Counting matching models…
Lots of fun with a bubble straw that produces a ton of bubbles for the kids. Use: Make sure the tip of the straw is submerged in the bubble solution for best performance. See the photo with the red line. I've included the .3MF that uses…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
Its that time of the year, lots of birds around my home & work so I created this bird feeder that utilizes the PRUSAMENT spool half as a perch for the birds. The threads are PCO1881 specification, so it should fit most soda bottle types.…
Print approx. €3.40–€4.15 excl. taxPreliminary estimate for one variant
A Soapdish tray for the kitchen or bathroom. Self-draining, large enough to hold soap bottle & sponge. Small version to hold a sponge or soap bar. Filename: 1 x Kitchen_Bath_Soap_Tray_Large_v1.stl Large enough to hold soap bottle & sponge…
My 2 year old daughter wanted a cooking pot for her kitchen...what's a father to do?!? 3D model one of course! Print instructions Unassociated tags: cooking pot., cooking set, kids pot, kitchen pot, kitchen toy, Play Pots , Pretend…
My 2 year daughter has just started playing with Play-Doh. I designed a bunch of fun shapes and Montessori shapes too. My wife is a Montessori Teacher and I thought it would be useful during play time. Enjoy! Print instructions…
My 2 year daughter loves to play with Play-Doh so much I designed a bunch of numbers to go along with the other shapes. 04/26/18 - Update: Added a Revised #1 - One-V2.stl 04/26/18 - Update: Added a Revised #1 - One-V3.stl Enjoy! Print…
I created a stand version from my Christmas tree hanging photo frame found here. Reference: https://www.prusaprinters.org/prints/93150-instax-mini-photo-frame-tree-ornament Add the photo and place wherever you like. Update: 06/06/2022…
Wall mountable case for the Raspberry Pi 3(B/B+). I wanted something I could mount in my enclosures and have power soldered directly to the GPIO pins. Update: 05/09/22 Added v2 to the case models to increase the spacing of the MicroSD…
Well....my daughter somehow lost her key to "start" her Little Tikes Cozy Coupe. As a parent I could not find it if my life depended on it, she hide it well. @_@ Any who I whipped up two different version in Fusion 360 based off some…
A cool little wrench bottle opener that can be quickly printed and added to your keychain/keyring. I've tested and working on standard Coca-Cola bottles. There are two different models to choose from. One with wording or a blank version.…
I have a Ford Focus 2012 (Hatchback) and after 9+ years of prolonged heat, the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Update…
Designed for my Prusa Mini to sit next to the printer on the desktop. It uses 16 x 608ZZ bearings, of course, you don't need to fill all the spots. The bearing slides from underneath and snap in place. Print Settings: Resolution: 0.2mm…
I have a Ford Focus 2012 (Hatchback) and after 5 years of prolong heat the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Print…
Over the years, I've collected various wire cutters/flush cutters from projects and printers. I recently built a new printer enclosure to hold (6) PRUSA printers, I like to have quick access to my tools. I didn't find a wire cutter mount…
I previously designed a window mount for the Eufy camera. As I've switched to a TP-Link Tapo C120 camera, I'd like to share this window mount option for those who need it. It uses the 3M Command Picture Hanging Strips (Medium) found here.…
Recently purchased the Roborock S5 Max and I noticed it would be caught in one of the bedrooms which had a metal hammock with tubular frame. The robot would go over it and get stuck. You can set a no go zone, but I still wanted to have it…
I saw on r/eufy there was a request for a windows mount option similar to the wzye camera. I previously created an outdoor enclosure for the Eufy 2K Camera here: https://www.thingiverse.com/thing:4638649 So creating this didn't take too…
I created a little hanging photo frame for the Instax minis. Add the photo and hang it on the tree or wherever you like. Print Settings: Printer: PRUSA MK3S Resolution: 0.2mm Layer Height (0.4mm Nozzle) Filament: PLA Supports: Optional…
I built an enclosure for my (6) 3d printers, but I didn't have an area to vent hot air without being blocked. I had extra dryer ducting laying around in the garage, so I designed this model to vent the air out. There are (2) different…
I mounted my Ryobi PBLSV717B pet stick vacuum in the closet, but need a solution to store the attachments. Filename: 1 x Ryobi_Vacuum_Accessory_Mount.stl Print Settings: Resolution: 0.2mm or higher Layer Height (0.4mm Nozzle) Filament:…
My 2nd daughter was born a few days ago. I had set up the baby diaper trash can, but I didn't have the holder for the filters. I designed this print as a "print-in-place" model. Use double-sided foam tape or a 3M command strip to secure.…
I love all the USB extension mods for the PRUSA Mini, but I didn't want to mod the screen or have a separate USB extension sitting on the desk. I have my PRUSA Mini on my desk with limited space. I designed this USB extension to sit on…
I recently purchase the Google Pixel 6 to replace my aging OnePlus phone. I had the Spigen wireless charger my wife used to charge her phone. I designed a new stand to hold the wireless charger for my Pixel 6. This might work for other…
I recently purchased the Eufy off amazon because it was very cheap, I have the YI Home outdoor cameras but they are not 2k. Since the Eufy camera was meant for indoors, I designed an enclosure to be used outdoors. There are (2) variations…
The long name “Loona Petbot Charger Wall Backstop” it's designed to help Loona's charging stand not to move side-to-side when Loona comes off the charger or decides to go full speed when docking. This helped my Loona and could help yours.…
Instead of using a 3D-printed arm for the spool, I decided to create a holder with a 6 inch bolt. I designed this hanging spool mount to go under my workbench with my printers. I had lots of bearing leftover from the fidget spinner craze…
I had a few Hexbug Nano toys, but the feet wore out and fell off. The toy became useless, so I designed a replacement set of feet that attach to the bottom of the HexBug. My daughter is enjoying them all over again. Required: Remove all…
To address sunlight affecting my TP-Link C120 camera at certain times, I designed a slide-on sun visor. Product: TP-Link Tapo C120 here: (#ad) https://amzn.to/3JHfkOp Filename: 1 x TP-Link_Tapo_C120_Sun_Visor.stl Print Settings:…
I wanted a tidy solution to mount my TP-Link access points throughout the property. I installed them in closets, the ADU, and the garage using mounts with two screw points that can hold various TP-Link devices. The model was designed to…
I needed a few craft sticks in a pinch, designed these in fusion 360 for my 2 year old daughter. (3) Different sized craft sticks. Regular = 114x10x2 mm Mini = 63x10x2 mm Jumbo = 114x17.5x2 mm Print instructions Unassociated tags: Craft…
I recently purchased the AmpliFi Alien WiFi 6 WiFi System, this includes the standalone mesh point. I spent the weekend running ethernet in the attic to have an access point in the closet in the back of the house via an ethernet backbone.…
I loved LEGO as a kid and still do, so why not create a variation on my previous design to store 3D printer nozzles. 6 storage spots for each size 0.25, 0.4, 0.6, 0.8. BTW they are stackable with the others. Collection:…
My wife and I have nightstands without any way to charge our phone easily. I had these extension cables to reach the stand, so I created a mount to hold the cable underneath the nightstands. Product: https://amzn.to/2A0OKzv Print…
I created a lid for my 1 gal. Metal Paint Bucket so I could use it as a curing station for my Elegoo Mars prints. Materials Needed: 1 x 1 gal. Metal Paint Bucket and Lid - https://is.gd/BV8lXY 1 x Mirror Sheets Flexible Non-Glass Mirror -…
This is a modified version of the S5 Max bumper for the S6 Pure. This was a request by a community member @Jami . They ask to see if could change my design for the S6 Pure vacuum. I do not own this version of the robot vacuum, but with a…
I want this USB hub not to be set on the floor of my garage so I designed two end caps to mount this AmazonBasics USB hub to the wall. Print: 1 x AmazonBasics_Slim_High-Speed_Bottom.stl 1 x AmazonBasics_Slim_High-Speed_Top.stl Product:…
I whipped up this replacement cover for my Artic Cove misting fan after the dogs knocked it over and chewed the battery cover-up. The original cover was only designed to fit a maximum 4amh battery and not the 6amh batteries. I've included…
As my daughter grows older and we learn to play new board games. This gives me the opportunity to design organizers for these new games, most games just come with a baggie to hold all the game pieces. Product: https://amzn.to/2Q3m8tR…
I designed a squash ball foot mod for the RailCore II 300ZL based on the original files. Note: Squash ball will feel a little tight when putting them into the feet, just squeeze and rotate. Amazon: 4 x Squash Balls used -…
My daughter loves card and boards but is absolutely un-organized as a 5yr would be. I love to design different game boxes to help with the process. There are (2) variations of the top lid, one with a logo and one without. Product:…
After purchasing a 2024 Ford Maverick XL, I wanted a tonneau cover and rack system that would fit my truck. I decided on the RealTruck TruXedo Elevate CS Rack System paired with the RealTruck BAK Revolver X4ts Hard Rolling Truck Bed…
I couldn't find a stand for the new TicWatch C2, so I whipped this up in Fusion 360. Simple TicWatch C2 watch stand for the original charging base. Update 1/1/2019: Added a second model "v2", increased the spacing around the charging…
I created a battery adapter to attach an AUKEY 10000 power bank (PB-N83) to the "HTC Vive Deluxe Audio Strap" or "Quest 2 Elite Strap". This battery allows pass-through charging so I wouldn't need to unplug the cable on the headset and…
Vertical stand for my Colgate toothpaste. Might work with other brands, this was modeled after a 6.3oz tube. Filename: 1 x Toothpaste_Tube_Stand_v1.stl Print Settings: Resolution: 0.2mm or higher Layer Height (0.4mm Nozzle) Filament: PLA…
I use my empty spools for wrapping extension cord or Christmas lights. Sometimes the rolls are not large enough for the cords/lights. This little extension work for the PRUSAMENT spools. Print instructions Print Settings: Nozzle: 0.4…
Very specific replacement part, I have the "GE Café™ Series 28.6 Cu. Ft. French-Door Refrigerator" Model: CFE29TSDSS Over time the door engaging plastic piece at the top of the refrigerator was getting worn down and would not engage the…
I purchased the " Sanrio My Melody Interesting Adventure Bento Box " from my local Miniso. Unfortunately, after using it a few times for my daughter's lunches, the latches broke, making it impossible to seal the bento box again. As a…
I have a little 18month old who like to grab things off my desk, I designed this fan cover so if she grabbed it, then she wouldn't stick her finger inside the spinning fan blades. Mini Wacky Waving Inflatable Tube Guy: (ad#)…
I modified my older hanging spool holder designs and adapted them to fit my Anycubic Kossel Linear Plus. v2.0 - https://www.thingiverse.com/thing:3029252 v2.5 - https://www.thingiverse.com/thing:3029317 Required Components: 1 x 5/16…
Another quick design for the ever-growing collection of board/game cards that my daughter and I play. This time for "Mini Brands Grocery Grab" which can be found at Walmart. The game tokens are placed at the bottom and the cards on top…
I have the GE Café™ Series 28.6 Cu. Ft. French-Door Refrigerator (Model: CFE29TSDSS). Over time, the odor filter post broke, which caused the filter to no longer stay securely in place. To fix this, I designed a clip that snaps over the…
These are all currently available results.
