Counting matching models…
Snug-fitting plug I made to protect the connector from one of my two batteries on my ebike while not in use. I printed it with dried Filatech Filaflex40 from my Prusa MK4. Printed slowly. 0.2mm layer height. Providing the Fusion 360 file…
Not much to say. It's self explanatory enough.
30mm almost 18g at 100% infill in PETG Almost perfectly round once printed Printed mine at 100% infill, 0.07mm layer height Supports are integrated
Soft jaws I made for holding 1" 1/8 fork pivot. It's magnetic, using Ø10 mm * 5 mm magnets. Make sure before inserting the magnets that the 2 parts would stick together like in the picture, it's much easier for storage and once it's…
Drop-in replacement of the wishbone-shaped piece in the mounting of some Herrmans bicycle lights. This adds plenty of clearance for cables, muddguards, and V-brakes. It might not look great, but it works great :D It's thick for stiffness,…
Tool for driving cleanely a stearing race on your fork with a 1 1/8" stearer (30mm at the base). You don't need the striker if you don't care much about how long it lasts. I made it 219mm long so if you need a longer one, just stretch the…
I printed mine in PETG, 0.40 mm nozzle, 5 vertical walls and 100% infill. It locks the lock in place, I'll probably work on a don't-need-to-unlock-the-lock-to-remove-it mount in the future.
The Decathlon rear view mirror 520 (ref 8600893) didn't fit my bike (and many people's bikes judging by the product reviews on Decathlon's website) as the internal diameter of my handlebar is narrower than the mounting adapter provided…
My bike light that uses a Garmin mount was wobbly and I identified the mount as being the main reason. I made that washer, it works great.
Self explanatory model. Use (up to M6) screws to tighten everything in place. Print the pivot piece with pointy side of the hole pointing up. You might want to shorten the pivot or ideally use a kid's bike fork.
Extends your kickstand. Needs the right kind of kickstand profile. Reuse the button, spring and latch mechanism from your original kickstand. Print as shown in the 3D model screenshot.
Allows for screwing in place the bottom bracket extractor tool by using the crank screw. Works great for me, happy wrenching =) Made for the Shimano TL-UN74, your mileage may vary
These are all currently available results.
