27 models
Update Late Feb 2024: We had far too many wrenches on the bench, so we designed this new Allen wrench holder for all nine sizes. https://www.printables.com/model/776625-ufs-155-t-handle-hex-key-holder-allen-wrench-holde . Stop by and…
New improved version for 2026. It is broken into three parts. https://www.printables.com/model/1622682-ufs-170-ultimate-most-accurate-eiffel-tower-for-it Please send me your feedback. Thanks. I visited France this year and I was in Paris…
The original design was great https://www.prusaprinters.org/prints/22608 but there is always room for improvement. The original designer, Tetralite, did his own update and made a version 3. https://www.prusaprinters.org/prints/74621 . I…
This project had two inspirations. The “Serious Clamp It Square” by J-Max is amazing. https://www.thingiverse.com/thing:1306832 This thing is stiff, which is needed for clamping. It is large and feels strong when you hold it in your…
I’ve been collecting funnel ideas for awhile. I’ve downloaded parametric models that you can customize however you like. I also downloaded several with interesting shapes. This was all because I needed a funnel with a long spout to reach…
I am a semi-professional electronic hobbyist. Normally I would draw electrical diagrams on a computer, but once in a while it can be faster to jot an idea down. I found a very elegant stencil and was almost ready to print it out. But then…
I have a few loose 4mm hex bits. These fit loosely in the 1/4" hex bit holes. I designed a small spacer to fill the gap and make it look nicer. Now I have a nice holder to store all my spare bits. Here is my Hex Bit Holder on…
This is my original design. It is similar to a circle template. The circles match the outside diameter of copper pipe made to imperial standard gage. This was a tool of necessity. I needed a quick way to check every section of installed…
The original mini hex bit driver was both good, and bad. https://www.thingiverse.com/thing:4040548 The good part was the ridges were nicely designed, and gave the handle a lot of grip. It was also a fun idea to have the stubby pop out of…
After adding more t-handle sizes to my model here: https://www.printables.com/model/70527-ufs-094-more-t-handle-hex-allen-key-wrench I suddenly had a bunch of wrench sitting all over my bench taking up space. So I designed a holder for…
So this remix on Thingiverse is actually from a design on Myminifactory. https://www.myminifactory.com/object/3d-print-blink-fox-dice-tower-108734 The design on Myminifactory credits Jukka Seppänen's Blink Fox. But I don't care about…
This is now a much better model than before. I have worked on it for hours to increase the details, and reduce the triangle count. It is much easier to slice and prepare the model for printing. This is a model for the Sarcophagus of…
This is my original design. It is similar to a circle template. The circles match the outside diameter of galvanized or black pipe made to imperial NPT standard gage. This was a tool of necessity. I was insulating pipes under my house. At…
Update February 2, 2024 I've heard that some people had trouble with hole size. I increased the holes for the 2.5 and 3 mm drivers. Thanks to everyone for the feedback. Original Post: I saw this Wiha screwdriver tool holder.…
This part tray lid looked familiar. I was curious about the part. https://www.thingiverse.com/thing:4387454 Months ago, I had printed a similar tray. The lid was designed to fit this parts tray. https://www.thingiverse.com/thing:3710646 I…
A drill bit is easy to turn once by hand, then you have to regrip and do it again. This design allows for continuous turning. Use one hand to hold and push the drill in, while your other hand cranks the drill bit around and around. Easy!…
I have an old Saeco, Aroma, espresso machine. It works fine, and I like the coffee it makes. While surfing Thingiverse files, I saw several espresso funnels and tampers. Many of these were for DeLonghi machines. I figured it was time to…
New improved version for 2026. It is broken into three parts. Currently recommend scaling 160 percent or more, and use 0.3 nozzle settings (hint use 0.3 even if your actual nozzle is larger) especially useful for the middle section. The…
This design follows the approach used by Mitutoyo for their 156-105-10 stand. Their base is narrow and uses the weight of the steel part to keep it stable. I started with their approach, but the light weight plastic would tip over to one…
I have a magnifying glass from a helping hand clamp setup. The glass was sitting around on my bench and it wasn't easy to use by itself. I needed a handle. Thingiverse to the rescue. This handle looked about the best.…
Great design by nghtshd, but there was no goove inside the collet for the wire. I thought it would work better this way. The collet is gooved to allow a bare 22 gage wire. The sleeve was also updated to give room for the coated wire. The…
I wanted a holder for my two bottles. I have a 2oz. bottle of the Insta-Cure+, and a 2oz. bottle for the Insta-Set. They are a good combination for bonding PLA parts. Because I have a crowded desk, they get moved around all the time. I…
I bought this Ryobi Magnetic Steel Nut Driver Set (6-Piece) from Home Depot many years ago. It came with a cheap bit holder. https://www.homedepot.com/p/RYOBI-Impact-Rated-Magnetic-Steel-Nut-Driver-Set-6-Piece-AR2031/308112736 More…
I received some cool new pens for Christmas. These are Parallel Pens by Pilot, https://www.pilotpen.us/brands/other-brands/parallel-pen/ . These are the best calligraphy pens I've seen. A novice like me can do fancy letter shapes. So I…
I liked my CA glue bottle holder https://www.thingiverse.com/thing:4604158 I decided to make one for my epoxy glue bottles. For me, this holds the 4.5 oz., two-part, quick-set epoxy from Bob Smith Industries, about 35.5mm diameter. (Other…
The first bits holder was great for a combination of 1" and 2" (25 and 50mm) hex bits. I still had a lot more 2" length bits to store. So I made this version specifically for these bits. It can hold up to 16 bits. It is very compact. It…
Triple G Workshop has made a tons of amazing projects. I liked the box made to use the Banksy art, but what to put inside? (FYI, the box only is by gillis. If you want other similar box shapes go to his link,…
These are all currently available results.
