2mm gridfinity magnets.
All credit goes to GDop26, I just figured that Printables could use the spring thunder files to make finding and using them easier, I'll gladly take them down if GDop26 would upload them to printables and message me! Where I got the…
Holds both toenail and fingernail clippers. first slot is 17mm x 16.5mm second slot is 13mm x 12mm
Spotify code that takes you to the Taylor Swift home page :) I highly recommend Just using the pre-sliced models, but if you can't: Instructions: Import the code itself and then the code chain of your choice. (Note: code chain 1 is the…
Holds a 3oz tube of superlube, has a 33mm hole that's 13mm deep. Has a hole in the bottom of the holder to glue magnets in to hold the bottle. I glued magnets in the hole and in the cap of the bottle to help hold it in better and give it…
A DeWalt Drill holder. I used it to mount my drill under my table for easy access. To mount yours you can just use super glue or drill holes for nails. I used the optimization feature in fusion 360 to create the holder so it's very…
All credit goes to GDop26, I just figured that Printables could use the spring thunder files to make finding and using them easier, I'll gladly take them down if GDop26 would upload them to Printables and message me! Thingiverse…
Holds your Philips one blade, can be easily put in and removed, Happy printing! :)
Holds a normal stick of deodorant in a 1x2 gridfinity form factor. The hole is 31mm x 65.5mm, a cylinder is cut out down the middle that's 16mm in diameter
Added a gridfinity mount to a Fitbit charger. I also shortened how far the charger sticks out so it all fits in a single square. Also print on it's side
A gridfinity charger for your Sonicare Toothbrush.
A DZP mk2 left handed holster. I got this model on the DZ website but you have to put in a bunch of info on it and it's kind of hard to realize it's a thing because it's not on any 3D websites so I thought I'd put it here :) Use M3 screws…
A 1x1 gridfinity that holds a Gillette razer.
A 2x2 gridfinity flux holder. hole is 78mm wide by 4.9mm deep.
A 1x2 Gridfinity cologne holder. Should hold most mid to small sized cologne bottles The box is 64mm x 30mm Happy printing
A heatset insert press made from some extra parts I had laying around. Uses 4 smooth 8mm rods, 6 Lmuu8 bearings(can get away with 4 or 5 though), 12 m2 screws(8 that are 6mm long, 4 that are 10mm long, though can be longer), it also uses…
Holds 9 tubes of some cheap thermal paste a bought, the holes are 6.8mm in diameter. It also holds some thermal paste spreader spatula things.
Holds the Kobalt pipe cutter for Gridfinity!, is a 15.3mmx21mm by 13mm deep for other uses.
A vertical lift I designed for my first year engineering class October/November 2023. Uses a 1:3 drive ratio to lift the object and has a accuracy of ±0.075mm. Don't expect to lift anything heavy too, it uses the small steppers that run…
Holds your chap stick(Carmex or O'keeffe's) and floss. For the floss the hole is 28mm x 18mm For the Chapstick the circle is 18mm in diameter and the box is 15mm x 22mm. Happy printing!
Holds a OralB charger and toothbrush as well as a Philips oneblade and a tube of acne cream.
An adapter plate so you can attach an m4 extruder on your Voron v0. I suggest using abs to print. attaches using m4 screws and nuts to the m4 and uses m3 screws to attach to the Voron. uses the default holes in the back plate of the…
It replaces the front barrel piece of your nerf stryfe to allow for M-LOK rail attachments. No supports needed :)
It's a throttle tube for the CRF50F, exactly the same as the OEM; Because the plastic was a bit different I used wd40 to lubricate the bar but it fits great! the normal thottle tube fits over the end of the bar like the OEM, but the…
Holds a 2oz tube of ep200 epoxy. hole is 27.5mm in diameter. Has a small indent for a magnet if you want to glue magnets to the putty tube to make it stay better but it doesn't need it.
This allows you to use your old x-axis bar to reinforce your frame by completely boxing it, it allowed for 7-12% faster acceleration recommendation for input shapper. Can be mounted with m3 screws between 6-12mm in length. Total mod time…
Holds a pair of tweezers, a cuticle cutter, a needle, and a Philips oneblade. There's also a hold for a magnet to hold the oneblade in place if wanted. magnet hole is 6mm by 2mm, happy printing! Needle hole: 3mm diameter Tweezers: 11mm x…
Turns a small command strip hook into a platform to put stuff. Used some generative design on the bottom for the cool factor. Happy printing!
Raises the feet of the Voron V0 by 3-4mm and also moves them out to help get them out of the way if you have a large power supply
Turned a 4inch HDMI Display-C into a second screen for your laptop. uses, 4 m3 screws, 4m3 heatset inserts, micro usb to usb, small usbc dock, 180° hdmi adapter, and a the screen. Here's the youtube video I made on it:
These are the MOD upgrade for the mmu2 but I reworked the idler door to be much more reliable and easier to work with, so far have had 0 issues caused by it. Features: -Reworked idler door for more reliable detection -reworked filament…
The hole on my Thornton's reward card broke and I couldn't find a replacement for it so I decided to make a 3D printed frame for it. Enjoy! Should fit any rewards card that's approx 50-53.8mm X 25-28.6mm pause at 2mm to insert card.
Relocates the bit extension, and allows for 8mm and 10mm sockets to be stored. You have to cut out a little piece of the retaining clip to hold everything in place but it will still hold the original extension if needed. You'll need to…
These are all currently available results.
