Counting matching models…
Tree of Life - Hueforge Sized so you can print the frame on a standard sized printer. You can use any black PLA for the base layer, but you will have much better hueforge prints with Matte Charcoal Black, I've had great results with…
Beautiful Mermaid on the Rocks - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm…
Here's a grommet for passing a 5mm or similar sized cable through a wall. There is a split where you can install the cable with the heads attached, great for cables that already have the heads installed. Print in TPU/Flex for best…
Add your T-Link Tapo C100 camera to the inside corner of your Original Prusa Enclosure. Mouns via a single hole using a M3x8 screw, screw will cut the threads. If you find the holes are too loose or tight for your printer, you can edit…
Burning Man pendant for my niece, the idea is to breath some color into it with a Adafruit neopixel jewel and a trinket. There's a space for the neopixel jewel to set, along with ample space for trinket & lipo battery: Check here for the…
Dystopian Overlord - Hueforge, HR Giger inspired Sized so you can print the frame on a standard sized printer Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Matte Charcoal…
Luna Moth - Hueforge Sized so you can print the frame on a standard sized printer Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size Filaments Used: PLA PolyLite Black…
We Are the Machine - Hueforge, HR Giger inspired Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is…
Celtic Skull - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. This one is quite a bit thicker than my usual Hueforge prints, the black parts were way too floppy without the added…
Black Lab Portrait - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size…
T-Rex Hueforge #2 You can safely ignore messages from your slicer about enabling supports on all of my hueforge designs, they are not needed and will mess up the print. Print at 100% infill with a layer height of 0.08mm with a base layer…
Bald Eagle on the Hunt - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size…
Elven Princess Warrior - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size…
The Beatles fridge magnets, remixed from: https://www.printables.com/model/160934-the-beatles The magnets I used are here: https://www.amazon.com/gp/product/B0CCVPVQ1L/ Magnets should friction fit nicely, but you can add a very small drop…
Yin-Yang - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size Filaments…
Tempus Fugit, Risus Manet - Hueforge "Time Flees, the Laughter Remains" I'm starting to make these at 180mmx180mm so that you don't need a larger printer to print a frame if you want one. See below for frame recommendation. Print at 100%…
Gothic Raven - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size Filaments…
Cogitationis Machina (Thought Machine) - Hueforge, HR Giger inspired Sized so you can print the frame on a standard sized printer Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Matte…
Cheetah Mom and Her Baby - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in…
Project: HR_Giger-13.hfp Sized so you can print the frame on a standard sized printer Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size Filaments Used: PLA PolyLite Black…
Cheetah Portrait - Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Sized so you can print the frame on a standard sized printer. See frame recommendation below. The Model is 180x180mm in size…
Hummingbird #6 - Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2.1mm and the…
Gandalf #5 - Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Dark Grey Transmission Distance: 1 PLA PolyLite Steel Grey…
A Soldier's Prayer - Hueforge Portrait There is a companion wall plaque for this portrait showing the Soldier's Prayer I've used for years. You can find it here: https://www.printables.com/model/1327654-a-soldiers-prayer-companion-plaque…
Ornate Wolf - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size Filaments…
My favorite nurse at the VA Hospital I use asked why I hadn’t created any regular house cat prints, so this one is for her :) Maine Coon Cat #1 - Hueforge Sized so you can print the frame on a standard sized printer. See frame…
Hummingbird #7 - Hueforge I'm starting to make these at 180mmx180mm so that you don't need a larger printer to print frames if desired. See below for frame recommendation. Print at 100% infill with a layer height of 0.08mm with a base…
Project: surreal_skull-1.hfp Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size…
Ukulele Strap Hook - TPU Quick 17min print that replaces the hard plastic ukulele sound hole strap hooks that most straps come with. Those plastic hooks can scratch the sound hole of your uke quite a bit, so why not replace it with…
Ambient temps in my Arizona workshop can push temps in the Original Prusa Enclosure too high when printing high-heat projects. this quick little print will prop the doors open a small amount, allowing some heat to escape while still…
Here's the next in my snowboarding animals series, the Snowboarding Lion. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Dark Grey…
Novacula Mortalis - Hueforge You can safely ignore any alerts in your slicer about needing supports for all of my Hueforge designs, do not enable supports as they will mess up the print. Print at 100% infill with a layer height of 0.08mm…
Geronimo #1 - Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Dark Grey Transmission Distance: 1 PLA PolyLite Steel Grey…
All the great features of the original model, with a larger hole for your glue stick and a hole for a General Swivel Head Deburring Tool. I've also added a quick 10 minute print (hex_test.stl) to verify that this will fit your deburring…
AI Generated Hippie Cow Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Dark Grey Transmission Distance: 1 PLA PolyLite Steel Grey…
Another in my snowboarding animals series - Snowboarding Raccoon Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Dark Grey…
Eternal Requiem - Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Dark Grey Transmission Distance: 1 PLA PolyLite Steel…
Great Horned Owl on a Fence Post - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is…
Yet another magnetic nozzle reminder set. Uses round 12x3 magnetics, which will press fit or you can glue them. I used these magnets: https://www.amazon.com/gp/product/B0CCVPVQ1L/ Included are tags for 0.25, 0.4, 0.6 nozzle sizes, and…
Hippie Burro 3 - Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Dark Grey Transmission Distance: 1 PLA PolyLite Steel Grey…
Orc Preparing for Battle - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in…
Hippie Orangutan - Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Dark Grey Transmission Distance: 1 PLA PolyLite Steel…
Werewolf in a Suit - Hueforge Sized so you can print the frame on a standard Prusa printer Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA…
Biker Santa Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x135.58mm in size Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Dark Grey Transmission…
Hummingbird #11 - Hueforge I'm starting to make these at 180mmx180mm so that you don't need a larger printer to print frames if desired. See below for frame recommendation. Print at 100% infill with a layer height of 0.08mm with a base…
Hippie Lion - Hueforge I'm starting to make these at 180mmx180mm so that you don't need a larger printer to print a frame if you want one. See below for frame recommendation. Print at 100% infill with a layer height of 0.08mm with a base…
Baby Orangutan in a Flowered Hat - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is…
Willie #10 - Hueforge Sized so you can print the frame on a standard sized printer Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size Filaments Used: PLA PolyLite Black…
Whitetail Buck - Hueforge (The darker diagonal section on the bottom/mid left of the picture of the print is a shadow from the enclosure lighting, the background is white with no shading anywhere) Sized so you can print the frame on a…
Hueforge portrait of Slash from Guns N' Roses, Velvet Revolver Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm…
Willie #2 hueforge, from AI created image. I've added the .3mf file with filament changes included, just change it to suit your needs. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA…
Maine Coon Cat #2 - Hueforge This is the second in the series I created for my favorite nurse at the VA Hospital I'm a patient at. Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100%…
T-Rex Ball Hog - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size…
Simple storage for a set of 8 precision drivers. I made this specifically for the Klein Tools 85617 Mini Precision Screwdriver Set , but it should work for any driver set with the same characteristics. Here's the link in case you want to…
I thought maybe the inner wheels of Wingman94's excellent Raspberry Pi ZeroBot Pro design needed my signature Ying Yang bling ;) You can find Wingman94's design here: https://www.thingiverse.com/thing:2800717 Print Settings Printer Brand:…
Willie #8 - Hueforge I'm starting to make these at 180mmx180mm so that you don't need a larger printer to print frames if desired. See below for frame recommendation. Print at 100% infill with a layer height of 0.08mm with a base layer of…
This is a simple companion plaque for my “A Soldier's Prayer - Hueforge Portrait” Created within PrusaSlicer. Print with a .2 layer initial layer and layer height. I recommend printing slowly using 1 perimeter at 100% infill for best…
These are all currently available results.
