P
PrintablesCrazytiti
Piege à frelon bocal le parfait / Asian hornet trap
C'est un remix j'ai ajouté 2 oreilles pour la stabilité.
- Downloads
- 474
- Likes
- 32
- Rating
- 5
All models
Counting matching models…
P
PrintablesCrazytiti
Kingroon KLP1 220mm head fan
Note : it does not work on the 230mm version. See the commentary section. 10/03/2025 : v8 raised version got an airflow improvement after beeing water tested v9 same airflow for non raised model. 03/05/2024 : v7 add a raised version, 7mm,…
- Downloads
- 322
- Likes
- 32
- Rating
- 4.33
P
PrintablesCrazytiti
Speaker adapter for BMW F30 F31
It's an 4" adapter to fit universal car speaker into original slot. Don't forget to put foam on both side for a good sound. Can be made out of wood with traditional jig saw ;) Category: Automotive
- Downloads
- 170
- Likes
- 17
- Rating
- 0
P
PrintablesCrazytiti
dellorto sha 15 venturi
It's a venturi for dellorto famous SHA 15 Should provide more airflow With space to keep the starter.
- Downloads
- 156
- Likes
- 6
- Rating
- 0
P
PrintablesCrazytiti
RC paramotor buggy
02/12/2024 : new chassis v2 Trike RC paramotor for small parafoil. Designed for oldschool 540 motor, should work with brushless too. Use 4 18650 in 2s2p to not exceed the voltage of the old tamiya ESC Or if like me you have a small…
- Downloads
- 152
- Likes
- 17
- Rating
- 0
P
PrintablesCrazytiti
RC 1/10 wheels
Here are some wheels of my design. Category: R/C Vehicles
- Downloads
- 131
- Likes
- 26
- Rating
- 0
P
PrintablesCrazytiti
Kingroon KLP1 fan kit
I just convert the files in stl. Edit : added config files.
- Downloads
- 118
- Likes
- 8
- Rating
- 5
P
PrintablesCrazytiti
1/20 Suzuki samurai body
08/2022 Edit : added all SLDPRT files 1/20 suzuki samurai body for LOSI micro RC crawler. Made with some details like doors / lights... it fit an LOSI micro crawler (1/24) => http://www.youtube.com/watch?v=WyRClRk7SSw Instructions To get…
- Downloads
- 83
- Likes
- 7
- Rating
- 0
P
PrintablesCrazytiti
barbie torso
It's a torso for barbie clothes Remix from a well known torso aka "MULHER_1-2" Category: Toys & Games
- Downloads
- 68
- Likes
- 23
- Rating
- 0
P
PrintablesCrazytiti
Diadem cats ears gabbys dollhouse
Remix to make it sturdier. You can print all the pieces or you can just use some marker on the tiara.
- Downloads
- 60
- Likes
- 6
- Rating
- 5
P
PrintablesCrazytiti
Replacement key AKAI MPK mini mk2
This is a replacement Key for the AKAI MPK mini mk2 I just glued it You may need to file it to fit it perfectly. Made in PLA, should work with ABS. Another guy make another key, you may need it : https://www.thingiverse.com/thing:5165853…
- Downloads
- 60
- Likes
- 10
- Rating
- 0
P
PrintablesCrazytiti
SCX10 ting tong 14, 16, 20° C-HUB + 3 links mod
2025 06 25 : News : i've added a full 3 links set : the C-hub and the panhard bar support, see pictures. Beware : to have no bump steer the panhard and servo link need to be the same length and to be parallel. Use the v3 and the servo…
- Downloads
- 60
- Likes
- 11
- Rating
- 0
P
PrintablesCrazytiti
RC printed Buldozer
130mm RC ABS (work in PLA too) printed Buldozer with servo motor and gears laptop batteries 7805 voltage regulator "all functions" each thread and the arm. Note : printing in ABS made it easy to assemble with solvent. Instructions ERRATUM…
- Downloads
- 60
- Likes
- 13
- Rating
- 0
P
PrintablesCrazytiti
Polly Parc
It's a Park for Polly Pocket obviously! See the advert ! https://youtu.be/QEZDWX9TBSQ You have a manually operated seesaw, a working slide and a double swing. Trees and bushes to play hide and seek. And of course a bench for tired parents…
- Downloads
- 57
- Likes
- 10
- Rating
- 0
P
PrintablesCrazytiti
KLP1 sturdy Cover stop
This is another design for the cover stop. I made mine because i broke the other plus i want it a little more vertical. Print upside down without support. Category: 3D Printer Parts
- Downloads
- 52
- Likes
- 6
- Rating
- 0
P
PrintablesCrazytiti
Parametric Wrench : tilted
It's a remix with 15° tilted hole for better usability (like true wrench) original : https://www.thingiverse.com/thing:9704/ Category: Hand Tools
- Downloads
- 48
- Likes
- 2
- Rating
- 5
P
PrintablesCrazytiti
Super strong servo arm (clod buster)
25/05/2024 : v2 for servo with shorter bit It's a super strong servo horn for tamiya clod buster
- Downloads
- 41
- Likes
- 5
- Rating
- 5
P
PrintablesCrazytiti
Android mobile phone stand universal
28/04/2019 : added a 10" tablet model News : v3 with full width rail, prevent some slippy phone to slide in between ;) Update : new version with lengthen base prevent it from falling with >3.5" phone (tested with 4 and 4.5") Universal…
- Downloads
- 37
- Likes
- 0
- Rating
- 0
P
PrintablesCrazytiti
Neato Botvac Lidar Pulley (no support)
It's a remix of the original with no support needed. https://www.tinkercad.com/things/fxlI4BvneEF/ Category: Household Supplies
- Downloads
- 33
- Likes
- 4
- Rating
- 0
P
PrintablesCrazytiti
clothespin (clone of wood one)
clothespin to fix broken one
- Downloads
- 33
- Likes
- 2
- Rating
- 5
P
PrintablesCrazytiti
Yet Another On Axle Servo Clod Buster
This is another on axle servo support. But I designed this one to keep the original bumper and servo saver ;) Don't forget to print 3 brace and use longer screw. Make the linkage with original plastic parts and some long M3 screw with…
- Downloads
- 32
- Likes
- 3
- Rating
- 0
P
PrintablesCrazytiti
Nuclear plant cooling tower (passthrough)
It's a two pieces nuclear plant cooling tower. Top and bottom look like nuclear warning signs Made with the courtesy of Hegemonie :-)
- Downloads
- 31
- Likes
- 8
- Rating
- 0
P
PrintablesCrazytiti
din 3110 Wrench support (holder)
09/06/2019 : new version in one piece with more strength This is a wall holder for a set of 8 wrench (typically 6-7 8-9 10-11 12-13 14-15 16-17 18-19 20-22) Don't forget to print each part twice. Category: Tool Holders & Boxes
- Downloads
- 31
- Likes
- 2
- Rating
- 0
P
PrintablesCrazytiti
120mm fan grid, cover diag screw
It's a 120mm fan grid with only two tabs in diag. Made this because i want to print 2 on my 210mm bed. Plus i don't need the extra screw
- Downloads
- 30
- Likes
- 7
- Rating
- 0
P
PrintablesCrazytiti
Clod Buster WHeelie Skid
04/2024 : New v2 with BEARINGS ! They come a little short but they will eventually touch the ground as the skid wear... It's a wheelie skid for the well know tamiya clod buster Don't forget to put 4 to secure it. Category: R/C Vehicles
- Downloads
- 30
- Likes
- 6
- Rating
- 0
P
PrintablesCrazytiti
Half sphere for Hermione's Time Turner
I just cut in half the sphere for ease of print. Don't forget to print 2 of each.
- Downloads
- 26
- Likes
- 1
- Rating
- 0
P
PrintablesCrazytiti
Heart shapped articulated fish
This is a remix from 3769457 I need a special gift for my crush next valentine (wish me luck ^^) So I made a version with a heart-shaped hole. There's a plain version and one with mouth too. Category: 2D Art
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
PrintablesCrazytiti
leaf spring frame
A leaf spring frame. Maybe useful for a 4x4 model Instructions Print : 4 wheels 2 frame 4 leaf suport 4 leaf 2 axle 2 "barre transversale" Use acetone to glue leaf support, and frame Use paper clip to get leaf on frame glue axle to leaf…
- Downloads
- 25
- Likes
- 3
- Rating
- 0
P
PrintablesCrazytiti
barbie torso
It's a torso for barbie clothes Remix from a well known torso aka "MULHER_1-2" Category: Toys & Games
- Downloads
- 25
- Likes
- 5
- Rating
- 0
P
PrintablesCrazytiti
SBBB bluetooth speaker
It's a Small Box with Big Bass (at least that's what i want it to be...) https://youtu.be/05p6EjRsf4E Note : the microphone of the camera really doesn't do justice to the sound :-/ Features : True extra bass sound system with Xtra Long…
- Downloads
- 24
- Likes
- 6
- Rating
- 0
P
PrintablesCrazytiti
RC 1/10 buggy-truggy rim
22/06/2025 : add some other wheels size for buggy/crawler tip : print with the face downside and touching bed support for the center hub. Rc 1/10 standard buggy / truggy wheel. width : 50mm inner tyre diameter : 58mm 2 holes for air…
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesCrazytiti
Jeu Jura shutters
It's a shutter for jeu jura wood construction. If you have one you will understand why you need this ;) Don't forget to mirror and duplicate to print both side. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesCrazytiti
Repetier auto-level 0.92.9 for DMY3DP-001 (p802m / anet a8 clone)
All files are on github : https://github.com/crazytiti/Repetier0.92.9-DMY3DP This is preconfigurated repetier firmware 0.92.9 with auto level for DMY3DP-001 3d printer (anet a8 clone with modified melzi electronics) It use the bed sensor…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
PrintablesCrazytiti
Jamo speaker grid pin
This is a replacement pin to hold teh grid of famous Jamo speaker from the 80-90s Work on my jamo D165 Should work on Jamo D serie (265 110 135 ...) Category: Music
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
PrintablesCrazytiti
YAT : Yet Another Tensegrity
Another tensegrity sculpture. This one is a little unstable see the vidéo. https://youtu.be/gH9qLbJsY2M Don't forget to print twice piece2.stl Use M3 screw. Print Settings Printer: diy Rafts: No Supports: No Resolution: 0.33 Infill: 25%…
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
PrintablesCrazytiti
Gears for Nikko Razer
It's spare gears and bearings for the 6x6 nikko razer. Beware you may need some ajustement to make it fit correctly (that's why the solidworks files ares here too) Printed in PLA 100% it seems to be OK for now. Edit : i have made both PLA…
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
PrintablesCrazytiti
Antenna support, hole sides and reinforced-arm for 250 acro
Hi, I made some reinforced arm where the motor support break on crash. Plus a small antenna support edit : I just add sides with holes for USB and jumpers, connections Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesCrazytiti
ZIG ZAG COMB
It a "zig zag" comb to ease the creation of cool haircut ;) Don't forget to print twice Category: Accessories
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesCrazytiti
DMY3DP (P802M clone) X-belt Toothed Idler Tensioner
Remix from remix from remix.... To match my DMYCO DMY3DP-001 (P802M clone) So : wider hole for belt and bearing hole for rods because i keep the original left motor holder use M3 nuts for tighteners Be aware of the thinner guide, try not…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesCrazytiti
Huxley Techzone LM6UU x carriage (narrow)
Another lm6uu replacement carriage for the badly designed techzone x axis. This one is narrow to keep 140+ mm of travel It use only two LM6UU so make sure the zip tie are secured ! To use it you need to replace the imperial rods by 6mm…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesCrazytiti
3 parts profiled propeller
The main idea is to have profiled blade (at least one side on this model) easy to print. This one have 20° blades and an hand made profil. Instructions 1 - print one axle and two blade. 2 - glue together 3 - put on your favorite motor 4…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesCrazytiti
Fix broken PC fan
The idea is to put theses blades over the central original hub (after shaving it's blades) Feel free to resize as you which. You could also ask me for a specific hub or blade size.
- Downloads
- 9
- Likes
- 2
- Rating
- 0
P
PrintablesCrazytiti
Graphic equalizer preset for amplifier
It's a comb with parametric tooth to ease the use of graphic equalizer. You can edit the scad file to suite yours. Alter the number of tooth, their width/height and make your preset.
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesCrazytiti
Hat stick for logitech F710 F510 & F310
This is a replacement stick for logitech gamepad F series. You can print the whole in PLA or print the top in TPU to get better feeling/touch You really have to push them all the way on the potentiometer to make sure that the rounded part…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
These are all currently available results.