P
Printablesredthemesetup
Multiboard WD40 / Spray can holder
Simple holder with multiboard inspired designs to cut down on plastic used. Uses 2 push fits on the back, which requires these snaps:…
- Downloads
- 776
- Likes
- 134
- Rating
- 4.88
All models
Counting matching models…
P
Printablesredthemesetup
Multiboard Olfa / Utility knife holder
Quick and simple olfa knife holder Print at multiboard settings out of your favorite hard plastic
- Downloads
- 296
- Likes
- 44
- Rating
- 4.75
P
Printablesredthemesetup
Multiboard Silicone Wire Holder
A remix of beakerz gridfinity wire holder to adapt it to multiboard! Ever get sick of looking at ugly brown boxes with multicolored pubes sticking out of it? are you sick of trying to close that pesky box before all of the wires slip out…
- Downloads
- 290
- Likes
- 49
- Rating
- 4.83
P
Printablesredthemesetup
Multiboard X-Acto knife holder and blade storage
Just a remix that adds storage for up to 5 blades Print with multiboard settings EXCEPT if you are having tolerance issues, then try 2 walls instead of 3
- Downloads
- 130
- Likes
- 19
- Rating
- 4.5
P
Printablesredthemesetup
HSKRC XL5/6/7/8/9 Rush MAX Solo VTX Mount
Quick and dirty vtx mount for the awkward and hard to mount Max solo VTX. Update April 2024: Added a version that connects the two and adds A holder for a radiomaster RP1 ELRS receiver Print in TPU 100% infill with no supports
- Downloads
- 86
- Likes
- 4
- Rating
- 0
P
Printablesredthemesetup
Multiboard FNIRSI DSO-152 Holder
A quick and easy to print mount for your portable oscilloscope needs. Requires 2 of these flatheaded bolts to mount: 9MM small thread T bolt prints in orientation provided in file, no supports, standard multiboard settings.
- Downloads
- 65
- Likes
- 4
- Rating
- 0
P
Printablesredthemesetup
ELRS, VTX Antenna and GPS Holder for HSKRC XL5/6/7/8/9 Frame (or 27mm standoff spacing)
Print in the orientation shown in the slicer pic with tree supports. The softer the tpu the better since you will have a better time to fit gps in, as it's a tight squeeze Fits the HSKRC XL frames, as well as any frame that has a rear…
- Downloads
- 55
- Likes
- 2
- Rating
- 0
P
Printablesredthemesetup
Antenna Add on for BigMcstinky whoop canopy
Added an antenna mount for the 30 degree bigmcstinky, but also included the antenna mount portion so you can add it to any mcstinky mount. UPDATE April 2024: Added a shorter slightly lighter and more low profile antenna mount and added a…
- Downloads
- 46
- Likes
- 10
- Rating
- 0
P
Printablesredthemesetup
Ultralight Dipole antenna holder for Whoops
This is an ultralight ultrasecure dipole antenna mount for canopies that just use the front holes on the stack. Works on the air65 frame for sure, but will work on any whoop that you can squeeze an antenna between the back brace and aio.…
- Downloads
- 42
- Likes
- 5
- Rating
- 0
P
Printablesredthemesetup
HSKRC XL5/6/7/8/9 XT60 Connector holder
Use 80-100% infill and print out of tpu. use original screws to mount on top.
- Downloads
- 33
- Likes
- 2
- Rating
- 5
P
Printablesredthemesetup
Mastercraft Precision Screwdriver Holder / Carousel
Try not to print with brims, if possible use rafts. you can use 30% infill for the base but for the actual screwdriver holders 100% is recommended
- Downloads
- 28
- Likes
- 4
- Rating
- 0
P
Printablesredthemesetup
M100 GPS + Antennas holder for Source V5
A simple light GPS mount option for the source one V5 Frame, since most I could find were either too heavy (racer brain) or didn't have enough tilt (like seriously who cruises at 30 degrees?). Uses your standard two screw SMA mount, I…
- Downloads
- 27
- Likes
- 0
- Rating
- 0
P
Printablesredthemesetup
Nano Cam Adapter for HSKRC XL5/6/7/8/9
Print Out of ABS or PETG, 100% infill. .16mm layers help as well.
- Downloads
- 25
- Likes
- 0
- Rating
- 0
P
Printablesredthemesetup
XT30 Lite Capacitor holder
Nice little cap holder, super light coming in at .8g with my tpu, super light compared to what I could find out there. I like to use a tiny bit of heatshrink to keep the leads semi isolated, and it works good. print at 100% infill, 0.4mm…
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
Printablesredthemesetup
1S GNB 660mah Battery end cap
print at 100% infill with 2 walls (should print well with a .4 nozzle since the walls are .8 thick). use a nice strong glue on the outside of the battery and connector to secure it (I used e6000)
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
Printablesredthemesetup
CLEARVIEW Ender 3 v2 C270 webcam mount
After searching the web tirelessly for just the right ender 3 webcam mount, I said screw it and decided to just make my own. It sticks far enough out that you can see the WHOLE bed which apparently not a lot of people value looking at…
- Downloads
- 19
- Likes
- 5
- Rating
- 0
P
Printablesredthemesetup
Walksnail V2 / 20X20 Adapter for HSKRC XL5/6/7/8/9
This is a model I made for the hskrc XL series frames that fits the walksnail v2 vtx. Print flat with supports for the small overhangs on the pillars, prefferably with tpu
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
Printablesredthemesetup
Recursion Scythe Race Fin
Is your scythe looking a little on the small side? Has your girlfriend stopped looking at your scythe the same lately? are you hearing “I like it the way it is” a little too often lately? WELL have I got the perfect addition to your sythe…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
Printablesredthemesetup
Maple Light & Flyfish Osprey Seatbelt holders for Scythe & Similar
Seatbelt mounts that fit the maple light and flyfish osprey antennas (Two of the cheapest lollipop style antennas) to fulfill race directors wishes. Print out of TPU, fine setting with tree supports on.
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printablesredthemesetup
Cone Adapter for "Service Rite" and other Coil cleaners
Just a couple quick adapters for the servicerite kit you get off amazon, nothing fancy but it gets the job done. there is a range of sizes from small to big, so it should fit most systems. for my toyota matrix it was the small that fit…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
These are all currently available results.